JBL Free
Ægte trådløse øretelefoner
Sold from 2017 until now
Getting started with your JBL Free
Quick Start Guide & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 5.6
- Enheds-følsomhed ved 1kHz/1mW (dB)
- < 9.5dBm
- Dynamisk frekvensområde (Hz)
- 10Hz – 22kHz
- Impedans (ohm)
- 16.0
- Antal dynamiske enheder pr. øre
- 1.0
- Vægt (g)
- 99.0
- Vægt (oz)
- 3.49
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
- Bluetooth-frekvens
- 2.402 – 2.480GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth sender-effekt
- <9.5 dbm
- Bluetooth-version
- 4.2
- Ladetid (timer fra helt afladet)
- 2.0
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 4.0
- Maksimal spilletid (timer)
- 4.0
- Taletid (timer)
- 4.0
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Etui
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- Den berømte JBL-lyd
- Ja
- Genopladeligt batteri
- Ja
- Fjernbetjening på ørekopper?
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Nej
- Svedsikre
- Ja
- Ægte trådløse
- Ja
- Trådløse
- Ja
Opkald, musik, aktiv – valget er dit. Ingen ledninger.
De ægte trådløse JBL Free øretelefoner giver dig den berømte JBL-lyd i en intuitiv og intelligent pakke. JBL Free er helt fri for kabler og nemme at bruge – din fleksible ledsager til opkald, musik og en aktiv livsstil. Du får 24 timers kombineret afspilning: 4 timers uafbrudt lytning på hovedtelefonerne plus 20 timers backup fra det smarte opladningsetui. Comfort Stay Secure Fit-ergonomien med ørespidser i 3 størrelser og gelkraver i 2 størrelser leverer en solid og skræddersyet pasform til en lang dags aktiv brug. Du skal ikke bekymre dig. Det stænksikre og IPX5-certificerede design holder musikken kørende i både sol og regn. Gør din lytteoplevelse endnu bedre på tre nemme måder: (1) Brug én øretelefon til opkald, (2) brug to øretelefoner til fordybende musik, og (3) tilføj gelkraverne, så øretelefonerne sidder sikkert, når du træner.
FAQs & How-Tos
-
No. The JBL Free does not feature volume control. It features pause/play and track control.Was this helpful? Thank you for your feedback!
-
Press and hold the RIGHT center button for 1-2 seconds.Was this helpful? Thank you for your feedback!
-
Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback!
-
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).Was this helpful? Thank you for your feedback!
-
What you are experiencing is normal. The JBL Free will automatically switch to mono mode on the RIGHT ear when the call starts. After the call ends stereo music mode will automatically resume.Was this helpful? Thank you for your feedback!
-
No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.Was this helpful? Thank you for your feedback!
-
When you place the two Free earphones in the charging case, you will see a white led ring light up on both of them. At the same time, some of the four dot-leds on the charging case will light up to indicate the battery level of the case battery. When the earphones are fully charged, the white led ring goes out on each of them. When both are fully charged, the charging case charging level leds go out too.Was this helpful? Thank you for your feedback!
-
The JBL Free automatically switches from stereo to mono when making or taking phone calls. Voice calls will only come through the right ear piece for a more natural call experience.Was this helpful? Thank you for your feedback!
-
In the event that left and right ear piece pairing is lost, power on both ear pieces and press the buttons 3 times on each ear piece to initiate re-pair.Was this helpful? Thank you for your feedback!
-
In the event that ear pieces do not re-pair automatically to paired Bluetooth device, power off ear pieces individually by press and hold the buttons for 5 seconds. To enter Bluetooth pairing mode when ear pieces are powered off, press and hold on buttons of both earpieces for 8 seconds. Re-pair the right ear piece with desired Bluetooth device when LED indicator on right ear piece alternates between blue and white LED lights.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00