JBL Wave Flex

JBL Wave Flex

Totalt trådløse øretelefoner

Getting started with your JBL Wave Flex

Getting started with your JBL Wave Flex

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Enheds-størrelser (mm)
Number of Microphones
Enheds-følsomhed ved 1kHz/1mW (dB)
Dynamisk frekvensområde (Hz)
20 Hz – 20 kHz
Impedans (ohm)
Vægt (g)
Charging Case Weight (oz)
Vægt (g)
Earpiece Weight (oz)
A2DP V1.3, AVRCP V1.6, HFP V1.7
2.4 GHz - 2.4835 GHz
Bluetooth sender-modulation
Bluetooth sender-effekt
<13 dBm
Ladetid (timer fra helt afladet)
Maksimal spilletid (timer)
Charging cable
Lader lyd fra omgivelserne passere
Indbygget mikrofon
Smart opladningsetui
Håndfri opkald
Genopladeligt batteri
Lynopladning (5 min. = 1 t spilletid)
Multifunktionel TalkThru-knap
Ægte trådløse
Vand resistent

Dyb bas, højt humør

Tag din lyd med overalt. Med en bas, du kan mærke, op til 32 timers samlet batterilevetid fra et sikkert, komfortabelt åbent design, er de stænk- og støvafvisende JBL Wave Flex designet til din daglige underholdning. Uanset om du udforsker byens gader eller slapper af på stranden, vil dine håndfri stereoopkald altid være krystalklare, mens Smart Ambient-teknologien holder dig opmærksom på dine omgivelser. Og når du får brug for et ekstra boost, kan du hurtig-oplade to timers ekstra strøm på bare 10 minutter.

Få mest muligt ud af dine mix med lyd i høj kvalitet fra sikre, pålidelige øretelefoner med 12 mm enheder med JBL Deep Bass-lyd.
JBL Wave Flex har et ergonomisk og åbent design, så du let glemmer, du har dem på. Det åbne design giver dig mulighed for at nyde al lyden uden at blokere din ørekanal.
Med 8 timers batteritid i øretelefonerne og 24 i etuiet leverer JBL Wave Flex lyd hele dagen. Og når du har brug for mere strøm, kan du hurtig-oplade to ekstra timer på kun 10 minutter.
Tag rundt overalt, og hør det hele med Smart Ambient-teknologien. Når du har brug for en hurtig snak, kan du med TalkThru straks høre dig selv og dem omkring dig - uden at tage dine øretelefoner ud. Eller brug Ambient Aware til at holde musikken kørende, mens du forbliver opmærksom på dine omgivelser.
Når du foretager håndfri stereoopkald på farten, kan du med VoiceAware afbalancere, hvor meget af din egen stemme du hører, mens du taler med andre.
Fra stranden til cykelstien - de IP54-certificerede øretelefoner og det IPX2-certificerede opladningsetuiet er vand- og støvafvisende til oplevelser hele dagen.
Lyt hele dagen — på din måde. Tilpas din foretrukne lyd med den dedikerede app, og gør JBL Wave Flex til din perfekte lydledsager.

FAQs & How-Tos

4 results
  • As with all in-ear headphones, our range of True Wireless Stereo headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing. Remember to clean the charging points on the headphones and inside the charging case.

    If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). This should remove the wax and resolve the volume/balance issues.

  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • This headphone is supported by the My JBL Headphones App.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00


WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00