JBL Tune 110
hovedtelefoner
Sold from 2016 until now
Getting started with your JBL Tune 110
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 9.0
- Number of Microphones
- 1
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 96.0
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Impedans (ohm)
- 16.0
- Antal dynamiske enheder pr. øre
- 1.0
- Hovedtelefonernes kabel-længde (cm)
- 111.3
- Hovedtelefonernes kabel-længde (ft)
- 3.65
- Hovedtelefonernes kabel-længde (m)
- 111.3
- Vægt (g)
- 12.7
- Vægt (oz)
- 0.45
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Indbygget mikrofon
- Ja
- Sammenfiltringsfrit, fladt kabel
- Ja
- Håndfri opkald
- Ja
- JBL Pure Bass-lyd
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Nej
En bas, der rocker - og er klar til at rulle.
Vi er glade for at præsentere JBL TUNE110 hovedtelefonerne. Lette, bekvemme og kompakte. Under den robuste kapsel leverer et par 9 mm enheder den fedeste bas, der gengiver JBL Pure Bass-lyden, som du kender fra alverdens koncertsale, scener og indspilningsstudier. Med et-knaps-fjernbetjeningen på det flade, filterfrie kabel kan du styre afspilningen af musik og hurtigt besvare opkald via den indbyggede mikrofon. Derfor bliver JBL TUNE110 din daglige følgesvend på arbejdet, i hjemmet og på farten.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
The USB charging port will be located on the inline microphone located on the RIGHT side of the earphones.Was this helpful? Thank you for your feedback!
-
To power on the headphones, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audio chime and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the T110BT headphone. Once you select that option, you will hear the confirmation tone. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible tone and then the confirmation chime once it is connected. You will see the Bluetooth light alternate between red and blue when it is in pairing mode and then to a slow blinking LED blue light once it is connected to your device.Was this helpful? Thank you for your feedback!
-
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with Us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
