ES100

ES100

300-watt, dual 10” floorstanding speaker

Verkocht vanaf 2007 tot 2008

Beknopte handleiding & Downloads

Product Specificaties

Type
Floor-Standing Speakers
Finish
Black
UHF Transducer
3/4" (19mm) Polyester-film ring radiator, shielded; EOS waveguide
Frequency Response
32Hz-40kHz
Crossover Frequencies
450Hz, 3000Hz - 24dB/octave
Nominal Impedance
8 ohms
Maximum Recommended Amplifier Power
250W
Power Handling (Peak)
500W
Sensitivity
(2.83V@1m) 91dB
Power Handling (RMS)
125W
Height (mm)
1149
Height (in)
45-1/4
Weight (kg)
29
Weight (lb)
63.9
Width (mm)
305
Depth (mm)
422
Depth (in)
16-5/8
Width (in)
12
Low-Frequency Transducer
Dual 10" (250mm) PolyPlas,™ shielded
Midrange Transducer
4" (100mm) PolyPlas, shielded
High-Frequncy Transducer
3/4" (19mm) Polyester-film ring-radiator, shielded; EOS waveguide
Ultra High Frequency Transducer
3/4" (19mm) Polyester-film ring-radiator, shielded;EOS waveguide

Powerful floorstanding speaker designed to deliver high-definition sound.

High-definition audio formats, such as DVD and HDTV, demand high-definition sound. And the ES100 isn’t shy to deliver. Responding with the same technical prowess that’s used in concert halls, movie theaters and recording studios, JBL engineers have developed the ES Series of HD loudspeakers. And one of these shining stars is the ES100. Its dual ten-inch (250-millimeter) PolyPlas™ woofers generate hyper-realistic, deep, resonant bass and its 4-inch (100-millimeter) PolyPlas midrange transducer clearly reproduces the human voice. A 3/4-inch (19-millimeter) titanium-laminate dome tweeter uses a proprietary Elliptical Oblate Spheroidal™ (EOS) waveguide to direct high-frequency sounds over a wide listening area – making every seat the best in your home theater. And its 3/4-inch (19-millimeter) polyester-film, ring-radiator ultrahigh-frequency transducer, which also has an EOS waveguide, can reproduce frequencies up to 40kHz, well above the limits of human hearing. Boasting an impressive 500 watts of peak power handling (and 125 RMS) you can pretty much crank this baby us as loud as you’d like – in stereo or multichannel. But more than providing your home with breathtaking sound, the ES100 is designed to grace any space with its elegant look is just as stunning as the technology inside.

JBL engineers designed the ES100 loudspeaker to deliver enhanced, room-filling sound from a compatible AVR (audio/video receiver) or 25- to 500-watt power amplifier.
Stiff, lightweight PolyPlas material gives great bass response. But the ES100 speaker has other advantages as well. Its driver and rubber surround create a seamless sound field and minimize distortion, even at high volumes. Together, these materials and devices give you an unmatched audio experience.
The midrange frequencies, where vocals are reproduced, are the heart and soul of great audio. They’re also the area where departures from faithful reproduction are the most noticeable. Since the ES100’s midrange driver uses PolyPlas material, which reproduces vocals with incredible accuracy, the voices that you hear from this speaker come out clear and true – just as the artist and engineer intended.
The ES100’s proprietary Elliptical Oblate Spheroidal (EOS) waveguide technology improves the sonic response of your listening environment. You get ideally balanced music, crisp dialogue and smooth audio distribution throughout the listening space. As a result, every seat is the best seat in your home theater.
The ES100’s extremely thin but rigid titanium-laminate dome delivers accurate, undistorted high-frequency response, even when the volume is way up. The end result is full, clear, tight reproduction of high frequencies.
The ideal path from input to components to transducers is a straight line. The ES100 takes the shortest path possible, thanks to its Straight-Line Signal Path™ design. As a result, the speaker preserves the clarity, detail and dynamics of any audio content that it plays.
The ES100’s computer-optimized bass-reflex port extends deep bass response and eliminates unwanted turbulence. You’ll hear low frequencies with complete clarity and minimal noise.
The muscular ES100 offers 125 watts of continuous power handling and 500 watts of peak power, a crossover frequency of 450Hz at 24dB/octave, and 91dB sensitivity. You’ll be just as impressed with it as we are.
The ES100 never over- or under-emphasizes any part of the signals that it receives. With a frequency response of 32Hz – 40kHz, the speaker reproduces a true, full sound range from deep bass tones to ultrahigh frequencies.
You can place the JBL ES100 anywhere in your listening room without worrying that it’ll interfere with your TV picture. It’s magnetically shielded to prevent such distortion, no matter where you place it.

Kan je niet vinden wat je zoekt?

Bel onze support-afdeling

Bel onze support-afdeling

Bel ons nu op: +32 (0) 28080136

Maandag - Vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00

Stuur een email aan onze support-afdeling

Stuur een email aan onze support-afdeling

We zijn er van maandag t/m zondag om je vragen zo snel mogelijk te beantwoorden!

Stuur ons een email
Chat met onze support-afdeling

Chat met onze support-afdeling

Chat is open op werkdagen tussen 09:00 en 18:00 en van 10:00 - 16:00 in het weekend.

message

WhatsApp Ons

Stuur ons een bericht hier 

Maandag - vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00