Tune 225TWS Ghost Edition
Bliv ét med din musik og din verden. Når du ikke holdes tilbage af ledninger, kan du for alvor nyde din yndlingsmusik med JBL Pure Bass. JBL Tune 225TWS Ghost Edition-ørestykkerne giver dig nem adgang til både musik og opkald. Luk æsken op, og begynd at lytte. JBL Tune 225TWS Ghost Edition-ørestykkerne parres øjeblikkeligt med din enhed, mens Dual Connect giver dig mulighed for at bruge enten ét af ørestykkerne eller begge. Forlæng den komfortable lytteoplevelse med op til 25 batteritimer. Søger du noget markant anderledes, som bidrager til din stil? Opdag den helt nye Ghost edition! Det gennemsigtige design, som fås i orange og sort, vækker opsigt med sit originale og moderne look.
Product Specifications
General Specifications
| Enheds-størrelser (mm) | 12 |
|---|
Audio Specifications
| Enheds-følsomhed ved 1kHz/1mW (dB) | 105 |
|---|---|
| Dynamisk frekvensområde (Hz) | 20 Hz – 20 kHz |
| Impedans (ohm) | 32 |
| Antal dynamiske enheder pr. øre | 1 |
Dimension Specifications
| Charging Case Weight (oz) | 1.8 |
|---|---|
| Earpiece Weight (oz) | 0.3 |
| Vægt (g) | 49.7 |
| Vægt (g) | 9.8 |
Control Connect Specifications
| Bluetooth-profiler | A2DP 1.3, AVRCP 1.5, HFP 1.7 |
|---|---|
| Bluetooth-frekvens | 2.402 GHz – 2.48 GHz |
| Bluetooth sender-modulation | GFSK, π/4DQPSK, 8DPSK |
| Bluetooth sender-effekt | 0 - 12dbm |
| Bluetooth-version | 5.0 |
Documents & Downloads
Gallery
What’s in the Box
- JBL Tune 225TWS Ghost Edition
- Type-C USB-opladningskabel
- Opladningsetui
- 1 x garanti/advarsler (W / !)
- 1 x Lynguide/sikkerhedsark (S / i)
FAQs & How-Tos
TWS Left & Right Not Pairing Together
The two earpieces of your TWS headphones should normally be connected together without issue. However, if they are no longer paired to each other, please follow these steps, in order.
- Forget/unpair the headphones on your device.
- Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
- Pair the headphones to your device and see if this resolves the problem.
- If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
- Initiate a Product Reset to reset the earbud’s Bluetooth connection.
- Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
- Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
- Manually pair the 2 buds together again, as you did in step 2. This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
- Pair the buds to your Source Device.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00