



BAR 800
Få filmaftenen til at flyve, og lad din musik flytte dig til nye højder med 720 W samlet udgangseffekt og medrivende bas fra 10"-subwooferen. JBL Bar 800 med Dolby Atmos® indeholder to opadvendte enheder og aftagelige batteridrevne surroundhøjttalere, der skaber en omsluttende 3D-biografoplevelse, uden at du behøver trække ekstra kabler. Du vil aldrig gå glip af et ord med vores PureVoice-teknologi, som sikrer tydelige samtaler, selv når andre lyde er på det højeste niveau. Og når du er klar til at slå dig løs, kan du streame din yndlingsmusik via AirPlay, Alexa MRM eller Chromecast built-in™. Dine fester bliver bedre end nogensinde.
Product Specifications
General Specifications
Strømforsyning | 100-240 V AC, ~ 50/60 Hz |
---|---|
Netværkets strømforbrug ved standby | < 2,0 W |
Driftstemperatur | 0 °C - 45 °C |
Audio Specifications
Samlet højttalerudgangseffekt (maks. ved THD (total harmonisk forvrængning) 1 %) | 720 W |
---|---|
Soundbarens udgangseffekt (maks. ved THD (total harmonisk forvrængning) 1 %) | 340 W |
Udgangseffekt for surroundhøjttaler (maks. ved THD (total harmonisk forvrængning 1 %)) | 2 x 40 W |
Subwooferens udgangseffekt (maks. ved THD (total harmonisk forvrængning) 1 %) | 300 W |
Soundbar-transducer | 3 x (46x90) mm racetrack-enheder, 3 x 0,75" (20 mm) diskanthøjttalere, 2 x 2,75" (70 mm) opadrettede fuldtoneenheder |
Omgivende højttalertransducer | 1x (46x90) mm racetrack-enheder |
Subwoofer transducer | 10" (260 mm) |
Frekvensområde | 35 Hz - 20 kHz (-6 dB) |
Lydindgange | 1 optisk, Bluetooth, Chromecast built-in, Airplay, Alexa MRM, USB (USB-afspilning er kun tilgængelig i den amerikanske version. I andre versioner er USB kun til servicebrug.) |
Dimension Specifications
Samlede soundbar-dimensioner (B x H x D) | 1174 x 56 x 120 mm |
---|---|
Hovedmål på soundbar (B x H x D) | 884 x 56 x 120 mm |
Mål på hver aftagelig surroundhøjttaler (B x H x D) | 145 x 56 x 120 mm |
Subwooferens dimensioner (B x H x D) | 305 x 440.4 x 305 mm |
Soundbarens vægt | 3,4 kg |
Vægt af hver aftagelig surroundhøjttaler | 1,3 kg |
Subwooferens vægt | 10 kg |
Pakkens mål | (B x H x D) |
Pakkens vægt | 18,9 kg |
Control Connect Specifications
USB-port | Type A |
---|---|
USB-strømdata | 5 V DC, 0,5 A |
Understøttede filformater | MP3 |
MP3-kodeks | MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3 |
MP3-samplingfrekvens | 16 - 48 kHz |
MP3-bitrate | 80-320 Kpbs |
Bluetooth-version | 5.0 |
Bluetooth-profil | A2DP 1.2, AVRCP 1.5 |
Frekvensområde for Bluetooth-sender | 2400 MHz - 2483,5 MHz |
Bluetooth-sendeeffekt | < 15 dBm (EIRP) |
Wi-fi-netværk | IEEE 802.11 a/b/g/n/ac/ax (2,4 GHz/5 GHz) |
2,4G wi-fi-senders frekvensområde | 2412-2472 MHz (2,4 GHz ISM bånd, USA 11 kanaler, Europa og andre 13 kanaler) |
2,4G wi-fi-sendereffekt | <20dBm (EIRP) |
5G wi-fi-senders frekvensområde | 5,15-5,35 GHz, 5,470-5,725 GHz, 5,725-5,825 GHz |
5G wi-fi-sendereffekt | 5,15-5,25 GHz <23 dBm, 5,25-5,35 GHz og 5,47-5,725 GHz <20 dBm, 5,725-5,825 GHz <14 dBm (EIRP) |
2,4G trådløs senderfrekvensområde | 2406 - 2474 MH |
2,4 G trådløs sendereffekt | <10 dBm (EIRP) |
Documents & Downloads
Manuals
Other
Lynvejledning (flersproget)
Konformitetserklæring (EU)
Firmware update for JBL Bar 800 and JBL Bar 1000 Version 22.34.55.80.00 (Global, Excluding China)
JBL Bar 800 Tech Backgrounder
Firmware update for JBL Bar 800 and JBL Bar 1000 Hotfix Version 22.43.61.80.00 (Japan only)
Firmware update for JBL Bar 800, Bar 1000 and Bar 1300 OTA1 Version 23.16.21.80.00
Firmware update for JBL Bar 800 and JBL Bar 1000 Hotfix Version 23.26.51.80.00
JBL Global Warranty Card
Datablad (Engelsk)
Betjeningsvejledning (Engelsk)
Datablad (Dansk)
Betjeningsvejledning (Dansk)
Gallery




















Videos
What’s in the Box
- 1x hovedsoundbar
- 2x aftagelige trådløse surroundhøjttalere
- 1x trådløs subwoofer
- Fjernbetjening med 2 x batterier
- Strømledninger (op til 8 stk. afhængigt af regionens varenummer)
- 1 x HDMI-kabel
- 2 x L-formet vægmonteringsbeslag (hovedbjælke) + 2 x U-formet vægmonteringsbeslag (til surroundhøjttalere) sæt med skruer
- 4 x sidehætter
- Startguide
- Sikkerhedsinstruktioner og garantikort
- Vægmonteringsskabelon

FAQs & How-Tos
What happens if I connect both HDMI eARC and optical to the TV input?
The soundbar will auto switch the source between HDMI eARC and optical. HDMI eARC is higher priority than optical source. It is not possible to manually switch from HDMI to optical.
Was this helpful?
Thank you for your feedback!
What does the Sound Calibration function do?
The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.
Was this helpful?
Thank you for your feedback!
Can I create my own custom equalization settings?
Yes!
By using the JBL ONE app, you can change the equalization settings of the speaker to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:
By using the JBL ONE app, you can change the equalization settings of the speaker to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:
- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful?
Thank you for your feedback!
Learn how to troubleshoot when you can’t connect your Google Assistant device to your home Wi-Fi network.
The Checklist
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.
- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.
Was this helpful?
Thank you for your feedback!
How to reconnect the subwoofer
(1) On the subwoofer's rear panel, press and hold the pairing button until the LED turns fast, flashing white.
(2) To enter the subwoofer pairing mode on the soundbar, press and hold the bass button on the remote control for more than three seconds. Then, press VOL - on the remote control.
On the soundbar LED display:
→ "SUB PAIRING": The subwoofer is ready for pairing.
→ "SUB PAIRED": The subwoofer is connected.
(2) To enter the subwoofer pairing mode on the soundbar, press and hold the bass button on the remote control for more than three seconds. Then, press VOL - on the remote control.
On the soundbar LED display:
→ "SUB PAIRING": The subwoofer is ready for pairing.
→ "SUB PAIRED": The subwoofer is connected.
Was this helpful?
Thank you for your feedback!
How do I rename my device?
(1) Select the JBL speaker/soundbar you want to rename
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVE
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVE
Was this helpful?
Thank you for your feedback!
How to save your favorite music to the My Moments feature
(1) Use JBL One App to set up the My Moment Feature.
(2) Select the JBL speaker/soundbar you want to set your favorite music to the My Moment feature.
(3) Tap the My Moment card to assign music.
(4) Click Add Music to manage music streaming services and specific music tracks.
(5) Set the timer to inactive speaker/soundbar (optional)
(6) Set the music loudness (optional)
(7) Press SAVE
(2) Select the JBL speaker/soundbar you want to set your favorite music to the My Moment feature.
(3) Tap the My Moment card to assign music.
(4) Click Add Music to manage music streaming services and specific music tracks.
(5) Set the timer to inactive speaker/soundbar (optional)
(6) Set the music loudness (optional)
(7) Press SAVE
Was this helpful?
Thank you for your feedback!
How long does it take to fully charge the surround speakers?
The surround speaker takes up to 4 hours to fully charge.
Was this helpful?
Thank you for your feedback!
When using the JBL One app to set up my speaker, my Wi-Fi network is not appearing in the list. How can I connect to my Wi-Fi network?
You can manually type in the network name (SSID) and password to connect if the network does not appear.
Was this helpful?
Thank you for your feedback!
What does the Auto-Off function in the Music streaming App menu do?
It is a feature that allows you to set a timer to turn off the device automatically.
For example, you can set it to "never" or 15, 30, 45, and 60 mins.
For example, you can set it to "never" or 15, 30, 45, and 60 mins.
Was this helpful?
Thank you for your feedback!
How can I get further technical service?
In the JBL ONE App:
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product Support
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product Support
Was this helpful?
Thank you for your feedback!
SMART MODE: Lacking Dialogue/Too Much Surround
When listening to multichannel content you may find that your dialogue isn’t coming in as clear, or your surround effects are louder than you’d like. Our sound bars have a feature called ‘Smart Mode’ that implement our unique JBL Surround Sound as well as other tailored EQ settings. While these are great for content that needs a helping hand, for some multi-channel content it can be overwhelming. If you find this to be the case with some content, you can disable ‘Smart Mode'.
To toggle between smart mode and standard surround, on the remote control, press and hold MUTE for more than 3 seconds, then press Volume Up (+). "OFF SMART MODE" or "ON SMART MODE" will be displayed.
To toggle between smart mode and standard surround, on the remote control, press and hold MUTE for more than 3 seconds, then press Volume Up (+). "OFF SMART MODE" or "ON SMART MODE" will be displayed.
NOTE: The sound bar defaults to smart mode every time the bar is turned on.
Was this helpful?
Thank you for your feedback!
BAR 800 & BAR 1000: Software Update Release Notes
BAR 800 & BAR 1000
Software Update Release Notes
------------------------------------------------------------------------
Version: V 22.34.55.80.00
Release Date: September 09, 2022
Release Media: OTA (over the air) Automatic Upgrade and/or USB
Filename: JBL_Bar_800_1000_ver_22.34.55.80.00.zip
What’s New
Software Update Release Notes
------------------------------------------------------------------------
Version: V 22.34.55.80.00
Release Date: September 09, 2022
Release Media: OTA (over the air) Automatic Upgrade and/or USB
Filename: JBL_Bar_800_1000_ver_22.34.55.80.00.zip
What’s New
- Improved the LED display behavior for a better user experience.
- Optimized the charging experience for the detachable surround speaker.
- Improve Wi-Fi music streaming connectivity.
Instructions for software upgrade Via USB upgrade:
Via auto update over Wi-Fi:
|
Was this helpful?
Thank you for your feedback!
What does the Moment button do?
It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
Once set up, you can directly access it through the remote control or within the JBL ONE App.
Once set up, you can directly access it through the remote control or within the JBL ONE App.
Was this helpful?
Thank you for your feedback!
How to adjust the surround speaker sound level?
With both detachable surround speakers undocked, you can select the surround sound level by pressing the REAR button on the remote control.
Was this helpful?
Thank you for your feedback!
How to charge the detachable surround speaker?
The surround speakers can be recharged through the USB-C connection, located on the side of the speaker. The speakers can be charged by docking them in the soundbar also.
Was this helpful?
Thank you for your feedback!
My product is not found during setup. How do I solve that?
- Ensure that your JBL One app device is less than 10m/33ft from the speaker during the initial set-up.
- Ensure it is plugged into power and the power LED is illuminated.
- Unplug the power cord, wait 10 seconds, reconnect the power cord and allow the speaker to power up.
- Temporarily relocate either the speaker or router so that they are closer together. If the connection succeeds, the original location may be too far from the router to maintain a stable connection.
- Try using a different device with the JBL ONE app installed and connected to your home network.
Was this helpful?
Thank you for your feedback!
How to adjust the Dolby Atmos level?
You can adjust the amount of audio coming from the upfiring speakers by pressing the "ATMOS" button on the Remote control and switch between middle (default), high or low.
Was this helpful?
Thank you for your feedback!
How do I fix AirPlay not streaming music to my speaker/soundbar?
If you cannot stream music with AirPlay, use the JBL One App;
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.
Was this helpful?
Thank you for your feedback!
Can I use the speaker/soundbar without the App?
Yes, however, the JBL ONE App gives you another level of control over the speaker/soundbar.
Through the App, you can personalize the speaker/soundbar's performance, such as:
Through the App, you can personalize the speaker/soundbar's performance, such as:
- Customizing EQ settings
- Setting up our new feature called: My Moment
- Connect your favorite streaming music services.
Was this helpful?
Thank you for your feedback!
What is Dolby Atmos and what does it do?
Dolby Atmos is a 3D surround sound format.
Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel.
Note: This feature only applies to Dolby Audio content.
For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos.
Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel.
Note: This feature only applies to Dolby Audio content.
For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos.
Was this helpful?
Thank you for your feedback!
How can I get a software update?
Once the speaker/soundbar is connected to the network, software updates will automatically be sent to the product through Wi-Fi or the internet, if available
Was this helpful?
Thank you for your feedback!
How to find the MAC address
NOTE: Apple IOS users are not able to find their MAC address in Google Home app due to privacy policies in the USA and European market.
We advise setting up your device on a less secure network. Log into the router and retrieve the MAC address for your device then add it to your preferred network.Instructions below are for Android only
- Open your Google Home app
- Enable Bluetooth
on your device.
- Enable Location service
on your Android device.
- Remember to "Allow" Google Home to view your location while using the app (You are asked during setup of the Google Home app).
- In case you denied access go to Settings
Apps
Google Home
Permissions
Allow to view Location.
- When you at selecting the Wi-Fi network from the list of available networks, before tapping on your network you need to get the MAC address.
- Tap the
located top right corner.
- In the pop-up menu press "Show MAC address"
Write down the MAC Address.
- Tap the
You can now add the MAC address to your local Wireless router or system if your configuration requires this before installing the device on your network.
Finding the MAC address after speaker is installed
- Open your Google Home app
.
- Tap on to view your home.
- Find your room
.
- In the top right corner tap Settings icon
.
- Scroll down to the bottom of the screen. You will see some system information and the MAC address as well.
Was this helpful?
Thank you for your feedback!
How to do the surround speaker calibration?
There are two steps in the calibration
- Place the surround speakers beside your seating position and press the CALIBR button on the remote control. Follow the instruction to start the 1st calibration
- After the 1st calibration done, place the surround speakers in your desired location and press CALIBR on the remote control to start the 2nd calibration
Was this helpful?
Thank you for your feedback!
What does the Audio Sync function do?
Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00