JBL Pulse 3

If you are having trouble with distortion or drop outs, try the following suggestions:

Move the audio source closer to the speakers

Move the speakers closer to each other

Make sure the streaming speaker (host) only connects to one audio source, disconnect the Bluetooth connection between the streaming speaker (host) and other audio source

Make sure the audio source only connects with one streaming speaker (host), disconnect the Bluetooth connection between the audio source and other speakers

Restart both your speakers and the audio source

Make sure speakers are away from other sources of wireless signal – you could be experiencing interference

Re-pair the audio source with your speaker

If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speaker

If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.

You need to dry the micro USB or power ports completely before plug-in power for charging.

You can change the JBL Pulse lightshow via JBL Portable app.

1. Connect the Pulse with your phone, open the JBL Portable app and wait for app to recognize your speaker.  
2. Click the Lightshow button to enter the lightshow set-up
3. Swipe left and right to change lightshow
4. Swipe to customized page, to select your favorite pattern and customize your lightshow
5. Click the color wheel to change color or enter camera color picker
6. Click the brightness button to adjust brightness of the lightshow

                                                                                                                                       

1. In order to change the name of the speaker, you must first connect your speaker via Bluetooth and then download the JBL Connect app.
2. Once the app is downloaded choose app and wait for it to recognize your device.
3. Now that your speaker is highlighted, choose the gear located either below or to the right of the speaker image.
4. Once you choose the gear you will have the option to edit the name by clicking on the small pencil icon.
5. After you change the name, you will see a notification stating to "Reconnect to  Apply New Name"
6. Go to your Bluetooth settings select "Forget This Device" and then reconnect to establish the new speaker name.

If there are drop out or connection issues when using PartyBoost or Connect+, it could be one of three things.

1.      Units are too far apart (move units closer together) 

2.      Interference from other 2.4gHz wireless units in the area.

3.     Unit is no longer working as designed

Here are some steps to isolate the issue:

 Try taking the units out of the house and test it outside with no interference to see if you still experience connectivity issues. If you still experience connectivity issues, please try steps below:

Whatever unit drops off, remove that from the chain. Test the rest of the speakers and keep doing it until you find the speaker that is causing the drop outs.  If all speakers begin to drop off, please try a different order and repeat. Repeat this process with each unit being the “main speaker”. 

 Make sure to turn off all WiFi/RF devices. (Router, laptop, baby monitor, Nest cams, IP cams, WiFi switches, WiFi outlets, WiFi lights, cordless phones, etc.) 

You should be able to identify the issue/speaker by following these steps. 

Yes, it is needed to close the USB cap completely for waterproof.

You can connect 2 smart devices ( iOS or Android ) simultaneously by Bluetooth. One when connecting via AUX cable.

• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.

Power on the JBL Pulse 3 For 5 seconds, press and hold the "Volume +" and "Play" buttons The JBL Pulse 3 will power off, and is now reset