JBL Endurance Peak II

JBL Endurance Peak II

Vandtætte, totalt trådløse sports-øretelefoner

Sold from 2020 until now

Getting started with your JBL Endurance Peak II

Getting started with your JBL Endurance Peak II

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Enheds-størrelser (mm)
10
Enheds-følsomhed ved 1kHz/1mW (dB)
95
Dynamisk frekvensområde (Hz)
20 Hz - 20 kHz
Impedans (ohm)
16
Antal dynamiske enheder pr. øre
1
Charging Case Weight (oz)
2.7
Earpiece Weight (oz)
0.9
Vægt (g)
77
Vægt (g)
26
Bluetooth-version
5.0
Bluetooth-profiler
A2DP 1.3 AVRCP 1.5 HFP 1.7
Bluetooth-frekvens
2.4 GHz – 2.4835 GHz
Bluetooth sender-modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth sender-effekt
0 - 13dbm
Ladetid (timer fra helt afladet)
2
Maksimal spilletid (timer)
6
IPX-rating
IP67
Stemmeassistent
Ja
Indbygget mikrofon
Ja
Håndfri opkald
Ja
JBL Pure Bass-lyd
Ja
PowerHook™
Ja
Svedsikre
Ja
Ægte trådløse
Ja
Touch-knapper
Ja
Trådløse
Ja
Vandtæt
Ja
Smart opladningsetui
Ja
Genopladeligt batteri
Ja
Bluetooth
Ja

Gør aldrig ondt, falder aldrig ud

Seriøs træning fortjener seriøst udstyr. De totalt trådløse JBL Endurance Peak II-hovedtelefoner leverer JBL Pure Bass-lyd til din træning og sørger for komfort og tilslutninger, så du kan holde dig i gang. Få ekstra motivation med 30 timers kombineret batteritid fra det øjeblik, du tager dem på, takket være Powerhook™. Med den intuitive touch-betjening kan du foretage håndfri opkald og få adgang til din stemmeassistent. Den dobbelte tilslutning giver dig fuld kontrol, fordi ørestykkerne fungerer uafhængigt af hinanden. Deres ergonomiske pasform og svedtætte/vandtætte design gør dig i stand til at træne længere og hårdere, uanset hvor træningen fører dig hen.

Her er nok bas til at give hele kroppen et boost, så du får ekstra power, når du behøver det mest.
Med et batteri, der holder lige så længe som dig, får du den ekstra inspiration, der bringer dig helt i mål.
Endurance PEAK II tilpasser sig til dig - ikke omvendt. Den bøjelige ledning på ørekrogen giver dig mulighed for at justere hovedtelefonerne til din størrelse for optimal komfort. Fasthold fokus på din træning med musik, der starter og stopper, når du gør det. Betjeningen er så intuitiv, at den næsten læser dine tanker, så intet forstyrrer din træning.
Det er ligegyldigt, hvilket ørestykke du først tager ud af etuiet. Du kan foretage opkald, justere lydstyrken og bruge stemmeassistenten på begge ører. Denne fleksibilitet betyder, at du aldrig bliver forstyrret i din træning.
Hold kontakt med andre, og bevar kontrollen over din afspilning, uden nogensinde at afbryde dit træningsflow.
Kom bare an. Bliv så våd, du vil. Hvad enten det skyldes regn eller ægte, ærlig sved. Du skal ikke bekymre dig om Endurance Peak II, for de er sved- og vandtætte - og klar til at følge dig hele vejen. Med IP67-klassificeringen er disse hovedtelefoner ekstremt robuste og klar til at modstå elementernes rasen.

FAQs & How-Tos

6 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • There are several easy ways to prevent damage to your headphones, and please follow the steps below.

    1. If the USB port has a cover, please always have it covered, except when charging.

    2. Always be sure the USB port and connector are dry before connecting to charge.

    3. Do not allow any oils, stains, sweat, or corrosive materials to contact the charging port. It will eventually damage the port.

    4. Do not damage or block the USB port. For example, do not force it in if you have trouble inserting the USB connector into the port. Instead, examine the port and remove foreign substances that might be inside or blocking the port.

    If you need more assistance, please contact the Customer Service team.
     
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00