How To
How To
-
The top panel LEDs are flashing because the OTA firmware update is in progress, the product should work after the upgrade is completed. It may have been caused by a previous interruption to an update.
It should be possible to resolve the issue by doing the following:
- Plug in the power cable and wait for at least 5 minutes for the Partybox Ultimate to complete the update.
- If the Partybox Ultimate stops flashing, but cannot power on, then perform a factory reset by pressing the two buttons below for more than 10 seconds: Moment (heart symbol) and Play (or through the JBL One app). After this has been done, press the Power button.
Was this helpful? Thank you for your feedback! -
As with all in-ear headphones, our range of True Wireless Stereo headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing. Remember to clean the charging points on the headphones and inside the charging case.
If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). This should remove the wax and resolve the volume/balance issues.
Was this helpful? Thank you for your feedback! -
The Facts about your data and how Google uses them.
To improve their services:
Google uses the data to make their services faster, smarter, and more useful to you, such as providing better search results and timely traffic updates.
Data allows Google Assistant and their services to be more efficient and faster.
Google Assistant learns over time to provide better and more personalized feedback.
Yes, Google services are protected by one of the world’s most advanced security infrastructures. Conversations within your LINK BAR is encrypted by default.
Your Search history:
Your search history on the LINK BAR will appear in your Google account's search history. Also, if you give the LINK BAR permission, it may access your data saved in other Google services such as Calendar and Gmail to answer questions you ask.
Conversations and questions:
Any conversation or search history is stored in the cloud via your Google account and saved until you choose to delete it in the Google Home app. The LINK BAR does not keep or store any data locally.
We hope that your concern about the Privacy data is answered.Was this helpful? Thank you for your feedback! -
The LINK BAR is always ON, and you can ask the LINK BAR questions whether your TV is ON or OFF.
You can easily play music as well, there are no limits!Was this helpful? Thank you for your feedback! -
XTREME 3
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V0.2.1.6
Version (iOS): V5.6.6
Version (Android): V5.6.6
Release Date: August 2, 2022
Release Media: OTA (over the air) via JBL Portable App
What’s New- Fixed audio drop with iOS 15.1 or later in PartyBoost mode
- Fixed the PartyBoost connection issue
- Other bug fixes and performance improvements
Was this helpful? Thank you for your feedback! -
All JBL Quantum headset models work only through 3.5mm audio jack (aux) connected to the Xbox controller. You cannot connect to any Xbox Series console via Bluetooth.
Please note: JBL QuantumENGINE is only available on PC.
Was this helpful? Thank you for your feedback! -
The JBL Wireless Microphone set allows 2 x wireless microphones* to be connected to any PartyBox model ** through the use of a dongle connected to the Mic input. Additionally, a 3rd wired microphone - like the JBL PBM100 Wired Microphone, can also be connected to the switchable Guitar/Mic 2 input (only available on some PartyBox models). This will also work when using the non-switchable Guitar input on other Partybox models - however, this will bypass the karaoke effects including echo for the connected microphone and would generally have a slightly different sound character/timbre to a microphone connected to the Microphone input.
*This includes the PartyBox On-The-Go, a maximum of 2 wireless microphones can be connected and used simultaneously. The standard bundled PartyBox On-The-Go microphone can only be connected to the PartyBox On-The-Go that it came bundled with, it also cannot connect wirelessly to any other PartyBox models or portable speakers other than the PartyBox On-The-Go that it came bundled with. Only one standard, bundled PartyBox On-The-Go wireless microphone can be connected at a time, unless the JBL Wireless Microphone is purchased (sold separately), a spare part will only work as a replacement, not simultaneously.PartyBox Model Mic Arrangement Ports Used MAX ** Encore 1 Wireless (pre-paired, included) OR 2 Wireless (sold separately, second microphone needs to be manually paired as described in Owner's Manual) N/A - Wireless (pre-paired, no Wired Microphone port) 2 100/110/Encore Essential 1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port 2 200 1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port 2 300 1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port 2 120/310/310 MC*/320/710/Ultimate 1 Wired AND 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port AND Mic/Guitar Port 3 1000 1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately) Mic Port 2 On-The-Go/On-The-Go Essential 1 Wired AND 1 Wireless (pre-paired, included)
OR
2 Wireless (Wireless Microphone Set must be used, sold separately)Mic Port AND N/A - Wireless (pre-paired)
OR
Mic Port (pre-paired microphone will not work simultaneously when dongle used)2
OR
2* Partybox 310 MC - is a standard Partybox 310, which comes bundled with 1 x Wired Microphone (PBM100).
Was this helpful? Thank you for your feedback! -
No, it will not change the TruNote autocalibration results. TruNote equalizes the acoustics of the headphones to the specific fit to your head As is the case with any supplemental equalization setting, it will change how the audio sounds to the userWas this helpful? Thank you for your feedback!
-
There is no plan for adding JBL Connect support for Playlist speaker. But you can group any speaker together that support Chromecast built-in for multi-room experience.Was this helpful? Thank you for your feedback!
-
When connected to a device using the Wireless USB (A or C) dongle the head tracking feature (JBL QuantumSPATIAL 360) will work. To enable JBL Quantum 360SPHERE and spatial calibration the JBL Quantum Engine is required.
Was this helpful? Thank you for your feedback! -
The head tracking will only work when connected via the wireless USB (A or C) dongle. The reason for this is that the head tracking technology uses a lot of processing power and a low latency connection.
Was this helpful? Thank you for your feedback! -
Yes, if no audio is present and no buttons are pressed, DUET will go into standby after approx. 10 minutes.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
