How To
How To
1096 results
-
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback! -
The USB port is only for charging the JBL Quantum 350 Wireless.
Connect the dongle to use the 2.4GHz wireless connection.Was this helpful? Thank you for your feedback! -
JBL is committed to providing the most optimal consumer experience through superior immersive audio. Our Quantum 800/600 headsets are designed to be connected via 2.4Ghz, BT ( 800 only ) or 3.5mm jack. USB-C port is only designed for charging the internal 14hr battery and does not provide an audio connection. This is an intentional design decision.
Was this helpful? Thank you for your feedback! -
Unfortunately, our JBL Quantum DUO speakers are not supported by our QuantumENGINE PC software.
All configuration is done on the speakers itself, and there is no need or required software to change the RGB lights.Was this helpful? Thank you for your feedback! -
With this product, you can easily set up both Amazon Alexa and Google Assistant. Just follow the simple set-up process in the JBL One app, using your Amazon and Google accounts. This will give you the convenience of having both voice assistants available to you at the same time. The LED on the front of the speaker will light up blue when Alexa responds and white when Google Assistant responds.
Was this helpful? Thank you for your feedback! -
Please avoid the use of USB splitters and extenders built into screens etc. Dropouts in sound and lack of signal from the microphone in headsets may be the result. If possible, always connect directly to the computer, or use a single extension cord.Was this helpful? Thank you for your feedback!
-
The USB charging port allows you to charge external devices.
• When playing music on the Go + Play 3, the USB Charge out is 5V / 0.5A
• When no music is playing on the Go + Play 3, the USB Charge out is 5V / 2.1A
Was this helpful? Thank you for your feedback! -
Software updates for your speaker can be done using the JBL Portable app.
Download it from the Apple App store and Google Play store.
If there is an available update, look for the small red dot above the gear icon and follow the download instructions (see image below).
If you have an issue with your device it is always worth checking if there is a Software update available and performing the installation if there is.Was this helpful? Thank you for your feedback! -
Press and hold the power button for 3-5 seconds, it will power on/off the TRIP. Short press on the power button will lock and unlock top capacities touch buttons on the TRIP. Be sure to hold the button for 3-5 seconds to ensure you are powering on/off and not controlling the touch buttons.Was this helpful? Thank you for your feedback!
-
Talk Thru technology allows you to clearly hear others for quick conversations without removing your UA Train headphones. To activate TalkThru mode, press the UA logo on the RIGHT ear for 1 second. You will hear your music level lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the UA logo again. (Please note TalkThru does not function when using cable connection.)Was this helpful? Thank you for your feedback!
-
Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.Was this helpful? Thank you for your feedback!
-
To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.Was this helpful? Thank you for your feedback!
-
To receive a call, press the center button located in between the volume- and volume+ button for 1 second.Was this helpful? Thank you for your feedback!
-
The device is charged by a standard micro USB charger. To charge the unit, gently pull out the rubber cover just below the light indicator on the left side of the inline mic. You will see the the charging cable end.Was this helpful? Thank you for your feedback!
-
To skip the track forward, press and hold the volume up button. (+) If you want to skip backward, press and hold the volume down (-) The volume buttons are located on the RIGHT arm of the neckband.Was this helpful? Thank you for your feedback!
-
Press and hold the circle power button for 3-5 seconds. This will be located on the LEFT arm of the neckband. We recommend having one or both ear tips in your ear to listen to the audio commands. Continue to press and hold until you hear the audible voice stating, “powering on.” If this is your first time powering on the headphones it will automatically go into pairing mode in which you will hear the audio voice prompt stating “looking for device”. Make sure that the device you are attempting to connect to is in the Bluetooth search mode and within range. UA | JBL Flex should appear on your device within 3-8 seconds. Once you choose this option on your discoverable devices, it will connect and the voice prompt will state “Connected. “ To power off the headphones, press and hold the circle power button for 2-3 seconds or until you hear the audible voice state, “Powering Off”Was this helpful? Thank you for your feedback!
-
The headphones feature a Speed Charge battery which allows you to receive a full hour of playback time after only charging the headphones for 5 minutes. To receive the full 12 hours of audio playback, it typically takes 1.5 hours of charging time.Was this helpful? Thank you for your feedback!
-
Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.Was this helpful? Thank you for your feedback!
-
You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.Was this helpful? Thank you for your feedback!
-
TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA React headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
Locate the power button on the controller. Hold the power button up for 2-3 seconds and release. Once turned on, it will display a solid blue light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue and red light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
The UA React headphones comes with 3 different ear tips and enhancers to ensure the best fit!Was this helpful? Thank you for your feedback!
-
As the headphones are charging, you will see a red solid light indicator on the controller. Once the unit is fully charged, the red light will turn off.Was this helpful? Thank you for your feedback!
-
To receive a call, press the power/pairing button on the controller for 1 second.Was this helpful? Thank you for your feedback!
-
The UA React headphones do not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
AmbientAware Technology allows you to hear your surroundings without removing your UA React headphones. To activate AmbientAware mode, double press the Bionic Hearing button on the controller. You will hear a tone, and your music level will lower when AmbientAware Technology is engaged. To revert back to normal volume, simply double press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.Was this helpful? Thank you for your feedback!
-
You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.Was this helpful? Thank you for your feedback!
-
To skip tracks forward, press and hold the volume + for 2 seconds. To skip tracks backward, press and hold the volume - for 2 seconds. To pause/play the track, press the center button for 2 seconds.Was this helpful? Thank you for your feedback!
-
TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA Pivot headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
Locate the power button on the controller. Hold the power button up for 2-3 seconds and release. Once turned on, it will display a solid blue light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue and red light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
From a full charge, you can expect up to 9 hours of playback time.Was this helpful? Thank you for your feedback!
-
The UA Pivot headphones comes with 3 different ear tips and enhancers to ensure the best fit!Was this helpful? Thank you for your feedback!
-
As the headphones are charging, you will see a red solid light indicator on the controller. Once the unit is fully charged, the red light will turn off.Was this helpful? Thank you for your feedback!
-
To receive a call, press the power/pairing button on the controller for 1 second.Was this helpful? Thank you for your feedback!
-
The UA Pivot headphones do not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
AmbientAware Technology allows you to hear your surroundings without removing your UA Pivot headphones. To activate AmbientAware mode, double press the Bionic Hearing button on the controller. You will hear a tone, and your music level will lower when AmbientAware Technology is engaged. To revert back to normal volume, simply double press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
To activate Voice Assistant, press and hold the LEFT ear for 5 seconds until music stops and voice assistance asks what they can help you withWas this helpful? Thank you for your feedback!
-
To reset, Long press the (Right) button for 2s when the earbuds in the case, the blue LED will flash once to indicate reset is done.Was this helpful? Thank you for your feedback!
-
To power on and pair the UA Flash, remove the ear tips from the charging case. If this is your first time using the headphones, they will automatically go into pairing mode. You will see the blue and red LED light flash on the RIGHT ear as it attempts to pair with your device. Make sure your device is in range and BT settings are ON. The JBL True Wireless Flash should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a slow blinking blue light below the UA logo on the RIGHT Ear. The RIGHT ear must be connected first in order to power on and connect the LEFT ear. To connect the LEFT ear, simply press and hold on the UA logo for 3-5 seconds until you hear the audible power on chime. (The left should automatically power on when you remove it from the case) Once powered on, it should connect to your device within a few seconds displaying a slow blinking blue LED light below the UA logo.Was this helpful? Thank you for your feedback!
-
To turn off the UA Flash, you may place headphones in case to automatically power off or press and hold the center of the UA logo on the RIGHT ear for 3-5 seconds until you hear the power down chime. Both RIGHT and LEFT ear will display a solid red light before turning completely off. Please note: Powering off the RIGHT ear, will also power off the LEFT ear as well.Was this helpful? Thank you for your feedback!
-
To connect to a new device, begin with the headphones powered off and hold the center button on the RIGHT headphone for 5 seconds to enter pairing mode. You will hear the BT pairing audible chime as it searches for a different device. Make sure the device you are wanting to connect to is in range and BT is on. Once connected you will hear the audible Connected chime. Once Right ear is connected, press and hold the center button on LEFT ear for 3 seconds as it powers on and connects to the device followed by the same Connected audible chime.Was this helpful? Thank you for your feedback!
-
To pause/play music, press center button on RIGHT ear for 1 second. To skip tracks forward, DOUBLE CLICK the center button on RIGHT ear. Unfortunately, you cannot skip tracks backward.Was this helpful? Thank you for your feedback!
-
To charge the UA Flash, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly: 0= 0% Dead 2-3 = 40%-50% 4=100% Full battery lifeWas this helpful? Thank you for your feedback!
-
To take a phone call, press the center button of the RIGHT ear for 1 second. To hang up a call, press and hold the center button on the RIGHT ear for 1 second. To ignore a call, press and hold center button for 3 seconds until music resumes.Was this helpful? Thank you for your feedback!
-
The UA Flash does not support AptX or AAC audio codecsWas this helpful? Thank you for your feedback!
-
To activate Ambient Aware DOUBLE CLICK the center button located on the LEFT ear. You should hear the music level drop. To resume to normal music level, DOUBLE CLICK the center button on LEFT ear again.Was this helpful? Thank you for your feedback!
-
You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.Was this helpful? Thank you for your feedback!
-
The two earpieces of your TWS headphones should normally be connected together without issue. However, if they are no longer paired to each other, please follow these steps, in order.
- Forget/unpair the headphones on your device.
- Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
- Pair the headphones to your device and see if this resolves the problem.
- If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
- Initiate a Product Reset to reset the earbud’s Bluetooth connection.
- Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
- Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
- Manually pair the 2 buds together again, as you did in step 2. This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
- Pair the buds to your Source Device.
Was this helpful? Thank you for your feedback! -
There is a rare issue causing some DAB radio stations not to be found after performing a scan.
If you are experiencing this, a firmware update has been released to fix the issue.
First, please read through the update instructions thoroughly, then proceed with installing the update.
Please click the link below to download the update:
JBL TUNER XLWas this helpful? Thank you for your feedback! -
There is a rare issue causing some DAB radio stations not to be found after performing a scan.
If you are experiencing this, a firmware update has been released to fix the issue.
First, please read through the update instructions thoroughly, then proceed with installing the update.
Please click the link below to download the update:
JBL TUNER 2
If you have any questions regarding the update or installation, please do not hesitate to contact us.
Was this helpful? Thank you for your feedback! -
Different ear tip types provide a different sound performance, depending on their shape. For a high-quality sound output, JBL specially tuned the sound according to different tips to fit your wearing preference.
o The Open Ear Tips mode allows more natural, while letting the surrounding noises come through.
o The Sealing Ear Tips provides more isolation from the surroundings.Was this helpful? Thank you for your feedback! -
JBL Tune Flex is packed with two types of ear tips. These are called “Open Ear Tips” and “Sealing Ear Tips”.
We recommend using the “Sealing Ear Tips” for extra isolation, secure fit and stability.
Ear tips in three sizes are included in the box. You can choose the size that best suits your preference and your ear configuration.Was this helpful? Thank you for your feedback! -
Due to the various human ear canal, there are different needs of each user for ANC. When you change ear tips, we suggest you reselect different modes of ANC Tuning to enjoy the best ANC experience. Each ANC Tuning represents different ANC presets, that way you can find the one that best fits your taste.Was this helpful? Thank you for your feedback!
-
JBL Tune Flex is packed with two types of ear tips. These are called “Open Ear Tips” and “Sealing Ear Tips”.
“Open Ear Tips” allow you to be aware of your surroundings while using the earbuds. “Sealing Ear Tips” provide you with greater sound isolation and a more secure fit.Was this helpful? Thank you for your feedback! -
If you do not perform the "Ear Tip Sound" setting after changing the ear tips, i.e., using the “Open Ear Tips” for “Sealing Ear Tip” mode, the sound will not be as natural as with “Sealing Ear Tips”, and vice versa.Was this helpful? Thank you for your feedback!
-
TUNE FLEX
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V3.1.0 (global)
Release Date: September 14, 2022
Release Media: OTA (over the air) via JBL Headphone App
What’s New- Improved the connectivity between left and right earbud.
- ANC (active noise cancelling) can be activated more quickly.
- Optimized the APP user experience for better flow.
Was this helpful? Thank you for your feedback! -
You can choose the “Ear Tip Sound Settings” feature in the JBL Headphones app or activate this feature by tapping three times + holding the left earbud.Was this helpful? Thank you for your feedback!
-
Numbers 1-6 do NOT relate to ANC level, but you can find the optimal performance for your ears by selecting one of the bubbles.Was this helpful? Thank you for your feedback!
-
JBL Tune Flex is packed with two types of ear tips. These are called “Open Ear Tips” and “Sealing Ear Tips”.
When you click the Ear Tips mode, you will hear a tone to remind you of the different sound modes (Voice prompts not ready yet).Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
