JBL CBT 100LA-1

JBL CBT 100LA-1

Constant Beamwidth Technology™ Line Array Column Loudspeaker

Aan de slag met uw JBL CBT 100LA-1

Aan de slag met uw JBL CBT 100LA-1

Quick Start Guide

Ga in een mum van tijd aan de slag met onze eenvoudig te volgen beknopte handleiding

Product Registration

Registreer uw product

Bent u eigenaar van dit product? Registreer het hier! En claim eenvoudig uw garantie of service

Registreer nu

Downloads

Product Specificaties

Components
Sixteen 50 mm (2 in) Full-Range
Frequency Range (-10 dB)
80 Hz – 20 kHz
Vertical Coverage (Vertical Narrow Mode)
15° (2 kHz - 16 kHz) (±10°)
Vertical Coverage (Vertical Broad Mode)
40° (1 kHz - 16 kHz) (±10°)
Vertical Coverage (Horizontal)
150° (ave, 1 kHz – 4 kHz, ±20°)
Sensitivity (2.83V@ 1m) Narrow
(speech mode) 96 dB (2 kHz - 14 kHz ) ; (music mode) 93 dB (300 Hz - 18 kHz)
Sensitivity (2.83V@ 1m) Broad
(speech mode) 93 dB (2 kHz - 14 kHz) ; (music mode) 90 dB (300 Hz - 18 kHz)
Nominal Impedance
8 ohms (in Thru mode)
Power Capacity (8 ohm setting)
325 W (1300W peak), 2 hrs ; 200 W (800W peak), 100 hrs
Max SPL Narrow
(speech mode) 121 dB cont ave (127 peak) ; (music mode) 118 dB cont ave (124 peak)
Max SPL Broad
(speech mode) 118 dB cont ave (124 peak) ; (music mode) 115 dB cont ave (121 peak)
70V/100V Transformer Taps
120W, 60W, 30W (15W at 70V only), and 8Ω thru, via switch
Outdoor Capability
IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
Insert Points
18 M6 insert points on back panel.
Mounting
Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
Included Accessories
Swivel (pan) / tilt wall bracket
Optional Accessories
MTC-PC2 terminal panel cover ; MTC-CBT-FM1 flush-mount low-profile wall-mount bracket ; MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand
Height
1000 mm (39.4 in)
Width
98.5 mm (3.8 in)
Depth
153 mm (6.0 in)
Net Weight
7.2 kg (15.8 lb)
Enclosure
Fiberglass reinforced ABS cabinet, painted aluminum grille

Constant Beamwidth Technology™ Line Array Column Loudspeaker

The CBT 100LA-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers. The slim, compact design fits well into virtually any architectural decor. The 100 cm (39.4 in) tall line array height provides consistent pattern control throughout the intelligibility band, making the CBT 100LA-1 ideal for difficult acoustic environments. The combination of superior sound quality, excellent pattern control, and compact design makes CBT 100LA-1 ideal for applications such as lecture halls, transit centers, conference rooms, cathedrals, multipurpose spaces, architectural spaces, and in-wall recessed locations, among many others. The innovative coverage adjustability allows switching between broad and narrow vertical coverage settings to allow matching the coverage and throw requirements of the application. Coverage can be easily switched in-venue with the speaker already installed. This innovation allows a single loudspeaker model to excel in an extremely wide variety of project types. The voicing can be set to match the application through the Music/Speech switch. The Music setting provides flat frequency response, while the Speech setting produces a mid-range presence boost to provide clear, intelligible speech even at the longest throw distances. The drivers feature dual neodymium magnets for light weight. Copper capped pole pieces lower both the driver inductance and the flux modulation, resulting in increased high frequency extension and reduced distortion at high drive levels. Butyl rubber surroundsprovide long life even in high humidity environments. The drivers are shielded. Dynamic SonicGuard™ minimizes distortion at high drive levels by limiting low frequency excursion dynamically. This maximizes clarity at high drive levels while protecting the drivers from damage due to overpowering. A swivel (pan)/tilt wall-mount bracket is included, plus eighteen M6 inserts on the back panel fit the spacing of common third-party mounting brackets, or can be utilized to suspend the speaker using forged shoulder steel eyebolts, providing installation versatility. CBT 100LA-1 can be installed either indoors or outdoors. The drivers are weather-treated, the fiberglass reinforced ABS cabinet is excellent for outdoor applications, external screws are stainless steel screws, and the painted aluminum grille resists rusting in the harshest conditions.

Provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
Switchable between 40° for medium-throw coverage and 15° for long-throw applications
Provides flat response in music mode or mid-range presence peak in speech mode
Maximizes clarity at high drive levels while protecting the drivers from damage due to overpowering
Fits well into virtually any architectural decor

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: +32 (0) 28080136

Maandag - Vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Chat is open op werkdagen tussen 09:00 en 18:00 en van 10:00 - 16:00 in het weekend.

message

WhatsApp Ons

Stuur ons een bericht hier 

Maandag - vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00