GRAND TOURING GTO 6428
4 inch x 6 inch 2-Way
Sold from 2009 until now
| Predecessor Product: | GRAND TOURING GTO 6427 |
|---|---|
| Successor Product: | GTO6429 |
| Made in: | China |
Getting started with your GRAND TOURING GTO 6428
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Series
- Grand Touring
- Type
- Two-Way
- Size
- 4 x 6
- MSRP U.S.
- $119.95 per pair
- Power Handling (RMS)
- 40W
- Nominal Impedance
- 2 ohms
- Sensitivity
- (2.83V@1m) 91dB
- Power Handling (Peak)
- 120W
- Frequency Response
- 75Hz–21kHz
- Mounting Depth (in)
- 1-3/4
- Mounting Depth (mm)
- 44
- Mounting Cutout Diameter (in)
- 5-3/4
- External Diameter (in)
- 6-5/16
- External Diameter (mm)
- 160
- Mounting Cutout Diameter (mm)
- 145
- Crossover Frequencies
- Onboard
- Low-Frequency Transducer
- PlusOne® HCL™ honeycomb-laminate cone
- Controls/Adjustments
- None
- High-Frequency Transducer
- 25mm (1") edge-driven My-Ti™ dome
4 inch x 6 inch two-way loudspeaker with Plus One® woofer cone and 1 inch edge-driven My-Ti™ tweeter. This product is perfect for dash location upgrades where a 4 inch x 6 inch speaker is required.
The JBL-only Plus One® woofer cone is exceptionally stiff and lightweight with up to 25 percent more active surface area than you’ll ever find on competing models of the same size. You get an audible boost in bass output and efficiency.
Listen loud. It’s a high-bandwidth, edge-driven dome tweeter with a large voice coil, like high-end home audio loudspeakers. The My-Ti™ construction (a proprietary Mylar-titanium composite) delivers great power handling. Extended high frequencies. And seamless integration with the woofer.
By using a built-in crossover network with advanced high and low pass filters, the GTO6428 creates a smooth transition between the woofer and tweeter. The result? Midrange vocals that sound so natural and lifelike, you’d think the artist was sitting in the passenger seat.
The GTO6428 is compatible with aftermarket head units and factory-installed systems. Designed as replacements for impotent factory-installed OEM speakers, the GTO6428 is easily installed without any special tools or modifications.
Low-Impedance, three ohm voice coils compensate for the undergauged speaker wiring found in many of today's cars, and make the most of every watt your amplifier or head unit can deliver.
This muscular speaker offers 120 watts of peak power handling. Hit the gas and have fun.
Doing it yourself? The GTO6428 easily installs into nearly any factory 4-inch by 6-inch location without any special tools or additional modifications. You'll be listening to your new JBL® speakers in no time at all.
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
