Synchros E40BT
Bluetooth on-ear hovedtelefon, der omfatter JBL signaturlyd, PureBass-ydelse og trådløs forbindelse med musikdelingsfunktion
Sold from 2014 until now
Getting started with your Synchros E40BT
Quick Start Guide & Downloads
Product Specifications
- Bluetooth
- Bluetooth Transmitter Power
- less than 4dBm
- Rated Power Input
- 30mW
- Frequency Response
- 20Hz – 22kHz
- Input Impedance
- 32 ohms
- Maximum SPL
- 114dB @ 30mW
- Microphone Sensitivity
- -42dBV/Pa @ 1kHz
- Driver
- 40mm
On-ear stereo headphones featuring Bluetooth® connectivity with ShareMe music sharing.
Næste generations on-ear stereohovedtelefon, der omfatter JBL’s legendariske lyd, Bluetooth®-forbindelse, ShareMe musikdeling og mobilvenlige funktioner, alt sammen i et elegant og nutidigt design. Den nye E40BT tager JBL's legendariske signaturlyd, tilføjer avancerede Bluetooth- og mobile funktioner, som alt sammen kommer i et elegant design, der er både komfortabelt og iøjnefaldende. JBL’s teknikere har kombineret store 40 mm dynamiske enheder med PureBass-ydelse, hvormed dine ører forkæles med et ekspansivt frekvensrespons med fuld bas uden forvrængning. Bluetooth-teknologi muliggør trådløs forbindelse med telefoner, tablets og musikafspillere, mens det giver dig adgang til en krystalklar forbindelse til dine mobiltelefoner ved hjælp af en enkelt knap og Pure Konnexx ekkoannulleringsteknologi. Indbygget ShareMeTM-teknologi lader dig streame musik trådløst til en anden ShareMe-udstyret hovedtelefon. Et indbygget genopladeligt Li-ion-batteri giver dig 16 timers afspilning, og når batteriet er fladt, kan du bruge det medfølgende aux-kabel til fortsat, uafbrudt lytning. Ud over fantastisk lyd er E40BT er designet til komfort, stil og holdbarhed. Den ergonomiske hovedbøjle og det 360-graders drejehængsel muliggør en individuel pasform og vedvarende komfort. De super bløde ørekopper af kunstlæder omgiver dine ører for komfort hele dagen og gør deres til at holde distraherende, omgivende lyd ude. E40BT’s elegante design og fire unikke farvekombinationer kommer med et visuelt udtryk, der er lige så slående som dens lyd.
FAQs & How-Tos
-
For models E40BT and E50BT Connect the first headphone by BT to your mobile device Tap the ShareMe button once Tap the ShareMe button on the 2nd headphones twice ( ! ) The headphones will connect to each other. When changing volume on source device, or BT connected headphones, the volume will only change on THAT headphone ( and in some cases the source device, like iOS devices and newer Android ), not on the one connected via ShareMe. When changing volume on a via-ShareMe-connected headphone ( 2nd ), it will not change volume on source device, or on the BT-connected headphone. To sum up, both headphones have their individual volumes. For Everest models ( not ELITE ). Connect the headphones by BT to your mobile device Put the 2nd device ( speaker, headphones as long as they have Bluetooth ) in "BT discovery mode" Press the ShareMe button on the Everest headphone ( button marked with a little "s" ) The Everest will connect to BT device. (Please note that you may not be able to pair from the Everest to the Everest Elite models, or if you can pair, you may have dropouts in sound). When changing volume on source device, or Everest, the volume will only change on the Everest ( and in some cases the source device, like iOS devices and newer Android ), not on the device connected via ShareMe. When changing volume on via-ShareMe-connected BT device ( 2nd ), it will not change volume on source device or Everest. Please note that it is NOT possible to use ShareMe if you are listening to analog signal via cable. Bot the E-series and the Everest models will switch off the Bluetooth circuits as soon as you insert the audio cable, so re-transmission is not possible.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00