JBL Bar 5.1 Surround
Den imponerende JBL Bar 5.1 Surround leverer den ultimative oplevelse til hjemmebiografen. Væk alt hvad du ser til live med 550 Watt og en 10’’ subwoofer: den drivende bas i en actionfilm, spændingen i en thriller - eller naturens skønhed i en dokumentar. Indbygget Chromecast og Airplay 2 lader dig streame og styre onlineindhold, og Bluetooth gør, at den musik du streamer også lyder godt. Den fantastiske surroundlyd leveres af JBL's MultiBeam™ teknologi. JBL har givet kraft til verdens biografer i mere end 75 år. Nu kan du opleve kraften i dit eget hjem.
Product Specifications
General Specifications
| Model | Bar 5.1 CNTR (soundbar), BAR 5.1 SUB (subwoofer) |
|---|---|
| Strømforsyning | 100 - 240V AC, ~ 50/60Hz |
| Soundbars udgangseffekt (max. @THD 1 %) | 5 x 50W |
| Subwoofers udgangseffekt (Maks. @THD 1%) | 300W |
| standby-strøm | <0,5W |
| standby-strøm i netværk | <2,0W |
| Driftstemperatur | 0 °C - 45 °C |
| BAR 5.1 SURROUND er i overensstemmelse med Europa-Kommissionens forordning (EF) nr. 1275/2008 og (EU) nr. 801/2013. | |
| Slukket-tilstand | Ikke relevant |
| Netværksstandby | <2,0W |
| Tid til standby | <20minutter |
| * Standby | Hvis alle soundbarens trådløse forbindelser deaktiveres, og hvis der ikke leveres lyd- eller videosignal til soundbar-enheden, vil den automatisk sættes på standby efter 10 minutter. |
| * Netværksstandby | Hvis nogle af soundbarens trådløse forbindelser aktiveres, men der ikke leveres lyd- eller videosignal til soundbar-enheden, vil den automatisk sættes på netværksstandby efter 10 minutter. |
| Enhver genaktivering af lyd- eller videosignalet vil bringe enheden fra standby til driftstilstand. |
Audio Specifications
| Samlet højttalerudgang (max. @THD 1 %) | 550W |
|---|---|
| Maks. SPL | 103 dB |
| Frekvensområde | 40 Hz – 20 KHz |
| Lydindgange | 1 optisk, Bluetooth, USB (USB-afspilning understøttes i den amerikanske version. For andre versioner er USB kun til service.) |
| MP3 Codec | MPEG 1 lag 2/3, MPEG 2 lag 3, MPEG 2,5 lag 3 |
| MP3 samplingrate | 16KHz – 48 KHz |
| MP3 bitrate | 80 kbps – 320 kbps |
Dimension Specifications
| Soundbar-enheder | 5 x 4.690” racetrack-enheder + 2 x 1,25” diskanter på siden |
|---|---|
| Subwoofer-enhed | 10” |
| Mål (B x H x D) | 1.018 x 58 x 100mm / 40” x 2.28” x 3.94” (Soundbar); 305 x 440 x 305mm / 12” x 17,3” x 12” (Subwoofer) |
| Vægt | 2,85KG (Soundbar); 10,62Kg (Subwoofer) |
Control Connect Specifications
| USB-port | Type A |
|---|---|
| USB-rating | 5V DC, 0,5A |
| Understøttede filformater | mp3, wav |
| Bluetooth-version | 4.2 |
| Bluetooth-profil | A2DP V1.3, AVRCP V1.5 |
| Bluetooth-frekvensområde | 2.402MHz – 2.480MHz |
| Bluetooth maks. sendekapacitet | <11dBm (EIRP) |
| Modulationstype | GFSK, π/4 DQPSK, 8DPSK |
| Wi-fi-netværk | IEEE 802.11 a/b/g/n/ac (2,4GHz/5GHz) |
| 2,4G wi-fi-frekvensområde | 2.412-2.472MHz (2,4 GHz ISM-bånd, USA 11 kanaler, Europa og andre steder 13 kanaler) |
| 2,4G maks. Wi-fi sendekapacitet | <20dBm |
| Modulationstype | DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM |
| 5G wi-fi-frekvensområde | 5,15 - 5,35GHz, 5,725 - 5,825GHz |
| 5G maks. wi-fi-sendekapacitet | <22dBm |
| Modulationstype | QPSK, BPSK, 16QAM, 64QAM, 256QAM |
| 5 G trådløs frekvensområde | 5.161,35 - 5.245,35MHz, 5.736,35 - 5.820,35MHz |
| 5G maks. sendekapacitet | <9dBm (EIRP) |
| Modulationstype | π/4 DQPSK |
Documents & Downloads
Other
-
Konformitetserklæring (EU)
-
Konformitetserklæring (EU)
-
Lynvejledning (flersproget)
-
Lynvejledning (flersproget)
-
JBL Global Warranty Card
-
Firmware update for JBL Bar 5.1 Surround Global version
-
Firmware update for JBL Bar 5.1 Surround EMEA version
-
Firmware update for JBL Bar 5.1 Surround China version
-
Betjeningsvejledning (Dansk)
-
Betjeningsvejledning (Dansk)
-
Datablad (Dansk)
Videos
FAQs & How-Tos
-
When using the Device Utility app to set up my speaker, my Wi-Fi network is not appearing in the list. How can I connect to my Wi-Fi network?
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
-
What is the distance between wall-mounts on JBL BAR soundbars
The distance between wall-mounts centers are: JBL BAR Studio: 45 cm. JBL BAR 2.1: 70 cm. JBL BAR 3.1: 70 cm. JBL BAR 5.1: 61 cm JBL BAR 5.1 Surround: 71.85 cm JBL BAR 9.1: 55,5 cm
Was this helpful? Thank you for your feedback!
-
How To Manual Update Software: BAR 5.1 Surround
- Press and hold the [VOL- ] and [SOURCE] buttons simultaneously. The software version will scroll across the front display.
- If a newer software version is available, download it from the JBL website.
- Copy the two files to the Root directory of an empty USB thumb drive.
- Update.zip
- Checksum.txt
- On the bar, press and hold the [POWER] and [SOURCE] buttons for more than 10 seconds. This will reset the BAR 5.1 Surround.
- Insert the USB thumb drive into the USB port on the rear panel of the bar.
- On the bar, press and hold the [POWER] and [VOL-] buttons for more than 10 seconds to begin the software update process.
- "UPDATING" will appear on the front display of the bar.
- Wait for the software update to complete. The unit will reboot and go back to standby.
- Turn unit on.
- Press and hold the [VOL- ] and [SOURCE] buttons simultaneously. The new software version will scroll across the front display.
Was this helpful? Thank you for your feedback!
-
BAR 5.1 SURROUND EMEA VERSION: Software Update Release Notes
BAR 5.1 SURROUND
Software Update Release Notes
------------------------------------------------------------------------
Version: 20-43-51-00
Release Date: December 18, 2020- Improves Soundbar HDMI ARC compatibility with TV
Was this helpful? Thank you for your feedback!
-
When trying to set up my speaker with the Google Home app, I get a message that says “Device needs to be activated before setup”. How do I proceed?
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback!
-
How To Check Software Version
To find out the software version, press and hold the [VOL- ] and [SOURCE] buttons simultaneously. The software version will scroll across the front display.
Was this helpful? Thank you for your feedback!
-
How to restore factory default settings on your device
With our JBL BAR 5.1 Surround there is two types of resets, one is to reset the WiFi settings and last one is to restore factory default settings.
Let us walk through each one of them.
Resetting WiFi settings- Turn on your JBL BAR 5.1 Surround.
- Press and hold POWER button down for more than 10 seconds.
- All of your WiFi configuration is lost and you need to reinstall it again.
Resetting to Factory default settings- Turn on your JBL BAR 5.1 Surround
- Press and hold POWER and SOURCE button for 3 seconds.
- Your device is now reset.
Was this helpful? Thank you for your feedback!
-
How to connect to your WiFi network
You can enjoy streaming your favorite music over WiFi to your JBL BAR 5.1 Surround by adding it to your network.
Connecting to WiFi- Turn on your soundbar.
- Download the Google Home app to your phone.
- Available on Android and Apple.
- Enable Bluetooth, Location services on your Android device.
- Enable Bluetooth on your Apple device.
- Open Google Home app
- Follow the instructions given in the app.
Was this helpful? Thank you for your feedback!
-
I have connected my speaker using the Device Utility app, but the Google Home app cannot find the speaker. What should I do?
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback!
-
How To Use Alexa MRM (Multi-Room Music) on Wi-Fi
- On an Android or iOS device, add the Soundbar to your home WiFi network through the JBL BAR Setup App.
- Follow the App instructions to complete setup.
- Sign in with your Amazon Alexa account. If you do not have, create one.
- With the Alexa MRM multi-room music playback, you can stream music on your Android or iOS devices to multiple Amazon Alexa speakers.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-17.00
Saturday - Sunday: 10:00-16:00