JBL Live Free 2 TWS
Hold stemningen høj hele dagen med denne stilfulde makker til både arbejde og fritid. JBL Live Free 2 øretelefonerne giver dig op til 35 timers fantastisk JBL-signaturlyd (med 7 timer i øretelefonerne + 28 timer i etuiet). Plus hurtig opladning og Qi-kompatibel trådløs opladning, når batteriet trænger til et boost. Ægte adaptiv støjreduktion fjerner alle forstyrrelser, så du kan fordybe dig helt i lyden. Med Smart Ambient kan du fastholde opmærksomheden på dine omgivelser. Ovale rør og et slankt pilleformet design giver en perfekt, tæt pasform, også i mindre ører – hvilket sikrer bedre isolering mod støj og forbedret lydkvalitet. Har du noget at sige? Nyd klare, perfekte samtaler med seks stråleformende mikrofoner. Eller tilslut din foretrukne stemmeassistent for nem, håndfri kontrol og forbindelse, uanset hvor livet fører dig hen.
Product Specifications
General Specifications
| Enheds-størrelser (mm) | 11 |
|---|
Audio Specifications
| Enheds-følsomhed ved 1kHz/1mW (dB) | 102 |
|---|---|
| Dynamisk frekvensområde (Hz) | 20 Hz - 20 kHz |
| Impedans (ohm) | 32 |
Dimension Specifications
| Ørestykke | 4,9 g per styk (9,8 g i alt) |
|---|---|
| Opladningsetui | 43,7 g |
Control Connect Specifications
| Bluetooth-version | 5.2 |
|---|---|
| Bluetooth-profiler | A2DP V1.3, AVRCP V1.6, HFP V1.8 |
| Bluetooth-frekvens | 2.4 GHz - 2.4835 GHz |
| Bluetooth sender-modulation | GFSK, π/4 QPSK, 8DPSK |
| Bluetooth sender-effekt | < 9 dBm EIRP |
Documents & Downloads
Videos
What’s in the Box
- 1 x JBL Live Free 2 øretelefoner
- 1 x 3 størrelser ørespidser
- 1 x type-C USB-opladningskabel
- 1 x opladningsetui
- 1 x garanti/advarselsark
- 1 x lynvejledning / sikkerhedsdatablad
FAQs & How-Tos
Can my headphones be connected to two devices simultaneously?
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.
Was this helpful?
Thank you for your feedback!
Voice Assistant Headphone Connection
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1
Was this helpful?
Thank you for your feedback!
LIVE FREE 2 TWS: Software Update Release Notes
LIVE FREE 2 TWS
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V6.9.8
Version (iOS): V5.7.9
Version (Android): V5.7.9
Release Date: July 8, 2022
Release Media: OTA via JBL Headphone App
What’s New
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V6.9.8
Version (iOS): V5.7.9
Version (Android): V5.7.9
Release Date: July 8, 2022
Release Media: OTA via JBL Headphone App
What’s New
- Added Microsoft Swift Pairing feature.
- Fixed a few minor software bugs for better user experience.
Was this helpful?
Thank you for your feedback!
How to Factory Reset True Wireless Stereo Earbuds
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00