JBL Vibe Buds 2
Totalt trådløse øretelefoner med støjreduktion, JBL Pure Bass-lyd og Smart Ambient-teknologi
Getting started with your JBL Vibe Buds 2
Quick Start Guide & Downloads
Product Specifications
- Driver size
- 8.0 mm/ 0.32'' Dynamic Driver
- Power supply
- 5V 1A
- Maximum operation temperature
- 45 °C
- Frequency response
- 20 Hz - 20 kHz
- Impedance
- 16 ohm
- Sensitivity
- 110 dB SPL@1 kHz
- Maximum SPL
- 95 dB
- Microphone sensitivity
- -38 dBV/Pa@1 kHz
- Earbud weight
- 4.5 g per pc (9 g combined)/0.01 lbs per pc (0.02 lbs combined)
- Charging case weight
- 35 g/ 0.077 lbs
- Earbud dimensions
- 21.6*15.8*20.4 mm
- Charging case dimensions
- 68.9*26.7*37 mm
- Bluetooth version
- 5.3
- Bluetooth profile version
- A2DP V1.4, AVRCP V1.6.2, HFP V1.8
- Bluetooth transmitter frequency
- range
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power
- <13 dBm (EIRP)
- Bluetooth transmitter modulation
- GFSK, ð/4-DQPSK, 8DPSK
- Earbud battery type
- Lithium-ion battery (49 mAh/ 3.85 V)
- Charging case battery type
- Lithium-ion battery (550 mAh/ 3.8 V)
- Charging time
- 2 hrs from empty
- Music playtime with BT on and ANC off
- Up to 10 hrs
- Music playtime with BT on and ANC on
- Up to 8 hrs
- Talk time with ANC off
- Up to 6 hrs
- Talk time with ANC on
- Up to 5.5 hrs
Livet er for kort til at kede sig
Kvalitetslyd er lige blevet nemmere – og sjovere. JBL Vibe Buds 2-øretelefonerne har spændende JBL Pure Bass-lyd, aktiv støjreduktion og Smart Ambient-teknologi, så du bestemmer selv, hvor meget du vil høre af omgivelserne. Nyd håndfri, tydelige opkald med et enkelt tryk på øretelefonerne. Brug JBL Headphones-appen til at tilpasse lyden og sproget for stemmebeskeder. Forbind problemfrit med op til 8 Bluetooth®-enheder, og skift ubesværet fra den ene til den anden. Med op til 40 timers* afspilningstid er dette alletiders følgesvend i hverdagen (*med ANC slået fra).
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00