JBL Flip 6

JBL Flip 6

Bærbar vandtæt højttaler

Sold from 2021 until now

Predecessor Product: JBL Flip 5

Getting started with your JBL Flip 6

Getting started with your JBL Flip 6

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Udgangseffekt (W)
30
Dynamisk frekvensområde (Hz)
63 Hz - 20k Hz
Mål (cm)
17.8 x 6.8 x 7.2
Mål (inch)
7 x 2.6 x 2.8
Vægt (kg)
0.55
Vægt (lbs)
1.21
Bluetooth-profiler
A2DP 1.3, AVRCP 1.6
Bluetooth-frekvens
2400 MHz - 2483.5 MHz
Bluetooth sender-modulation
GFSK, π/4 DQPSK, 8DPSK
Bluetooth sender-effekt
< 10dBm (EIRP)
Bluetooth-version
5.1
Ladetid (timer)
2.5
Spilletid (timer)
12
Bluetooth
Ja
Charging cable
Ja
JBL PartyBoost
Ja
Vandtæt
Ja
Wireless
Ja
Genopladeligt batteri
Ja

Kraftfuld lyd til ethvert eventyr

Dit eventyr. Dit soundtrack. Den iøjnefaldende JBL Flip 6 leverer kraftfuld JBL Original Pro Sound med exceptionel klarhed takket være et tovejs højttalersystem med en optimeret racetrack-enhed, separat diskantenhed og to pumpende basradiatorer. Denne store, men alligevel nemt bærbare højttaler, er vand- og støvtæt, så du kan tage den med overalt i al slags vejr. Og med 12 timers batteritid kan du feste, indtil solen går ned – eller står op – uanset hvor musikken bevæger dig hen. Brug PartyBoost til at forbinde flere kompatible højttalere. Flip 6 fås i flere fede farver.

Beatet fortsætter med JBL Flip 6, der med sit tovejs-højttalersystem er udviklet til at levere høj, krystalklar og kraftfuld lyd. Dens racerbaneformede bashøjttaler leverer exceptionelt lave frekvenser og mellemtone, mens en separat diskanthøjttaler producerer sprøde, klare, høje frekvenser. Flip 6 har også to optimerede passive radiatorer til dyb bas, som er finjusteret ved hjælp af Harmans avancerede algoritme.
Med til poolen. Med i parken. JBL Flip 6 er IP67-vand og -støvtæt, så du kan tage din højttaler med overalt.
Spild ikke tiden med at oplade dit batteri. JBL Flip 6 giver dig op til 12 timers spilletid på en enkelt opladning.
Kraftfuldt design og kraftfuld lyd. Den lyder stort, men er alligevel nem at bære, og designet matcher enhver personlig stil. Stil den lodret eller vandret, og vælg mellem en række festlige farver.
Med PartyBoost kan du parre to JBL PartyBoost-kompatible højttalere for at få stereolyd. Eller du kan forbinde flere JBL PartyBoost-kompatible højttalere for at sætte ekstra gang i festen.
Maksimer din lydoplevelse med JBL Portable-appen. Få opdateringer og produktsupport direkte fra din telefon. Du kan låse op for funktioner, forstærke din lyd eller justere bassen, så du har total kontrol over din lyd.
Lad op uden bekymringer. JBL Flip 6 har USB-C-opladningsbeskyttelse. Det betyder, at en påmindelseslyd vil advare dig om at tage stikket ud, hvis stikket registrerer vand, salt eller andre kemikalier.
Forbind op til to smartphones eller tablets til højttaleren, så I kan skiftes til at nyde den ægte JBL Original Pro Sound.
JBL har forpligtet sig til en mere bæredygtig og miljøvenlig emballageløsning. Flip 6 er pakket i en genanvendelig papirbaseret æske. Det gælder også den indvendige bakke. Plastikbøjlen er over 90 % genbrugt, og ydersiden er trykt med sojablæk.

FAQs & How-Tos

13 results
  • You will need to dry the charging port completely before plugging in power for charging.
     
  • This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.
  • This speaker does not have an Aux Input, so no analog connection is possible.
  • Our FLIP 5 speaker is an "All-weather companion," and sometimes it can get dirt and other substances on it. Clean your speaker under lukewarm water from your water tap, and use a microfiber cloth to remove stains. Do not use any alcohol or other to remove stains and dirt. Do not charge your product while the charging port is wet; make sure it is dry before you connect it to a charger. Contact our Customer support if you need more advice.
  • If you encounter issues using the speaker with your phone or tablet, or you want to remove all previous Bluetooth pairings from the speaker, it may be necessary to 'factory reset' the speaker.

    How to reset
    First, remove or forget the speaker from the list of paired Bluetooth devices in the settings of the phone or tablet.
    Then, with the speaker powered on, press and hold the Volume + and Play buttons simultaneously for 3 seconds until the unit turns off.
    The speaker has now been restored to factory default settings. 
  • This product is rated IP67, which is different from IPX7. IP67 protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant against dust. Dust accumulation around electronics can lead to hardware failure, so the IP67 rating is an extremely beneficial addition to this product. 
  • You cannot download the JBL Portable App on a PC. This app is only available on mobile devices.
  • If you create a Stereo Pair using the JBL Portable App and you come within range of additional PartyBoost compatible speakers while they are ON, the app will find these speakers. This will break the stereo pair and create a mono PartyBoost group that includes all active speakers that are in proximity. This only happens when the JBL Portable App is actively running on the source device, including when it is running in the background, and when these other speakers are ON. To avoid this scenario, make sure the app is completely closed, without running in the background before coming near any additional PartyBoost speakers that happen to be ON.


    NOTE: The Portable App does not need to be running in order to enjoy Stereo sound from two speakers

  • The new PartyBoost does not support the previous Connect and Connect+ features. For example: You will not be able to successfully connect the new PartyBoost enabled Flip 5 with a Connect+ enabled speaker like the Pulse 3 or Flip 4. You will not be able to connect the Boombox 2 to the original Boombox speaker.

  • 1. Connect the first Partyboost speaker with your phone and keep music playing (for best results play music on this speaker for more than 20 seconds before proceeding with the next steps).
    PartyBoostBluetoothButton.png
    2. Press the Partyboost button on the first speaker.
    3. Turn on the second speaker that you want to connect in Partyboost mode.
    4. Now press the Partyboost button on the second speaker.
    5. After a few seconds, both Partyboost speakers should connect and play together.
    It can take a few seconds after music is started before sound will be heard from both speakers.
    This is also the process for connecting more than two speakers in Party mode, simply turn on the other compatible speakers and press the Partyboost buttons. PartyBoostButtonsGroup.png
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00