JBL E65BTNC

JBL E65BTNC

Trådløse omsluttende hovedtelefoner med støjreduktion

Getting started with your JBL E65BTNC

Getting started with your JBL E65BTNC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Enheds-størrelser (mm)
40.0
Enheds-følsomhed ved 1kHz/1mW (dB)
95dB
Dynamisk frekvensområde (Hz)
20 Hz - 20 kHz
Impedans (ohm)
32.0
Antal dynamiske enheder pr. øre
1.0
Hovedtelefonernes kabel-længde (cm)
133.4
Hovedtelefonernes kabel-længde (ft)
4.4
Vægt (g)
258.0
Vægt (oz)
9,1
Bluetooth-version
4.1
Bluetooth-profiler
HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.4
Bluetooth-frekvens
2.402GHz-2.48GHz
Bluetooth sender-modulation
GFSK,π/4DQPSK, 8DPSK
Bluetooth sender-effekt
0-4 dbm
Ladetid (timer fra helt afladet)
2.0
Maksimal spilletid uden aktiv støjreduktion (timer)
30.0
Maksimal spilletid med aktiv støjreduktion (timer)
15.0
Taletid (timer)
24.0
Maksimal spilletid (timer)
24.0
Fjernbetjening på ørekopper?
Ja
Indbygget mikrofon
Ja
Aftageligt kabel
Ja
Bekvem og velsiddende stof-hovedbøjle
Ja
Kan foldes fladt, så de er nemme at opbevare
Ja
Håndfri opkald
Ja
Den berømte JBL-lyd
Ja
Flerpunktsforbindelse
Ja
Aktiv støjreduktion
Ja
Trådløse
Ja
Lynopladning (5 min. = 1 t spilletid)
Nej
Over-ear
Ja
Genopladeligt batteri
Ja
Bluetooth
Ja

Luk verden ude, så du kan være i musikken.

​JBL E65BTNC hovedtelefonerne giver dig den verdensberømte JBL-lyd i et iøjefaldende design med førsteklasses materialer. Samtidig får du trådløs bekvemmelighed og overlegen aktiv støjreduktion. JBL E65BTNC hovedtelefonerne har et blødt og behageligt stof-pandebånd og vinklede, perfekt siddende øremuffer, så du kan fordybe dig i musikken i timevis. Den aktive støjreduktion virker både trådløst og med ledning. Du får 24 timers trådløs spilletid med Bluetooth (15 timer med både Bluetooth og støjreduktion), og hovedtelefonen kan oplades helt på bare to timer. Multi-tasking er nemt, fordi JBL E65BTNC hovedtelefonerne problemfrit kan skifte mellem to enheder, så du aldrig går glip af et opkald, mens du nyder din musik eller ser en film. Du bliver også glad for den aftagelige, filterfri stofledning med fjernbetjeningsknap, udvalget af tre forskellige farver og det fladt foldbare design, som er let at tage med.

Den berømte JBL-lyd, som kendes fra teatre, arenaer og studier verden over, fås nu til hovedtelefoner.
Aktiv støjreduktion dæmper støjen fra omgivelserne, så du kan fordybe dig i din lydoplevelse.
Nyd krystalklar, trådløs lyd og håndfri telefonopkald.
Uden kabler kan du nyde den ene playliste efter den anden. Fra solopgang til solnedgang - og længere endnu.
En hurtig to-timers opladning giver dig op til 24 timers afspilning.
Skift let og ubesværet fra din bærbare enhed til en telefonsamtale, så du aldrig går glip af et opkald.
Optimeret ergonomisk design med bløde materialer giver en bedre pasform, så du kan lytte i timevis.
Giver mulighed for nem styring af musik og opkald fra stort set alle bærbare enheder
Tryk hurtigt to gange på ørekoppens afspil/pause-knap for at aktivere Siri eller Google Nu

FAQs & How-Tos

11 results
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • Yes. Our E series/Duet headphones are made with synthetic protein leather.
  • Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.
  • Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Yes, you do not need to have music playing to keep the noise cancelling switched on. There may be a slight residual hiss from the NC system, which would usually be masked by music, but there will still be a significant reduction of external noise.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • With the headphones switched ON, press and hold the Volume + and Volume - buttons for more than 5 seconds. The LED blinks slowly for about two seconds, and now you have reset to factory settings.
  • Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure the E65BTNC headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.
  • The E65BTNC noise cancellation button is located on the bottom Right ear cup. To turn the Active Noise Cancellation on, press and hold the button (Located next to the Bluetooth button) for 2-3 seconds or until you hear the confirmation audio tone. To turn off the noise cancellation, press and hold for 2 seconds or until you hear the audio tone powering off. A white LED next to the button lights up when NC is on.
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00