JBL Tune 520BT - White - Wireless on-ear headphones - Hero JBL Tune 520BT - White - Wireless on-ear headphones - Front JBL Tune 520BT - White - Wireless on-ear headphones - Back
JBL Tune 520BT - White - Wireless on-ear headphones - Hero
  • JBL Tune 520BT - White - Wireless on-ear headphones - Swatch Image
  • JBL Tune 520BT - Black - Wireless on-ear headphones - Swatch Image
  • JBL Tune 520BT - Blue - Wireless on-ear headphones - Swatch Image
  • JBL Tune 520BT - Purple - Wireless on-ear headphones - Swatch Image

JBL Tune 520BT

Med JBL Tune 520BT kan du trådløst afspille kraftfuld JBL Pure Bass-lyd takket være den nyeste Bluetooth 5.3-teknologi. Disse hovedtelefoner er nemme at bruge og giver dig op til 57 timers ren nydelse - og 3 ekstra timers batteritid efter kun 5 minutters opladning. Hent den gratis JBL Headphones-app, og tilpas din lyd via EQ, mens stemmemeddelelser guider dig gennem hovedtelefonernes funktioner. Håndter opkald, lyd og lydstyrke fra ørekoppen takket være den praktiske knapstyring. Hvis du får et opkald, mens du ser en video på en anden enhed, skifter JBL Tune 520BT problemfrit til din mobil, så du aldrig går glip af et opkald. JBL Tune 520BT-hovedtelefonerne er lette og komfortable, selv efter mange timers lytning. De kan foldes fladt sammen i din rygsæk, så de følger dig overalt.

Product Specifications

General Specifications

Enheds-størrelser (mm) 33
Number of Microphones 1

Audio Specifications

Enheds-følsomhed ved 1kHz/1mW (dB) 102 dB SPL@ 1kHz 1mW
Dynamisk frekvensområde (Hz) 20 Hz – 20 kHz
Impedans (ohm) 30

Dimension Specifications

Vægt (g) 157
Vægt (oz) 5.54
Ear Cup External Height (in) 2.9
Ear Cup External Width (in) 2.9
Ear Cup Internal Height (in) 1.2
Ear Cup Internal Width (in) 1.2
Ear Cup Depth (in) .7
Højde (cm) 7.3
Bredde (cm) 7.3
Indre bredde (cm) 3.1
Indre højde (cm) 3.1
Dybde (cm) 1.8

Control Connect Specifications

Bluetooth-version 5.3
Bluetooth-profiler HFP 1.7.2, AVRCP 1.6.2, A2DP 1.3.2
Bluetooth-frekvens 2.4 GHz – 2.4835 GHz
Bluetooth sender-modulation GFSK, π/4-DQPSK, 8-DPSK
Bluetooth sender-effekt 6 dBm (E.I.R.P)
Please consult the documents for in-depth specs

Documents & Downloads

What’s in the Box

  • 1 x JBL Tune 520BT-hovedtelefoner
  • 1 x USB-C-ladekabel
  • 1 x garanti / advarselsark
  • 1 x startguide
JBL Tune 520BT - What's in the Box

FAQs & How-Tos

Can my headphones be connected to two devices simultaneously?
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
How can I reset the headphones?
Press volume + and volume - simultaneously for 5 seconds to reset.
The headphone must be ON while doing this.
My JBL Headphones App Support
This headphone is supported by the My JBL Headphones App.
Multi-Point Connection Support
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.

To connect to two devices at the same time:

1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection. 
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.

(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)


 
How to connect your headphones to the Google Assistant for iOS devices
Visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

Step 1

  Set up Google Assistant #1.png
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:

Step 2

Set up Google Assistant #2.png

PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
  Set up Google Assistant #3.png
Set up Google Assistant #4.png
How to connect your headphones to the Google Assistant for Android devices
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

Step 1

  Set up Google Assistant #5.png
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:

Step 2

Set up Google Assistant #2.png

PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Set up Google Assistant #3.png
Set up Google Assistant #4.png

Headphone Support Guide

Need help to resolve some the most common headphone challenges?

Learn more

Bluetooth Guide

Har du brug for hjælp til Bluetooth parring? Denne guide kan hjælpe dig

Lær mere

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00