JBL Cinema Base
Home Cinema 2.2 - al-i-én lydbase til dit tv
Sold from 2014 until 2018
Getting started with your JBL Cinema Base
Quick Start Guide & Downloads
Product Specifications
- Type
- Dual 6" (150mm) polypropylene woofers
- Sensitivity
- 93 dB (2.83V/1m)
- System Frequency Response
- 45Hz – 20kHz
- Speaker Depth (mm)
- 600 mm
- Speaker Width (mm)
- 102 mm
- Speaker Weight (lb)
- 17.6 lb
- Speaker Height (in)
- 15.8"
- Speaker Height (mm)
- 401.6 mm
- Speaker Weight (kg)
- 8 kg
- Speaker Depth (in)
- 23.6"
- Speaker Width (in)
- 4"
Home theater sound now fits under your TV
JBL Cinema er det perfekte supplement til dit fladskærms-tv. Du får imponerende virtuel surround-lyd i en enkel og elegant pakke.Alt-i-en-formen passer perfekt under de fleste fladskærme op til 60". Forbindelsen til tv'et klares med et enkelt kabel (HDMI™, optisk eller analogt), og musik kan afspilles trådløst fra mobiltelefoner og tablets med Bluetooth®.Effekten på 240 watt driver de indbyggede højttalere, inklusive den integrerede og individuelt justerbare dobbelte subwoofer. En særlig finesse er Harman Volume, der forhindrer pludselige spring i lydstyrken. Produktet kan også lære lydstyrke-signalet fra din tv-fjernbetjening, så du får enklere kontrol over din biograf-oplevelse.Brug USB-porten i siden til at oplade din telefon eller tablet. Det unikke metalliske højttalergitter er både elegant og let at rengøre.
FAQs & How-Tos
-
Harman Volume on the Cinema Base has no levels, it's either on or off. It will remember the last setting when it's powered on. When you enable Harman Volume, you will hear audio feedback ( 4 tones going up when you turn it on, and 4 tones going down when you turn it off ) There is no visual indication that shows if it's on or offWas this helpful? Thank you for your feedback!
-
Yes, this can be done very easily by doing the following procedure: 1: Power on the Cinema Base. 2: Simultaneously press the “Surround” and “VOL –” buttons (at the same time). 3: The Cinema Base source LED button will light amber in color, for 1 second, then the power button LED light will go off and on. 4: Your Cinema Base is now reset.Was this helpful? Thank you for your feedback!
-
The subwoofer output on the CinemaBase, it's a filtered signal. By that we mean, it is not a full frequency signal, but filtered to match the low frequencies for a subwoofer.Was this helpful? Thank you for your feedback!
-
Yes, that is possible. 1: Turn on your Cinema Base. 2: Press surround and volume - button simultaneously for 5 seconds. 3: When the source button on the Cinema Base lights amber for 1 second and goes off after. 4: Your Cinema Base is now reset.Was this helpful? Thank you for your feedback!
-
Voltage is 100 - 240 Volt AC. Maximum power consumption is 120 Watts.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00