GX-A604
4 channels, full-range amplifier with electronic filter and variable Bass EQ on the back channels
Sold from 2013 until 2014
Getting started with your GX-A604
Quick Start Guide & Downloads
Product Specifications
- Number of Channels
- 4 channels
- Number Of Channels
- 4 Channels
- Amplifier Power (RMS)
- 4 ohm... 60W x 4, <1% THD+N
- Power Handling (peak)
- 435W
- Signal-to-Noise Ratio
- 93dB
- Frequency Response
- 20Hz – 20kHz
- Total Harmonic Distortion
- <1%
- Input Sensitivity
- 200mV-20V
- Variable Bass Boost
- 0 to + 12dB @ 45Hz
- MSRP U.S.
- $179.95 each
- Signal-to-Noise Ratio
- 93dB
- Total Peak Power Output
- 435W
- THD + N
- ;less than 1%
- Frequency Response
- 20Hz-20kHz
- Input Sensitivity
- 20mV-20V
- Bridged Power Output
- 170W x 2 into 4 ohms
- 4-Ohm Power Output
- 60 Watts RMS x 4 channels
- Variable Bass Boost
- 0 to + 12dB @45Hz
- 2-Ohm Power Output
- 85 Watts RMS x 4 channels
- Width (in)
- 8-1/8
- Depth (mm)
- 300
- Height (mm)
- 52
- Depth (in)
- 11-13/16
- Width (mm)
- 206
- Height (in)
- 2-1/16
- Dimensions (H x W x D)
- 2-1/16 inch x 8-1/8 inch x 11-13/16 inch (52mm x 206mm x 300mm)
Powerful and Compact 435-Watt Amplifier
A 435-watt, four-channel, full-range powerhouse, the GX-A604 – with on-board variable electronic crossovers and variable Bass EQ on the rear channels – is certainly a versatile system building tool. With all that power inside a 2-1/16" (52mm) high, 8-1/8" (206mm) wide and 11 13/16" (300mm) deep package, the GX-A604 is easy to install yet can serve as the foundation of a truly sophisticated sound system. Features include a cast-aluminum heat sink, built-in electronic crossover networks and bass boos circuits. With almost seven decades of experience in bringing live music to life, JBL® has adapted many of our professional technologies for use in our car audio systems, transforming your road-going listening experience with new levels of power and clarity. Whether you’re looking at dramatically improving the sound of your factory installed audio system or designing a world-class competitive sound system from the chassis up, your JBL car audio retailer has everything you’re looking for. Crank up both the volume and the fidelity of your factory-installed sound system with the new GX Series amplifiers. Ranging from a compact stereo amplifier with enough power to drive the most demanding speaker systems, to the thunderous GX-A3001 with well over 400 watts of raw bass power to shake the ground, GX amplifiers cover the range at surprisingly affordable prices. There’s nothing wrong with your existing audio system that real power can’t fix, and GX series amps make adding that power easy. Setting up a sound system to fill your car takes not only great gear, but the ability to make all the components work together as an integrated whole. On board active crossovers and separate line- and speaker-level inputs make it easy to tie the new GX amps to the rest of your system, and carefully engineered Bass Boost circuits make it easy to get the sound you crave, whether you’re upgrading a factory system or building from scratch. For years, JBL’s engineers have made the gear that experts have relied on. Now, we also make gear that helps you perform like an expert.
FAQs & How-Tos
-
The amplifier has a signal sensor on the high-level (speaker level) inputs, so it is not necessary to use a trigger cable when input is high-level, and connected to the high-level inputs. However, low-level input signals through the RCA-phone input sockets do not activate a signal sensor, so use of a trigger cable is MANDATORY for low-level input signal use.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)