JBL Horizon
Bluetooth®-clockradio med USB-opladning og stemningslys
Sold from 2016 until now
Getting started with your JBL Horizon
Documents & Downloads
Product Specifications
- Udgangseffekt (W)
- 2 x 5
- Frequency Response
- 70Hz - 20kHz
- Mål (cm)
- 16 x 18.3 x 8.6
- Mål (inch)
- 6.29 x 7.2 x 3.38
- Vægt (kg)
- 0.89
- Vægt (lbs)
- 1.96
- Bluetooth
- Ja
- Lysshow
- Ja
- Powerbank
- Ja
- Wireless
- Ja
Wake up to eye-opening JBL sound
Med JBL Horizon-clockradioen begynder din dag med JBL-stereolyd, der udfylder hele lokalet, beriget med den stemningsfulde glød fra LED-lamperne. Horizon har to separate alarmer, der kan indstilles til dig og din partner. Vågn op til én af tre originale digitale alarmtoner, din foretrukne FM-station, musik fra din smartphone via Bluetooth eller en traditionel summetone. Radioen har fem programmerbare FM-stationer og kan desuden afspille musik trådløst fra enhver Bluetooth-telefon eller -tablet. Horizon har et kompakt design, der egner sig til placering på alle natborde og køkkenhylder. Det skarpe LCD-urdisplay har en indbygget sensor, der automatisk justerer lysstyrken efter de omgivende lysforhold. Med de to USB-porte kan du hurtigt oplade telefoner, tablets og andre bærbare enheder. Den store slumre/lys-knap og det klare LCD-display gør JBL Horizon let at betjene, selv når du er døsig, og det indbyggede system til batteri-backup sikrer, at du altid vågner – selv i tilfælde af strømsvigt.
FAQs & How-Tos
-
Yes, if a telephone is connected via Bluetooth to Horizon, this is possible. When adjusting the wake-up timer, there will be an option to select various wake-up tones, or Bluetooth sound. Select Bluetooth as source, while the telephone is playing the music stored locally, or streaming what you want as wake-up music. When the wake-up adjustment is finished, music will be playing over Bluetooth through the Horizon. Press Pause on the source telephone, or press the round selector button (between the two arrow-buttons) on the Horizon to pause the music. Now the system is ready to wake you up with Bluetooth music. When wake-up time arrives, Horizon sends a Play command to the telephone, and music plays via Bluetooth. You can use music that is stored in the phone, use Spotify or play from the cloud. This has been tested with both iPhone 6 and Samsung S6, and should work flawlessly.Was this helpful? Thank you for your feedback!
-
Horizon's alarm sounds for 3 minutes, then it shuts off, or rather it goes into snooze, for 9 minutes. Then it sounds the alarm again for 3 minutes, followed by snooze for another 9 minutes. After this final snooze period, it starts playing, and keeps on playing until it is manually shut off. The light shuts off with the audio.Was this helpful? Thank you for your feedback!
-
After the wake-up process is finished, and the radio alarm has been turned off by pressing the alarm button, it is necessary to press the radio button to keep the radio playing.Was this helpful? Thank you for your feedback!
-
The owner's manual can be a bit difficult to understand. Here is what to do to program a preset station that has not already been saved in any preset: 1 Turn on the radio by clicking the FM button. 2 Find the station you want to save by doing what is shown under pt. 8 B or C, either clicking or pressing/holding for more than 2 seconds the left/right arrow buttons. 3 Press and hold the FM button for more than 2 seconds. Now the preset number appears blinking. 4 Click on the left/right arrow buttons to skip through the preset positions. 5 When you have located the desired memory preset position, such as Preset 4, confirm by clicking the FM button. Now the desired FM station is saved in memory preset 4. If you have already saved an FM station in a preset memory position, and want to have a new station placed there instead, here is what to do: 1 Turn on the radio by clicking the FM button. 2 Jump to the preset station you want to change with the round central button. Each click advances to the next preset. 3 When you are on the preset you want to change, e.g. preset 4, press and hold the FM button for more than 2 seconds. 4 The FM symbol and the frequency will now blink. 5 Before they stop blinking, click, or press and hold one of the arrow buttons to go through the FM frequencies step by step, or perform station search. 6 When you have found the new station you want to save in preset 4, click the round central button. 7 Now the new station is saved in preset 4.Was this helpful? Thank you for your feedback!
-
By pressing and holding the Bluetooth and the Volume PLUS buttons at the same time. The software version is shown in the display.Was this helpful? Thank you for your feedback!
-
The lights cannot be adjusted by user. The digital front panel display has automatic light intensity adjustment, which follows the level of light in the room.Was this helpful? Thank you for your feedback!
-
At the bottom of your Horizon alarm clock, you will see a little cap where the backup-battery resides. Turn the cover lid left to open it, and on the back of the cover lid, you will see the serial number.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00