Loft 50

Loft 50

250-watt, triple 4" dual 6-1/2", side-firing tower speakers

Sold from 2012 until now

Documents & Downloads

Product Specifications

Type
Floorstanding
Frequency Response
37Hz-20kHz
Sensitivity
(2.83V @1m) 91 dB
Power Handling (Recommended)
10-250 watts
Nominal Impedance
8 Ohm
Depth (in)
11-7/8
Height (in)
42-1/2
Width (mm)
180
Weight (kg)
12.5
Depth (mm)
300
Height (mm)
1078
Connector Type
Binding Post
High-Frequncy Transducer
25mm soft-dome with EOS waveguide
Midrange Transducer
Three 100mm PolyPlas
Low-Frequency Transducer
Two 165mm PolyPlas cones

Elegant tower speakers with three 4" (100mm) midrange drivers and dual 6-1/2" (165mm) woofers.

For those with a discerning eye for contemporary style and an ear for detailed sound, the JBL® Loft Series is the perfect speaker set. The series’ Loft50 is a pair of tower speakers that we’ve designed to reproduce your audio with incredible highs and lows. Their dual 6-1/2-inch (165-millimeter), side-firing PolyBass woofers allow each speaker to produce thunderous, floor-rattling bass; the midrange frequencies, where departures from faithful reproduction are most noticeable, come from three 4-inch (100-millimeter) PolyBass drivers; the highs come through crisp and clear at frequencies up to 30kHz with a 1-inch (25-millimeter) soft-dome tweeter that we’ve placed at ear level. We’ve equipped the tweeter with our proprietary Elliptical Oblate Spheroidal™ (EOS) waveguide technology, which creates a wide, consistent listening window, making every seat the best in the house. Finally, the Loft50 speakers use a Straight-Line Signal Path (SSP) design to help ensure that a strong, precise signal arrives at each driver with little alteration from the original source. Not only do the speakers sound stunningly good, but their unique design meets the needs of anyone looking for space-saving audio components. These speakers are unlike any you may have experienced.

JBL engineers designed the Loft50 tower speakers to produce precise, exceptional sound from a receiver or amplifier capable of delivering up to 250 watts.
Paper produces the most natural sound of all driver materials. We’ve reinforced the Loft50’s paper woofer cones with a proprietary polymer that provides additional stiffness and damping to the cone surface. These qualities provide the listener with tight bass and extended low frequencies without breakup or distortion.
The Loft50’s tweeter features a 1-inch (25-millimeter) soft dome with high sensitivity and fast transient response for accurate high-frequency reproduction. The tweeter integrates with an EOS (Elliptical Oblate Spheroidal) waveguide, giving high-frequency sounds a wide, consistent listening window. The result is an incredibly broad stereo image across a huge listening area.
A rear-firing FreeFlow™ port is acoustically matched to the Loft50’s woofer to move air out of the speaker’s cabinet. You’ll get extended bass response with low distortion, adding power to your music and excitement to your movie soundtracks.
The ideal path from input to components to transducers is a straight line. The Loft50 takes that path. Its Straight-Line Signal Path (SSP) technology preserves the clarity, detail and dynamics of your favorite audio content.
The Loft50 doesn’t over-emphasize or under-emphasize any sounds. With a frequency response of 37Hz − 20kHz, it reproduces a true, full sound range from deep bass tones to ultrahigh frequencies.

Can’t find what you’re looking for?

Call us

Call us

Call Us now at: 877-457-2592

Monday - Friday 8:30 a.m. - 5:30 p.m. (ET)

E-mail us

E-mail us

We are here Monday – Friday to answer you as fast as we can!

Email us