JBL Tune 125TWS
Ægte trådløse hovedtelefoner.
Sold from 2020 until now
Getting started with your JBL Tune 125TWS
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 5.8
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 96
- Dynamisk frekvensområde (Hz)
- 20 Hz – 20 kHz
- Impedans (ohm)
- 14
- Antal dynamiske enheder pr. øre
- 1
- Vægt (g)
- 60.1
- Charging Case Weight (oz)
- 2.1
- Vægt (g)
- 13.6
- Earpiece Weight (oz)
- 0.5
- Bluetooth-profiler
- A2DP 1.3, AVRCP 1.5, HFP V1.7
- Bluetooth-frekvens
- 2.402 GHz – 2.480 GHz
- Bluetooth sender-modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth sender-effekt
- 0 - 12dbm
- Bluetooth-version
- 5.0
- Charging case battery life (max hours)
- 24
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 8
- Bluetooth
- Ja
- Charging cable
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- JBL Pure Bass-lyd
- Ja
- Genopladeligt batteri
- Ja
- Fjernbetjening på ørekopper?
- Ja
- Ægte trådløse
- Ja
- Trådløse
- Ja
Ren bas. Ingen kabler.
Dyk ned i din egen verden. Uanset om du lytter til musik eller modtager opkald, er der ingen ledninger, der holder dig tilbage. Du skal bare sætte JBL TUNE 125TWS-ørestykkerne i for at opleve lyden. De kobler sig på din enhed, så snart du tager dem ud af æsken. Med Dual Connect kan du bruge ethvert af de to ørestykker, eller begge to, præcis som du foretrækker. Dine yndlingsartister lyder fantastisk takket være JBL Pure Bass. Med op til 32 timers batteritid og en behagelig pasform kan du holde musikken kørende dag og nat. Vælg blandt et væld af farver for at finde de totalt trådløse hovedtelefoner, der bedst matcher din personlige stil.
JBL har gennem årtier leveret lyd til festivaler og koncerter i hele verden. Nu vækker JBL din egen verden til live med den fantastiske Pure Bass-lyd.
Ledninger filtrer sammen i din taske, sidder fast i din jakke eller dit hår – og er i det hele taget bare til besvær. Oplev total frihed uden ledninger med True Wireless JBL TUNE 125TWS-ørestykkerne.
Med op til 32 timers batteritid kan du lytte både dag og nat. Hold gang i din egen private koncert, lige så længe du orker.
Hvorfor skulle du vente? Så snart du tager dine ørestykker ud af æsken, bliver de
parret med din Android-enhed med et enkelt tryk. Efter parring kan andre enheder også registreres, også selv om de ikke er parrede. Nyd den fantastiske JBL-lyd - så let som ingenting.
Venstre øre, højre øre, begge ører? Med Dual Connect kan du nemt vælge mellem at lytte til musik eller foretage opkald med enten det ene eller begge ørestykker. Og batteriet løber aldrig tør, fordi kan du oplade det ene ørestykke, mens du bruger det andet.
Hvad fungerer bedst for dig? Med det store udvalg af farver kan du nemt finde det perfekte par JBL TUNE 125TWS-ørestykker. Der er et par til enhver stil, uanset om du vil være diskret eller skille dig ud.
FAQs & How-Tos
8 results
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback!
-
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).Was this helpful? Thank you for your feedback!
-
This headphone does not feature volume control. You must manually control volume from your device.Was this helpful? Thank you for your feedback!
-
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
