JBL Live 660NC
Trådløse, omsluttende-hovedtelefoner med støjreduktion
Sold from 2020 until now
Getting started with your JBL Live 660NC
Quick Start Guide & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 40
- Number of Microphones
- 2
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 97 dB SPL@1 kHz/1 mW
- Dynamisk frekvensområde (Hz)
- 16 Hz – 20 kHz
- Impedans (ohm)
- 32
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Dybde (cm)
- 2.1
- Ear Cup Depth (in)
- 0.8
- Højde (cm)
- 9.3
- Ear Cup External Height (in)
- 3.7
- Bredde (cm)
- 7.6
- Ear Cup External Width (in)
- 3
- Indre bredde (cm)
- 6.4
- Ear Cup Internal Height (in)
- 2.5
- Indre højde (cm)
- 4.7
- Ear Cup Internal Width (in)
- 1.9
- Hovedtelefonernes kabel-længde (m)
- 0.2
- Headphone Cable Length (ft)
- 0.7
- Vægt (g)
- 265
- Bluetooth-profiler
- HFP V1.7, A2DP V1.3, AVRCP V1.6
- Bluetooth-frekvens
- 2.4 GHz – 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth sender-effekt
- < 10 dBm
- Bluetooth-version
- 5.0
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 50
- Maksimal spilletid med aktiv støjreduktion (timer)
- 40
- Maksimal spilletid (timer)
- 50
- Bluetooth
- Ja
- Charging cable
- Ja
- Stemmeassistent
- Ja
- Adaptiv støjreduktion
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Stofpose
- Ja
- Bekvem og velsiddende stof-hovedbøjle
- Ja
- Håndfri opkald
- Ja
- Den berømte JBL-lyd
- Ja
- Flerpunktsforbindelse
- Ja
- Over-ear
- Ja
- Genopladeligt batteri
- Ja
- Fjernbetjening på ørekopper?
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Trådløse
- Ja
Tryk på afspil, luk forstyrrelser ude.
I din verden er musik altafgørende, så tag et par JBL Live 660NC på, og gør din dag endnu bedre. JBL Live 660NC-hovedtelefonerne er udstyret med effektive 40 mm-enheder, som leverer den berømte JBL-lyd med forbedret bas, så hvert eneste nummer lever. Og når musikken er det eneste, der betyder noget, kan du med den adaptive støjreduktion lukke-omgivende lyde ude, så intet forstyrrer dig. Ambient Aware holder dig sikker, når du går på gaden med musikken tændt. Og med TalkThru kan du snakke med folk uden at tage dine JBL Live 660NC af. Brug for en hjælper i hverdagen? Få hjælp fra din foretrukne stemmeassistent med din stemme eller et tryk på ørekapslen. urn:oasis:names:tc:xliff:document:1.2http://www.gs4tr.org/schema/xliff-extHvis du opsætter Hey Google, kan du aktivere funktioner på dine JBL Live 660NC blot med din stemme. Ren magi! Hovedtelefonerne er lette og komfortable takket være det blødt-polstrede hovedbånd. Du kan nyde op til50 timers trådløs musik med aktiv støjreduktion slukket. Samtaler afspilles i perfekt stereo, og med det praktiske aftagelige kabel kan du rocke videre, selv om batteriet er tomt. Når de ikke er i brug, sættes dine Live 660NC automatisk på pause, og de begynder at spille igen, når du tager dem på. Slå dig løs, mens du stadig er tunet ind, med JBL Live 660 NC-hovedtelefonerne. (*) Understøttes kun på Android. (**) Android 6.0 eller højere er påkrævet for fuld adgang til Alexa-funktioner, når denne enhed bruges.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback! -
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
Things to try- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevicesWas this helpful? Thank you for your feedback! -
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00