JBL Jr310BT
De trådløse JBL Jr310BT hovedtelefoner er sikre, lette og børnevenlige. De leverer op til 30 timers legendarisk JBL-lyd og festlig stil til de yngste musikfans. Hovedtelefonerne er designet til aldrig at overstige 85 dB for at beskytte hørelsen, og de børnevenlige knapper er nemme at betjene. Børnene får en komfortabel lytteoplevelse takket være den ekstra blødt polstrede hovedbøjle og de bløde, velsiddende ørepuder. Alle hovedtelefoner er forskellige, da JBL Jr310BT kan tilpasses med de medfølgende genanvendelige klistermærker, som gør dem endnu sjovere!
Product Specifications
General Specifications
| Enheds-størrelser (mm) | 32 |
|---|---|
| Number of Microphones | 1 |
Audio Specifications
| Enheds-følsomhed ved 1kHz/1mW (dB) | 90 |
|---|---|
| Dynamisk frekvensområde (Hz) | 20Hz – 20kHz |
| Impedans (ohm) | 32 |
Dimension Specifications
| Vægt (g) | 115 |
|---|---|
| Vægt (oz) | 3.88 |
| Hovedtelefonernes kabel-længde (m) | 0.2 |
| Headphone Cable Length (ft) | 0.7 |
| Ear Cup External Height (in) | 2.5 |
| Ear Cup External Width (in) | 2.5 |
| Ear Cup Internal Height (in) | 1.2 |
| Ear Cup Internal Width (in) | 1.2 |
| Ear Cup Depth (in) | 0.6 |
| Højde (cm) | 6.5 |
| Bredde (cm) | 6.5 |
| Indre bredde (cm) | 3 |
| Indre højde (cm) | 3 |
| Dybde (cm) | 1.6 |
Control Connect Specifications
| Bluetooth-profiler | HFP v1.5, HSP v1.2, A2DP v1.2, AVRCP v1.5 |
|---|---|
| Bluetooth-frekvens | 2.402GHz-2.48GHz |
| Bluetooth sender-modulation | GFSK,π/4DQPSK, 8DPSK |
| Bluetooth sender-effekt | 0-4 dbm |
Documents & Downloads
Gallery
What’s in the Box
- 1 x JR 310BT-hovedtelefoner
- 1 x USB-opladningskabel
- 1 x sæt klistermærker
- 1x lynguide
- 1 x garantikort
- 1 x advarselsdatablad
FAQs & How-Tos
Headphone Material Information
These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.
Was this helpful?
Thank you for your feedback!
Reset Information
| To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds. |
Was this helpful?
Thank you for your feedback!
Power and Pair Information
Press and hold the power button located on the RIGHT ear cup. Make sure that the device is on and in Bluetooth range. If this is the first time connecting the device, it will automatically go into pairing mode. You will notice the LED light alternate between blue and white as it searches for a device to connect to. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect.
Was this helpful?
Thank you for your feedback!
Microphone Information
Yes. This headphone has a built in microphone. To answer a call, press the power button which is located on the Left Ear Cup for 1 second. If you wish to hang up the call, press and hold the power button for 2 seconds.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00