JBL Bar 3.1

JBL Bar 3.1

3.1-kanal 4K Ultra HD-soundbar med trådløs subwoofer

Sold from 2018 until now

Getting started with your JBL Bar 3.1

Getting started with your JBL Bar 3.1

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Total Maximun Power
450W
Soundbar Transducer Size
6 x 2.25" racetrack drivers 3 x 1.25" tweeter
Subwoofer Transducer Size
10"
Bluetooth Version
4.2
Max SPL
103db
Frequency Response
35Hz to 20KHz
Audio inputs
1 Analog, 1 Optical, Bluetooth, USB
Soundbar dimension and weight
(Wx H x D) 40” x 2.3” x 3.1” (1018 x 58 x 78mm)/ 2.3 Kg
Subwoofer dimension and weight
(W x H x D) 12” x 12” x 17.3” (305 x 305 x 440mm)/ 12.1 Kg
HDMI Video Inputs
3
HDMI Video Output (with Audio Return Channel)
1
HDMI HDCP Version
2.2

Hør stemmen. Føl bassen.

Med i alt 450 W systemeffekt, en dedikeret centerkanal og en 10” trådløs subwoofer, der leverer medrivende bas og tydelige stemmer, giver JBL Bar 3.1 Soundbar med JBL Surround Sound og Dolby® Digital dig mulighed for at fordybe dig i klassens bedste surround-lyd. JBL Bar 3.1 understøtter Bluetooth til nem trådløs afspilning, og du kan tilslutte op til tre 4K-enheder via HDMI-indgange, så du får en topmoderne billed- og lydoplevelse. Med den dedikerede forstærker og højttalere til centerkanalen kan du glæde dig over den tydelige dialog i selv de vildeste scener. I tilgift får du JBL SoundShift, så du straks kan skifte mellem lyden fra dit tv og lyden fra din mobiltelefon eller tablet. Du kan også betjene soundbaren med din eksisterende tv-fjernbetjening. JBL Bar 3.1 sætter nye standarder for soundbarer.

Den dedikerede centerkanal forbedrer stemmernes tydelighed, så du ikke går glip af et eneste ord.
Udgangseffekten på 450 W kombineret med JBL Surround Sound sikrer en førsteklasses lydperformance til dine film og din musik.
Nyd den fyldige og medrivende bas og de fleksible placeringsmuligheder uden besværlige kabler.
Du kan nemt tilslutte alle dine 4K-enheder og opgradere din hjemmeunderholdning til Ultra HD og HDCP 2.2
Afspil al din musik trådløst fra enhver mobil enhed
Denne JBL-soundbar er designet til at fungere med mange af de mest populære tv-fjernbetjeninger, så du kan bruge din eksisterende tv-fjernbetjening til både dit tv og din soundbar.

FAQs & How-Tos

15 results
  • The JBL Bar series soundbars supports three CEC commands: - System Standby - One Touch Play - Audio Return Channel.
  • Yes. Out-the-box the JBL Bar series soundbar recognizes volume and mute controls from the most common TV remote controls. The JBL Bar series has IR learning. You can use this feature to teach the soundbar to response to your TV's remote control as well.
  • Yes. When SoundShift is active, and your Bluetooth device is connected to your soundbar, you can easily listen to Bluetooth streaming and switch back to the previously selected source just by tapping the pause/play button on your Bluetooth device. When SoundShift is off, your Bluetooth paired device can not interrupt your current source.
  • The soundbar passes through content from a 4K video source but does not upscale video to 4K.
  • Press and hold the Source, Vol+ and Vol- buttons at the same time until you see the text "reset" on the soundbar's display.
  • Normal pairing is automatic, and happens when you first switch both devices on. If pairing does not take place automatically, or you have to force new pairing, here is what to do: Turn on the soundbar and the subwoofer. If the connection is lost, the LED indicator on the subwoofer blinks slowly. Second, press the CONNECT button on the subwoofer to enter pairing mode. The LED indicator on the subwoofer blinks quickly. Third, press and hold the DIM DISPLAY button on the remote control for 5 seconds, followed by short press on BASS+, and BASS- button in sequence. Panel display will show “PAIRING”. If pairing succeeds, the LED indicator on the subwoofer lights up, and the soundbar display will show "DONE”. If pairing fails, the indicator on the subwoofer blinks slowly. Lastly, if the pairing fails, repeat the steps above. If you have continued trouble performing the pairing, please try to switch off all wireless devices in the home, then try again. This means routers, TV sets with wireless functions, telephones, computers etc. Since overcrowding on the 2.4 GHz frequency now often causes problems, eliminating all this activity makes space for the Bar to establish its connection, and you should be able to pair without problems. Afterwards, you can switch your devices on again. Often, all will now work fine, and if not, you will know which devices are doing the interference.
  • Every TV is different, but most current TVs will let you turn off your internal TV speakers in the Settings menu under the Audio section.
  • The TV turns on with the soundbar. This is caused by CEC commands from your TV via the HDMI port. Please disable these functions on your TV, to use the soundbar while TV is off.
  • The speaker uses Bluetooth version 4.2 but does NOT support APT X.
  • Yes. All but the Bar Studio model have an LED display on the soundbar's front panel. The display tells which source input, volume level, and sound feature you are on. You are able to dim the display, using the remote, during low light usage.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00