JBL Charge 4

JBL Charge 4

Bærbar Bluetooth-højttaler

Sold from 2018 until now

Predecessor Product: JBL Charge 3
Successor Product: JBL Charge 5

Getting started with your JBL Charge 4

Getting started with your JBL Charge 4

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Udgangseffekt (W)
30
Frequency response
60Hz–20kHz
Signal-to-noise ratio
>80dB
Mål (cm)
22.1 x 9.4 x 9.4
Mål (inch)
8.7 x 3.7 x 3.7
Vægt (kg)
0.96
Vægt (lbs)
2.12
Bluetooth-profiler
A2DP V1.3, AVRCP V1.6
Bluetooth-frekvens
2.402 – 2.480GHz
Bluetooth sender-modulation
GFSK, π/4 DQPSK, 8DPSK
Bluetooth sender-effekt
0-20dBm
Bluetooth-version
4.2
Ladetid (timer)
4
Spilletid (timer)
20
3,5 mm lydindgang
Ja
Bluetooth
Ja
Charging cable
Ja
JBL Connect+
Ja
Powerbank
Ja
Vandtæt
Ja
Wireless
Ja
Genopladeligt batteri
Ja

Afspil og oplad uden grænser

Vi præsenterer JBL Charge 4, den bærbare Bluetooth-højttaler med kraftfuld fuldspektrumlyd og en indbygget strømbank, så du kan oplade dine enheder. Den er udstyret med en specialudviklet diskantenhed og to JBL-basenheder, der gør lyden intens med en stærk, dyb bas. Det genopladelige 7.500 mAh li-ion-batteri giver dig op til 20 timers spilletid. Højttaleren har en praktisk USB-port til hurtig opladning af dine enheder, f.eks. din smartphone, så du aldrig mere løber tør for strøm. Charge 4 har et slidstærkt design og et IPX7-klassificeret vandtæt kabinet, og den fås i mange forskellige farver. Med JBL Connect+ kan den have trådløs forbindelse til over 100 højttalere med JBL Connect+ og give dig en endnu større lydoplevelse.

Forbind op til to smartphones eller tablets til højttaleren, så I kan skiftes til at nyde den kraftfulde lyd.
Det indbyggede genopladelige 7.500 mAH li-ion-batteri understøtter op til 20 timers spilletid og kan oplade din enhed via USB-porten.
Tag Charge 4 med til stranden eller swimmingpoolen. Du behøver ikke bekymre dig over, om den bliver våd - eller endda falder i vandet.
Få en storslået lydoplevelse, og sæt gang i festen ved trådløst at forbinde mere end 100 højttalere, der understøtter JBL Connect+.
Med sit robuste stof og solide gummikabinet overlever højttaleren alle dine eventyr.
Dobbelte passive enheder giver en kraftig, iørefaldende JBL-lyd, som spiller højt og klart.

FAQs & How-Tos

17 results
  • If you are having trouble with distortion or drop outs, try the following suggestions:

    Move the audio source closer to the speakers

    Move the speakers closer to each other

    Make sure the streaming speaker (host) only connects to one audio source, disconnect the Bluetooth connection between the streaming speaker (host) and other audio source

    Make sure the audio source only connects with one streaming speaker (host), disconnect the Bluetooth connection between the audio source and other speakers

    Restart both your speakers and the audio source

    Make sure speakers are away from other sources of wireless signal – you could be experiencing interference

    Re-pair the audio source with your speaker

    If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speaker
  • Harman continuously strives to improve the performance of our speakers through software updates in the JBL Portable App. To optimize battery life and performance for your speaker, please perform a software update:
    First download the JBL Portable App from the App store or Google Play store to your mobile device.
    Then connect to the speaker by Bluetooth.
    Open the JBL Portable App and select settings to check and install the new Software version.
    The red dot indicates the presence of an update (see image below).
    FWUpdate.png
  • If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.
  • 1. In order to change the name of the speaker, you must first connect your speaker via Bluetooth and then download the JBL Connect app.
    2. Once the app is downloaded choose app and wait for it to recognize your device.
    3. Now that your speaker is highlighted, choose the gear located either below or to the right of the speaker image.
    4. Once you choose the gear you will have the option to edit the name by clicking on the small pencil icon.
    5. After you change the name, you will see a notification stating to "Reconnect to  Apply New Name"
    6. Go to your Bluetooth settings select "Forget This Device" and then reconnect to establish the new speaker name.
  • You will need to dry the charging port completely before plugging in power for charging.
     
  • If there are drop out or connection issues when using PartyBoost or Connect+, it could be one of three things.

    1.      Units are too far apart (move units closer together) 

    2.      Interference from other 2.4gHz wireless units in the area.

    3.     Unit is no longer working as designed

    Here are some steps to isolate the issue:

     Try taking the units out of the house and test it outside with no interference to see if you still experience connectivity issues. If you still experience connectivity issues, please try steps below:

    Whatever unit drops off, remove that from the chain. Test the rest of the speakers and keep doing it until you find the speaker that is causing the drop outs.  If all speakers begin to drop off, please try a different order and repeat. Repeat this process with each unit being the “main speaker”. 

     Make sure to turn off all WiFi/RF devices. (Router, laptop, baby monitor, Nest cams, IP cams, WiFi switches, WiFi outlets, WiFi lights, cordless phones, etc.) 

    You should be able to identify the issue/speaker by following these steps. 

  • This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.
  • In order to reset the Charge 4, with the unit on, press “Volume+” and “Bluetooth” at the same time for 3-4 seconds until you hear the audible chime.
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • There can be differences in the internal hardware that also implies different firmwares. These products feature the same specifications and performance expectations. If the app does not inform you of any new updates, the firmware is current and the product is performing as designed.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00