JBL Endurance Race 2

Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 

It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.

Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.

Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.

Repeat until the contact points are visibly clean, and charging should work as designed.

Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.

Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.

This headphone is supported by the My JBL Headphones App.

If the USB port gets too wet, the case will stop charging to avoid the temperature becoming too high.

If the USB port on the case detects liquid, you can see a white flash from the LED lighting bar.

"Sports Mode" enhances your work-out experience by adapting the ambient sound level and the EQ settings. This feature can be turned on in the JBL Headphones app. "Sports Mode" include outdoor walking, hiking, outdoor running, elliptical, indoor running and functional training.

When "Sports Mode" is turned on, the Ambient Sound Control and the assigned gestures will be temporarily disabled. Both Ambient Sound Control and the assigned gestures will be turned on again once "Sports Mode" is turned off.

"Relax Sound" is a feature in the JBL Headphones app, which let's you choose a peaceful sound, like gentle ocean waves or a crackling wood fire to listen to.

You can adjust a slider to select how long you want to listen to the relaxing sounds, and also select whether you want to listen to one or more of the sounds.