Reflect Aware

Product Specifications

Specifikationer

Lightning connector

Dynamic Drivers (mm): 14.8

Lydspecifikationer

Frequency Response: 10 Hz-22 kHz

Vær aktiv - men opmærksom

Få mere ud af din træning ved at sætte filter på støjen. De nye JBL Reflect Aware™-sportsøretelefoner giver dig klassens bedste støjreduktion - samt muligheden for at mixe musikken med lyden fra dine omgivelser. Glæd dig til at opleve verdens mest alsidige sportsøretelefoner. Reflect Aware™ er optimeret til sport med et unikt refleksdesign og en ergonomisk pasform, der holder ørestykkerne fast under den mest intense træning. De svedbestandige øretelefoner leveres i blå, sort, rød og turkis og kræver ikke noget batteri, da både strøm og digital lyd trækkes fra Lightning-stikket på dine Apple-enheder.

Støjreduktion

Luk verden ude, når du vil træne fokuseret og uden forstyrrelser – eller luk lidt af den ind, når du foretrækker det sådan. JBL Reflect Aware™-øretelefonerne er nemme at bruge - uden en klodset batteriboks.

Adaptiv støjkontrol

Juster niveauet for omgivende støj, så du fortsat kan være opmærksom på dine omgivelser, uanset om du træner inde eller ude.

Lightning-stik

Fjerner behovet for et klodset batteri, fordi du får strøm og digital lyd direkte fra din Apple-enhed.

JBL's berømte lyd

I mere end 60 år har JBL forfinet den præcise og naturlige lyd, du finder i biografer, koncertsale og lydstudier verden over.

Svedbestandig

Du behøver ikke skrue ned for træningen for at beskytte disse øretelefoner. JBL Reflect Aware™ er svedbestandige, vandtætte og nemme at rengøre.

Ergonomiske ørespidser

Ørespidserne er konstrueret til at udelukke støj - og blive siddende.

Reflekskabler

De smarte og filterfrie kabler er designet til at give dig maksimal synlighed, mens du træner.

FAQs & How-Tos

9 results

Sort

Page size

How to connect your headphones to the Amazon Alexa for Android and iOS devices
Visit the App Store and download the ‘Amazon Alexa’ App.
1. Click the Plus(+) button on the top right of the screen.
2. Then select ‘Add Device‘.
3. Select headphones from the list and then choose your Headphones from the list of available devices.
4. Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback!
How to connect your headphones to the Google Assistant for Android devices

If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.
Step 1

Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:
Step 2

PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.

Was this helpful? Thank you for your feedback!
How to connect your headphones to the Google Assistant for iOS devices

Visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.
Step 1

Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:
Step 2

PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.

Was this helpful? Thank you for your feedback!
How to switch between voice assistants using the My JBL Headphone app
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

You can change the default assistant in the ‘My JBL Headphones’ app:
1. Open the My JBL Headphones app on your device.
2. Select the headphones you are connected too.
3. Go to Settings by clicking the symbol in the top right corner.
4. Select Voice Assistant.
5. Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.
Was this helpful? Thank you for your feedback!
How to use Amazon Alexa with your headphones
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.

Things to try
- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
Stop Alexa when she talks
While Alexa is talking, press and release the Action button then say “Stop”.

For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
Was this helpful? Thank you for your feedback!
How to use Google Assistant with your headphones

After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.

Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones

Get your notifications
Double-tap the Action button.

Stop your Google Assistant
Touch the Action button.

Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

Was this helpful? Thank you for your feedback!
Is this a wireless headphone?

No. This is a wired headphone that uses an Apple lightning connector to deliver powerful and clear sound.

Was this helpful? Thank you for your feedback!
My JBL Headphones App Support

This headphone is supported by the My JBL Headphones App.

Was this helpful? Thank you for your feedback!
Trouble accessing the Google Assistant or Amazon Alexa on your Headphone

First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.

Was this helpful? Thank you for your feedback!