JBL PartyBox Ultimate
JBL PartyBox Ultimate er en kæmpestor, kraftfuld festhøjttaler med fremragende JBL Pro Sound og et levende lysshow. Den er stænksikker og har robuste hjul, så den er nem at transportere.
Sold from 2023 until now
Getting started with your JBL PartyBox Ultimate
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Udgangseffekt (W)
- 1100
- Dynamisk frekvensområde (Hz)
- 30Hz-20KHz (-6dB)
- Mål (cm)
- 45.5 x 105.0 x 44.0
- Mål (inch)
- 17.9 x 41.3 x 17.3
- Vægt (kg)
- 39.5
- Vægt (lbs)
- 87.1
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.5
- Bluetooth-frekvens
- 2400 MHz – 2483.5 MHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth sender-effekt
- ≤15dBm (EIRP)
- Bluetooth-version
- 5.3
- Built-in Wi-Fi
- Ja
- 3,5 mm lydindgang
- Ja
- Bluetooth
- Ja
- JBL One App
- Ja
- Lysshow
- Ja
- Stænksikker
- Ja
- Wireless
- Nej
- IPX-rating
- IPx4
- -
- *Der kræves et abonnement på en HD-musiktjeneste for at lytte til omsluttende musik i Dolby Atmos. Tjek abonnementsgebyrer i din region.
Hold fest uden begrænsninger
JBL PartyBox Ultimate udfylder al den plads, du har, med den overlegne originale JBL Pro Sound, der er optimeret med en omsluttende Dolby Atmos-oplevelse via wi-fi*. Fordi alle til en fest elsker kraftfuld lyd, uanset om de viser det på dansegulvet eller rocker med på sidelinjen. Dine gæster vil fryde sig over den krystalklare lyd, selv ved høj lydstyrke, og over det store, imponerende lysshow med fængslende stjernelys, seje lysspor og strobe-effekter, der alle bevæger sig i takt med dit beat. Gør det nemt ved at streame din foretrukne party-playliste.. Eller gå selv på scenen ved hjælp af indgangene til to mikrofoner og en guitar. Uanset hvordan festen udfolder sig, kan du skabe dit eget festflow med de sjove interaktive effekter fra JBL PartyPad™. Planlægger du noget endnu større? Gør din fest til en mega-begivenhed. Trådløs parring og tilslutning af flere højttalere er nemme at konfigurere og tilpasse med JBL One-appen. Den stænksikre JBL PartyBox Ultimate justerer selv lyden, så den lyder bedst muligt, uanset hvor du sætter den op. Tænk på den mest suveræne fest nogensinde - og gør den så større. Det er, hvad JBL PartyBox Ultimate er skabt til.
FAQs & How-Tos
-
The top panel LEDs are flashing because the OTA firmware update is in progress, the product should work after the upgrade is completed. It may have been caused by a previous interruption to an update.
It should be possible to resolve the issue by doing the following:
- Plug in the power cable and wait for at least 5 minutes for the Partybox Ultimate to complete the update.
- If the Partybox Ultimate stops flashing, but cannot power on, then perform a factory reset by pressing the two buttons below for more than 10 seconds: Moment (heart symbol) and Play (or through the JBL One app). After this has been done, press the Power button.
Was this helpful? Thank you for your feedback! -
Yes!
By using the JBL ONE app, you can change the equalization settings of the speaker to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful? Thank you for your feedback! -
You can use the PartyLight Sticks and the PartyLight Beam with older PartyBox speakers. The built-in sound detection algorithm sync the light with the music from the speaker.
The light also works if you don't own a PartyBox speaker as a built-in mic with a music detection algorithm automatically finds and syncs to any music device that's playing.
Was this helpful? Thank you for your feedback! -
Yes, however, the JBL ONE App gives you another level of control over the speaker/soundbar.
Through the App, you can personalize the speaker/soundbar's performance, such as:- Customizing EQ settings
- Setting up our new feature called: My Moment
- Connect your favorite streaming music services.
Was this helpful? Thank you for your feedback! -
For the best PartyLight Stick and PartyLight Beam performance, connect it by using a JBL Auracast™-enabled PartyBox models such as the PartyBox Club 120, Stage 320 and Ultimate.
Was this helpful? Thank you for your feedback! -
This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.Was this helpful? Thank you for your feedback!
-
Once the speaker/soundbar is connected to the network, software updates will automatically be sent to the product through Wi-Fi or the internet, if availableWas this helpful? Thank you for your feedback!
-
In the JBL ONE App:
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product SupportWas this helpful? Thank you for your feedback! -
If you cannot stream music with AirPlay, use the JBL One App;
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.Was this helpful? Thank you for your feedback! -
(1) Select the JBL speaker/soundbar you want to rename
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVEWas this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
