JBL Live 300TWS

JBL Live 300TWS

Ægte trådløse øretelefoner med Smart Ambient

Sold from 2019 until now

Getting started with your JBL Live 300TWS

Getting started with your JBL Live 300TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Enheds-størrelser (mm)
5.6
Enheds-følsomhed ved 1kHz/1mW (dB)
95
Dynamisk frekvensområde (Hz)
20 Hz – 20 kHz
Impedans (ohm)
16
Antal dynamiske enheder pr. øre
1
Charging Case Weight (oz)
1.9
Earpiece Weight (oz)
0.5
Vægt (g)
53.7
Vægt (g)
13.6
Bluetooth-version
5.0
Bluetooth-profiler
A2DP 1.3, AVRCP 1.5, HFP 1.6
Bluetooth-frekvens
2.402 GHz – 2.480 GHz
Bluetooth sender-modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth sender-effekt
0 - 13dbm
Ladetid (timer fra helt afladet)
2
Maksimal spilletid (timer)
6
IPX-rating
IPX5
Charging cable
Ja
Stemmeassistent
Ja
Lader lyd fra omgivelserne passere
Ja
Indbygget mikrofon
Ja
Håndfri opkald
Ja
Den berømte JBL-lyd
Ja
Svedsikre
Ja
Multifunktionel TalkThru-knap
Ja
Ægte trådløse
Ja
Touch-knapper
Ja
Trådløse
Ja
Smart opladningsetui
Ja
Lynopladning (5 min. = 1 t spilletid)
Ja
Genopladeligt batteri
Ja
Bluetooth
Ja

Ægte trådløse øretelefoner med den berømte JBL-lyd.

Tag kontrol over dine omgivelser. Hold forbindelsen til din musik og din omverden med JBL LIVE 300TWS øretelefonerne. De er ægte trådløse og helt fri for ledninger, så du får den ultimative frihed sammen med den berømte JBL-lyd. Du kan tune ind eller ud med støjkontrol. Hør dine omgivelser med Ambient Aware, og brug TalkThru til at snakke med vennerne. Alt sammen uden at fjerne dine øretelefoner. Stemmeassistent, håndfri opkald, lydstyrke og støjkontrol er alle tilgængelige med nem og enkel touch-styring, og takket være den lynhurtige opladning behøver du aldrig undvære din musik. Vælg mellem et væld af farver for at matche din stil. Kompakt størrelse - kraftfuld lyd. (*) Understøttes kun på Android. (**) Android 6.0 eller højere er påkrævet for fuld adgang til Alexa-funktioner, når denne enhed bruges.

Kompakt størrelse - men masser af power. JBL LIVE 300TWS øretelefonerne leverer den lyd, du forventer fra JBL.
Tag kontrol over verden omkring dig. Flyt hurtigt dit fokus fra musikalsk fordybelse til dine omgivelser med Ambient Aware. Eller brug TalkThru for at snakke med vennerne uden at tage øretelefonerne ud. Det kræver blot et let fingerstrejf på ørestykkerne.
Vær aldrig uden musik. JBL LIVE 300TWS øretelefonerne giver dig 6 timers afspilning på én opladning. Og når du lægger dem i lade-euiet, får du 14 timers ekstra spilletid. Du får strøm til en hel time på bare 10 minutter.
JBL LIVE 300TWS øretelefonerne er totalt trådløse. Her er intet, der holder dig tilbage eller binder dig.
Tag musikken med dig, og hold kontakten, med perfekte og klare stereo-opkald uden baggrundsstøj - uanset hvor du er i verden, og hvad du laver. Oplev total og uforstyrret frihed med håndfri funktionalitet og komplet touch-styring.
Nyd nem adgang til Google Assistent og Amazon Alexa - lige i øret. Få opfyldt dine ønsker - nemmere end nogensinde. Vælg din foretrukne assistent med My JBL Headphones-appen - og væk den til live med et let strejf på ørestykkerne. (*) Understøttes kun på Android. (**) Android 6.0 eller højere er påkrævet for fuld adgang til Alexa-funktioner, når denne enhed bruges.
Vælg det par, der passer dig. De supersmarte JBL LIVE 300TWS øretelefoner fås i et væld af farver.
Lyt hele dagen med fuld komfort. JBL LIVE 300TWS øretelefonerne leveres med vingeformede stabilisatorer i fire forskellige størrelser.
Lad dig ikke stoppe af dårligt vejr eller hård træning. De IPX5-certificerede JBL LIVE 300TWS øretelefoner er både svedsikre og vandafvisende.
Takket være Googles teknologi til hurtig parring bliver dine JBL LIVE 300TWS forbundet til din Android-enhed i samme sekund, du tager dem ud af etuiet. Du kan også parre flere enheder ved blot at trykke på enhedens skærm.

FAQs & How-Tos

19 results
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
    * Location
    Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
    Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
    Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
  • To re-establish the functionality of the Advanced Swipe Controls (details in the image below), first update the My JBL Headphones app in the Google Play/App Store.
    After the installation is completed, pair the earbuds to your phone/tablet through Bluetooth and open the app.
    The earbuds will be detected and displayed in the app and you should see that a Firmware update is available.

    L300TWSFAQ.png
    Note: Advanced touch controls are deactivated by default, in the My JBL Headphones app go to Settings Settings.png once your earbuds are displayed, then select Gestures and enable Advanced Swipe Controls. You can now select each function and assign it to a specific gesture.

    HPAPPSW1.png HPAPPSW2.png
    HPAPPSWIPE1.png HPAPPSWIPE2.png
     
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00