Under Armour True Wireless Flash – Engineered by JBL
Ægte trådløse sportshovedtelefoner til alle dine løbeture. Med teknologi og lyd fra JBL.
Sold from 2018 until now
Getting started with your Under Armour True Wireless Flash – Engineered by JBL
Quick Start Guide & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 5.8
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 95dB
- Dynamisk frekvensområde (Hz)
- 20Hz-22kHz
- Impedans (ohm)
- 14.0
- Antal dynamiske enheder pr. øre
- 1.0
- Vægt (g)
- 16
- Vægt (oz)
- 0.56
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.5, HFP V1.6
- Bluetooth-frekvens
- 2.402GHz - 2.48GHz
- Bluetooth sender-modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth sender-effekt
- <9.5 dbm
- Bluetooth-version
- 4.2
- Ladetid (timer fra helt afladet)
- 2.0
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 5+20
- Maksimal spilletid (timer)
- 5.0
- Taletid (timer)
- 5.0
- Bluetooth
- Ja
- Charging cable
- Ja
- Stemmeassistent
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- JBL Charged Sound
- Ja
- Genopladeligt batteri
- Ja
- Fjernbetjening på ørekopper?
- Ja
- Svedsikre
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Ægte trådløse
- Ja
- UA STORM Proof
- Ja
- Vandtæt
- Ja
- Trådløse
- Ja
- Indbygget Google Assistent
- Ja
Trådløs frihed, så du kan nå endnu længere
UA True Wireless Flash giver en ægte trådløs oplevelse, så du kan strække dig lidt længere. UA vandtæt teknologi og Sport Flex Fit ørepropper er fremstillet specielt til alle former for træning, mens JBL Charged Sound er blevet dristigt optimeret og justeret med henblik på motivation. Hør dine omgivelser med Bionic Hearing med TalkThru-teknologi – så kan du hurtigt kommunikere med din træningsmakker, og med AmbientAware-teknologi kan du fastholde opmærksomheden på dine omgivelser for øget sikkerhed. Med i alt 25 timers batteritid og en solid aluminiumsæske til opladning bryder disse hovedtelefoner virkelig grænserne.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
First, it is very important that you use the correct size enhancers (rubber tips). While the tips may appear too large, these do not go all the way into your ear canal. The enhancers are supposed to fill the entire bowl (concha) of your ear, so please be sure to try both sizes to ensure a comfortable fit. To properly put them on, first make sure you have the Right and Left earbud in the correct ear. Next, gently insert the enhancer into your ear with a forward motion towards the jaw, twist and lock into place. If you’re unable to find a secure fit with both sizes in the box, we can send you a complimentary sizing pack with two additional sizes. Please email us from our Support Page at https://www.jbl.com/support-contact.html to request yours today.Was this helpful? Thank you for your feedback!
-
This headphone does not feature volume control. You must manually control volume from your device.Was this helpful? Thank you for your feedback!
-
To activate TalkThru Technology, press the LEFT ear for a short press for 1 Second which allows you to clearly hear others for quick conversations without removing headphons. Music volume level should lower when TalkThru is engaged. Press again for 1 second to turn off Talk Thru.Was this helpful? Thank you for your feedback!
-
To activate Ambient Aware DOUBLE CLICK the center button located on the LEFT ear. You should hear the music level drop. To resume to normal music level, DOUBLE CLICK the center button on LEFT ear again.Was this helpful? Thank you for your feedback!
-
The UA Flash does not support AptX or AAC audio codecsWas this helpful? Thank you for your feedback!
-
To take a phone call, press the center button of the RIGHT ear for 1 second. To hang up a call, press and hold the center button on the RIGHT ear for 1 second. To ignore a call, press and hold center button for 3 seconds until music resumes.Was this helpful? Thank you for your feedback!
-
To charge the UA Flash, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly: 0= 0% Dead 2-3 = 40%-50% 4=100% Full battery lifeWas this helpful? Thank you for your feedback!
-
To pause/play music, press center button on RIGHT ear for 1 second. To skip tracks forward, DOUBLE CLICK the center button on RIGHT ear. Unfortunately, you cannot skip tracks backward.Was this helpful? Thank you for your feedback!
-
To connect to a new device, begin with the headphones powered off and hold the center button on the RIGHT headphone for 5 seconds to enter pairing mode. You will hear the BT pairing audible chime as it searches for a different device. Make sure the device you are wanting to connect to is in range and BT is on. Once connected you will hear the audible Connected chime. Once Right ear is connected, press and hold the center button on LEFT ear for 3 seconds as it powers on and connects to the device followed by the same Connected audible chime.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00