UA Sport Wireless Train – Engineered by JBL - Black - Wireless on-ear headphone built for the gym - Hero UA Sport Wireless Train – Engineered by JBL - Black - Wireless on-ear headphone built for the gym - Front UA Sport Wireless Train – Engineered by JBL - Black - Wireless on-ear headphone built for the gym - Detailshot 1
UA Sport Wireless Train – Engineered by JBL - Black - Wireless on-ear headphone built for the gym - Hero
  • UA Sport Wireless Train – Engineered by JBL - Black - Wireless on-ear headphone built for the gym - Swatch Image
  • UA Sport Wireless Train – Engineered by JBL - Black / Red - Wireless on-ear headphone built for the gym - Swatch Image

UA Sport Wireless Train – Engineered by JBL

Los UA Sport Wireless Train están diseñados para su uso en el gimnasio. Las almohadillas SuperVent mantienen el nivel de transpiración y el material de agarre Under Armour ofrece suavidad y una estabilidad inmejorable. Los auriculares UA Train elevan cada repetición con el gran JBL Charged Sound inalámbrico y el todo nuevo Bionic Hearing con la tecnología TalkThru. Con un simple toque sobre el logotipo UA, la tecnología TalkThru se activa para que puedas hablar con tu compañero de entrenamiento o tu entrenador sin tener que quitarte los auriculares. Los controles de gran tamaño son fácilmente accesibles durante una intensa sesión de entrenamiento, y la batería de 16 horas con carga rápida ofrece una hora de reproducción con solo cinco minutos de carga. Su durabilidad ha sido diseñada y probada por atletas. Son resistentes a la humedad y las almohadillas se pueden lavar a mano. Con UA Sport Wireless Train, podrás sacarle el máximo partido a tu entrenamiento.

Especificaciones del producto

Especificaciones generales

Material de la almohadilla del auricular UA breathe material
Driver (mm) 40

Especificaciones de sonido

Sensibilidad del driver a 1kHz1mW (dB) 101
Respuesta de frecuencia dinámica 16Hz - 20kHz
Impedancia de entrada (ohms) 32
Número de drivers por auricular 1

Dimensiones

Headphone cable length (cm) 125.0
Longitud del cable del auricular (pies) 4.1
Peso (g) 240.0
Peso (oz) 8.5

Especificaciones de conexión y control

Perfiles Bluetooth A2DP v1.3, AVRCP v1.5, HFP v1.6, HSP v1.2
Rango de frecuencia de transmisión Bluetooth 2.402GHz-2.48GHz
Transmisión de modulación GFSK vía Bluetooth GFSK,π/4DQPSK, 8DPSK
Potencia de transmisión Bluetooth <4 dbm
Versión Bluetooth 4.1
Consulta los documentos para ver las especificaciones en profundidad

Documentos y descargas

Fichas de especificaciones

Vídeos

Contenido de la caja

  • 1 AURICULAR
  • 1 FUNDA
  • 1 CABLE DE CARGA
  • 1 CABLE DE AUDIO
  • 1 GUÍA DE INICIACIÓN RÁPIDA
  • 1 HOJA DE SEGURIDAD
  • 1 TARJETA DE GARANTÍA
UA Sport Wireless Train – Engineered by JBL - What's in the Box

Preguntas frecuentes y procedimientos

UA Train Headphones: TalkThru Technology
Talk Thru technology allows you to clearly hear others for quick conversations without removing your UA Train headphones. To activate TalkThru mode, press the UA logo on the RIGHT ear for 1 second. You will hear your music level lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the UA logo again. (Please note TalkThru does not function when using cable connection.)
Can you activate SIRI on the UA Train headphones?
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.
How do you skip tracks on the UA train headphones?
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.
Do the UA Train headphones support AptX low latency?
No. UA Train does not support AptX™ and AptX HD™ audio codecs.
How do I know if the headphones are fully charged on the UA Train headphones?
As the headphones are charging, you will see a red solid light indicator at the bottom LEFT ear cup. Once the unit is fully charged, the red light will turn off.
UA Train Headphones: Charging Information
To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.
UA Train Headphones: Call Information
To receive a call, press the center button located in between the volume- and volume+ button for 1 second.
UA Train Headphones: Ear Pad Information
Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.
Does the US Train feature an audio cable?
Yes. The UA Train features a detachable audio cable with a one button remote. (Please note: you cannot use bluetooth or TalkThru when using the cable connection.)
Are the UA Train headphones waterproof?
UA Train features an IPX4 rating which offers protection from a splash of water in any direction for at least 5 minutes. They cannot be fully submerged in water.
How do you power on and pair the UA Train headphones?
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.

Registro del producto

¿Es dueño de este producto?
¡Regístralo aquí!

Register now

¿No encuentras lo que buscas?

Contacte con Nosotros

 

Live Chat (ícono en la esquina inferior derecha) 

Horario de Atención

De Lunes a Viernes: 08:00 a.m a 6:00 p.m
Sábados: 09:00 a.m a 12:00 p.m

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico