JBL Tune 710BT
Trådløse, omsluttende hovedtelefoner
Getting started with your JBL Tune 710BT
Documents & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 40
- Number of Microphones
- 1
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 103
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Impedans (ohm)
- 32
- Vægt (g)
- 220
- Vægt (oz)
- 7.76
- Hovedtelefonernes kabel-længde (m)
- 0.2
- Headphone Cable Length (ft)
- 0.7
- Ear Cup External Height (in)
- 3.6
- Ear Cup External Width (in)
- 3
- Ear Cup Internal Height (in)
- 2.1
- Ear Cup Internal Width (in)
- 1.5
- Ear Cup Depth (in)
- 0.8
- Højde (cm)
- 9.2
- Bredde (cm)
- 7.6
- Indre bredde (cm)
- 5.4
- Indre højde (cm)
- 3.7
- Dybde (cm)
- 2
- Bluetooth-version
- 5.0
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth-frekvens
- 2.4 GHz - 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK , 8DPSK
- Bluetooth sender-effekt
- < 10 dBm
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 50
- Remote control on ear cups
- Ja
- Fjernbetjening på ørekopper?
- Ja
- Charging cable
- Ja
- Sammenklappelig
- Ja
- Audio cable
- Ja
- Stemmeassistent
- Ja
- Indbygget mikrofon
- Ja
- Kan foldes fladt, så de er nemme at opbevare
- Ja
- Håndfri opkald
- Ja
- JBL Pure Bass-lyd
- Ja
- Flerpunktsforbindelse
- Ja
- Trådløse
- Ja
- Over-ear
- Ja
- Genopladeligt batteri
- Ja
- Bluetooth
- Ja
Masser af bas, masser af sjov.
JBL TUNE 710BT giver dig den kraftfulde JBL Pure Bass-lyd - trådløst. Det lette, omsluttende design giver maksimal komfort og medrivende lyd. Ydeevnen er fantastisk, og hovedtelefonerne kan foldes kompakt sammen, så de passer til ethvert eventyr. Besvar opkald og håndtér lyd uden brug af hænder takket være den praktiske knap på ørekoppen, der også aktiverer stemmeassistenterne, når du er på farten. Brug dem hele dagen takket være 50 timers batteritid, eller forlæng oplevelsen i det uendelige med det medfølgende, aftagelige lydkabel. Med forbindelse til to Bluetooth®-enheder samtidigt sikrer flerpunktsforbindelsen, at du ikke går glip af et opkald på din telefon, mens du ser film på din tablet. Vælg den farve, der matcher din stil eller dit humør, og oplev fantastisk lyd!
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
While using the Wired Aux Connection, the microphone will be switched off.Was this helpful? Thank you for your feedback!
-
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.
3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.
4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00