Under Armour Headphones Wireless
Trådløse UA-hovedtelefoner - Udviklet af JBL
Sold from 2016 until now
Getting started with your Under Armour Headphones Wireless
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Bluetooth
- Speaker drivers
- JBL 5.8mm dynamic
- Battery type
- Rechargeable Lithium Ion Cylindrical Cell (3.7V 2 x 60 mAh)
- Frequency Response
- 10Hz–22kHz
- Connector
- Micro USB cable for charging
- Driver
- Premium 5.8mm Dynamic Driver
UA Headphones Wireless - Engineered by JBL
De trådløse UA-hovedtelefoner er udviklet af JBL og designet af atleter til atleter - for at sætte den nye standard for sportshovedtelefoner. Disse svedafvisende hovedtelefoner er bygget til at modstå enhver træning. Samtidig er dette med garanti de mest komfortable hovedtelefoner, du endnu har haft på. De vil aldrig genere dig, falde ud eller komme i vejen. JBL's trådløse UA-hovedtelefoner har Bluetooth, så du er fri for kabler og andet bøvl. Mikrofonen med tre knapper lader dig regulere lydstyrken og styre musik og opkald. Den virker både med iPhone- og Android-enheder. Med i købet får du medlemskab til MapMyFitness Premium, som giver dig overblik over din sundhed, så du kan følge dine fremskridt. Fyr op under enhver træning med den berømte JBL-lyd, som bringer dig helt i mål. Takket være de trådløse UA-hovedtelefoner fra JBL. Dette er lyden af top-præstationer.
FAQs & How-Tos
-
The product is Water Resistant and Sweat Resistant, but you cannot swim with these headphones.Was this helpful? Thank you for your feedback!
-
Yes, Once you've added your UA Sport Wireless Heart Rate to the UA Record mobile app any workout started on your UA Band will automatically connect to the headphones if powered on and present. The Band will indicate the heart rate sensor is connected and begin showing your heart rate zones using the color LED on the side of the Band.Was this helpful? Thank you for your feedback!
-
Although the product is Water Resistant and Sweat Resistant, continuous exposure to water over an extended period of time may damage your earphones.Was this helpful? Thank you for your feedback!
-
We recommend cleaning the earphones with audio or electronic wipes.Was this helpful? Thank you for your feedback!
-
To pair a different Bluetooth device, make sure that the unit is turned off. You then must press and hold the center button for about 3-5 seconds. You should see the light blink red and blue while it is in pairing mode and the audible voice should state, “looking for device”. You should see UA BT Wireless pop up on the device that you are attempting to pair it with. Choose that option and wait for the audible voice to state, “connected”Was this helpful? Thank you for your feedback!
-
Instructions are located on the back of the “Find Your Fit” insert in the product box. There will be a 15 Character Access Code printed on the insert card, or you can visit www.mapmyfitness.com/promo/UAWireless. If you are not a MMF Member you will need to register on the website before you can redeem your Access Code. If you are already a MMF Member with an Annual Premium Membership you can visit the link and use your code to renew for 1-Year when your membership is up for renewal. Refer to the expiration date on your Access Code to ensure that it does not expire. If you are a MMF Member with a monthly Premium Membership you can cancel your monthly premium and then visit the link to enter the 1-Year Access Code.Was this helpful? Thank you for your feedback!
-
Press and hold the center button for 3-5 seconds until the audible voice states “power off” you will briefly see a red light before it completely powers down.Was this helpful? Thank you for your feedback!
-
To power on the device, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audible voice stating, “powering on” and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the UA WIRELESS headphone. Once you select that option, the audible voice should state, “connected”.Was this helpful? Thank you for your feedback!
-
No, the case is NOT waterproofWas this helpful? Thank you for your feedback!
-
The device is charged by a standard micro USB charger. To charge the unit, gently pull out the rubber cover just below the light indicator on the left side of the inline mic. You will see the the charging cable end.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
