JBL LIVE 400BT
Din lyd, unplugged
Sold from 2018 until now
Getting started with your JBL LIVE 400BT
Documents & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 40.0
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 106dB SPL@1kHz/Pa
- Dynamisk frekvensområde (Hz)
- 20Hz – 20kHz
- Impedans (ohm)
- 32.0
- Antal dynamiske enheder pr. øre
- 1.0
- Hovedtelefonernes kabel-længde (cm)
- 133.4
- Hovedtelefonernes kabel-længde (ft)
- 4.38
- Vægt (g)
- 185.8
- Vægt (oz)
- 6.83
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2
- Bluetooth-frekvens
- 2.402 – 2.480GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth sender-effekt
- 0-4 dbm
- Bluetooth-version
- 4.2
- Ladetid (timer fra helt afladet)
- 2.0
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 24.0
- Maksimal spilletid (timer)
- 24.0
- Taletid (timer)
- 24.0
- Bluetooth
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Aftageligt kabel
- Ja
- Bekvem og velsiddende stof-hovedbøjle
- Ja
- Kan foldes fladt, så de er nemme at opbevare
- Ja
- Håndfri opkald
- Ja
- Den berømte JBL-lyd
- Ja
- Flerpunktsforbindelse
- Ja
- On-ear
- Ja
- Genopladeligt batteri
- Ja
- Fjernbetjening på ørekopper?
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Nej
- Multifunktionel TalkThru-knap
- Ja
- Touch-knapper
- Ja
- Trådløse
- Ja
Trådløse on-ear hovedtelefoner
I din verden er fremragende lyd afgørende, så prøv de trådløse JBL LIVE400BT on-ear hovedtelefoner. JBL LIVE400BT-hovedtelefonerne er udstyret med store 40 mm enheder, som leverer den berømte JBL-lyd med forbedret bas, der giver ekstra liv og kraft til hvert eneste nummer på din playliste. Brug for en hjælper i hverdagen? Få nem adgang til Google Assistent eller Amazon Alexa med en let berøring på ørekoppen. Afspil din yndlingsplayliste, send din ven en besked, tjek vejrudsigten og meget mere – uden at se på din telefon. Men det er ikke alt. JBL LIVE400BT-hovedtelefonerne kan også hjælpe dig med at holde kontakten til omgivelserne takket være Ambient Aware-funktionen og TalkThru-teknologien, som giver dig mulighed for at føre en samtale uden at tage hovedtelefonerne af. Hovedtelefonerne er lette og komfortable takket være det blødt polstrede hovedbånd. Du kan nyde 24 timers trådløs musik efter bare 2 timers opladning. Her er mulighed for flerpunktsforbindelse, og det praktiske, aftagelige kabel med fjernbetjening/mikrofon lader dig rocke videre, når batteriet er tomt. Slå dig løs, mens du stadig er tunet ind, med JBL LIVE400BT-hovedtelefonerne.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, there are two ways to disable the voice assistant feature.
1) double tap the left ear cup, or 2) In the My JBL Headphones app, de-select both assistants.Was this helpful? Thank you for your feedback! -
Yes, you can use them for telephone conversations in both Bluetooth and wired mode when paired with a smart device.Was this helpful? Thank you for your feedback!
-
Yes, both voice assistants are supported by the JBL LIVE headphones.
Amazon Alexa or Google Assistant must be selected as the default voice assistant through the My JBL Headphones app.
The two voice assistants cannot be used simultaneously. You can always change your default voice assistant through the My JBL Headphones app.Was this helpful? Thank you for your feedback! -
- No, your Voice Assistant operates in the cloud and needs to be connected to the internet. .
Was this helpful? Thank you for your feedback! -
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
- Visit App store and download ‘Amazon Alexa’ App.
Was this helpful? Thank you for your feedback! -
To pair the JBL LIVE headphones the first time, switch the headphone on, look for the blinking blue light indicating pairing mode. Switch on Bluetooth on your source device, find the JBL LIVE headphones in Settings > Bluetooth and confirm pairing. To pair the JBL LIVE headphones from the second time onwards, or to link them with a different device, press and hold the power button until the blue flashing light is visible.Was this helpful? Thank you for your feedback!
-
With the headphones switched ON, press and hold both volume buttons for more than 5 seconds.
Your headphones are now reset to factory status.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with Us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00