|Enheds-følsomhed ved 1kHz/1mW (dB)||90|
|Dynamisk frekvensområde (Hz)||20Hz – 20kHz|
|Hovedtelefonernes kabel-længde (m)||0.2|
|Headphone Cable Length (ft)||0.7|
|Ear Cup External Height (in)||2.5|
|Ear Cup External Width (in)||2.5|
|Ear Cup Internal Height (in)||1.2|
|Ear Cup Internal Width (in)||1.2|
|Ear Cup Depth (in)||0.6|
|Indre bredde (cm)||3|
|Indre højde (cm)||3|
Control Connect Specifications
|Bluetooth-profiler||HFP v1.5, HSP v1.2, A2DP v1.2, AVRCP v1.5|
|Bluetooth sender-modulation||GFSK,π/4DQPSK, 8DPSK|
|Bluetooth sender-effekt||0-4 dbm|
Documents & Downloads
What’s in the Box
- 1 x JR 310BT-hovedtelefoner
- 1 x USB-opladningskabel
- 1 x sæt klistermærker
- 1x lynguide
- 1 x garantikort
- 1 x advarselsdatablad
FAQs & How-Tos
Multipoint Connectivity InformationThese headphones do not support Multipoint Connectivity, which means that they can only be connected to one Bluetooth device at a time.
Power and Pair Information
Press and hold the power button located on the RIGHT ear cup. Make sure that the device is on and in Bluetooth range. If this is the first time connecting the device, it will automatically go into pairing mode. You will notice the LED light alternate between blue and white as it searches for a device to connect to. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect.
Yes. This headphone has a built in microphone. To answer a call, press the power button which is located on the Left Ear Cup for 1 second. If you wish to hang up the call, press and hold the power button for 2 seconds.
Audio Cable Information
This headphone does not feature an audio cable jack. This is a Bluetooth only headphone.
To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds.
Headphone Material Information
These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.