JBL Tune 760NC - Blush - Wireless Over-Ear NC Headphones - Hero JBL Tune 760NC - Blush - Wireless Over-Ear NC Headphones - Front JBL Tune 760NC - Blush - Wireless Over-Ear NC Headphones - Detailshot 1
JBL Tune 760NC - Blush - Wireless Over-Ear NC Headphones - Hero
  • JBL Tune 760NC - Blush - Wireless Over-Ear NC Headphones - Swatch Image
  • JBL Tune 760NC - Black - Wireless Over-Ear NC Headphones - Swatch Image
  • JBL Tune 760NC - White - Wireless Over-Ear NC Headphones - Swatch Image
  • JBL Tune 760NC - Blue - Wireless Over-Ear NC Headphones - Swatch Image

JBL Tune 760NC

Din musik. Intet andet betyder noget. JBL Tune 760NC leverer varen: Omsluttende, super-behagelige og kraftfulde. Den aktive støjreduktion blokerer unødvendige forstyrrelser, så du kan fokusere på det, der betyder noget - i op til 35 timer. Er det ikke nok? Få 2 ekstra timers spilletid med blot 5 minutters opladning. Tune 760NC er lette og foldbare, så de passer til ethvert eventyr. Du kan forbinde to Bluetooth®-enheder samtidigt, så du aldrig går glip af et opkald på din telefon, mens du ser en video på din tablet. JBL Tune 760NC parres straks med din Android-enhed med et enkelt tryk. Samtidig får du håndfri håndtering af opkald og din stemmeassistent. For at forlænge afspilningen i det uendelige skal du blot tilslutte JBL Tune 760NC med det medfølgende aftagelige kabel. Vælg den farve, der matcher dit humør, og slå dig løs!

Product Specifications

General Specifications

Enheds-størrelser (mm) 40
Number of Microphones 2

Audio Specifications

Enheds-følsomhed ved 1kHz/1mW (dB) ["103 dB SPL/1 mW (passive)", "95 dB SPL/1 mW (active)"]
Dynamisk frekvensområde (Hz) 20 Hz - 20 kHz
Impedans (ohm) 32

Dimension Specifications

Vægt (g) 220
Vægt (oz) 7.8
Hovedtelefonernes kabel-længde (m) 0.2
Headphone Cable Length (ft) 0.7
Ear Cup External Height (in) 3.6
Ear Cup External Width (in) 3
Ear Cup Internal Height (in) 2.1
Ear Cup Internal Width (in) 1.5
Ear Cup Depth (in) 0.8
Højde (cm) 9.2
Bredde (cm) 7.6
Indre bredde (cm) 5.4
Indre højde (cm) 3.7
Dybde (cm) 2

Control Connect Specifications

Bluetooth-version 5.0
Bluetooth-profiler A2DP 1.3, AVRCP 1.5, HFP 1.6
Bluetooth-frekvens 2.4 GHz - 2.4835 GHz
Bluetooth sender-modulation GFSK, π/4 DQPSK , 8DPSK
Bluetooth sender-effekt < 10 dBm
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • 1 x JBL Tune 760NC
  • 1 x type-C USB-opladningskabel
  • 1 x aftageligt lydkabel
  • 1 x garanti/advarselsark
  • 1 x sikkerhedsdatablad
  • 1 x startguide
JBL Tune 760NC - What's in the Box

FAQs & How-Tos

Can my headphones be connected to two devices simultaneously?
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
Voice Assistant Headphone Connection
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

Pairing issues with a Smartphone or Tablet
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.

Headphone Support Guide

Need help to resolve some the most common headphone challenges?

Learn more

Bluetooth Guide

Har du brug for hjælp til Bluetooth parring? Denne guide kan hjælpe dig

Lær mere

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00