JBL Vibe 200TWS
Ægte trådløse øretelefoner
Sold from 2022 until now
Getting started with your JBL Vibe 200TWS
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 8
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 108
- Dynamisk frekvensområde (Hz)
- 20 Hz – 20 kHz
- Impedans (ohm)
- 16
- Vægt (g)
- 39.3
- Charging Case Weight (oz)
- 1.4
- Vægt (g)
- 8.7
- Earpiece Weight (oz)
- 0.3
- Bluetooth-profiler
- A2DP 1.3, AVRCP 1.6, HFP 1.7
- Bluetooth-frekvens
- 2.4 GHz – 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth sender-effekt
- 0 - 12dbm
- Bluetooth-version
- 5.0
- Charging case battery life (max hours)
- 15
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 5
- Bluetooth
- Ja
- Charging cable
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- Genopladeligt batteri
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Touch-knapper
- Ja
- Ægte trådløse
- Ja
- Trådløse
- Ja
- IPX-rating
- IPX2
Ægte trådløse øretelefoner
Løft din hverdag med den lyd, du elsker! Nyd den kraftfulde JBL Deep Bass Sound og ægte trådløs frihed i op til 20 timer med JBL Vibe 200TWS. Tag din verden med dig. Et tryk på øretelefonen håndterer dine opkald, din musik og din stemmeassistent. Med dual connect kan du bruge øretelefonerne en ad gangen og spare på batteriet. JBL Vibe 200TWS er ultralette, komfortable - og altid klar til sjov.
FAQs & How-Tos
-
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback! -
Make sure both headphones are fully charged to ensure that the issue is not due to one of the earbuds lacking power.
Check that the contact points on the headphones and the charging case are clear of dirt, so the issue is not due to the product not being able to charge.
The LED on the headphones will show a blue light when correctly inserted in the charging case.
Try to reset the headphones if the product is fully charged but are still only working in Mono mode.
A reset guide for the headphones can be found here: Reset guide
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
