MS-8
240-watt, powered DSP-based, car audio upgrade solution
Verkocht vanaf 2010 tot nu
| Gemaakt in: | China |
|---|
Beknopte handleiding & Downloads
Product Specificaties
- Type
- System Integration Digital Processor
- Power Output
- 20W x 8 channels @ 4 ohms, 30W x 8 channels @ 2 ohms
- Series
- MS Series
- Number of Output Channels
- Up to 8
- Maximum Input Voltage (Speaker-Level Input)
- 15V
- DSP Time Correction
- Yes
- Output Connections
- 8 x line-level; 8 x speaker-level
- Signal-to-Noise Ratio
- (Line-in>Line-out) 90 (Line-in>Speaker-out) 85
- Number of Input Channels
- Up to 8
- Built-In Amplification
- Yes
- Electronic Crossover Functions
- DSP, up to 8 outputs, 6dB/12dB/18dB/24dB/octave
- Seating Position Optimization
- Driver, front passenger, front area, rear area
- 31-Band Graphic Equalizer
- Yes
- Tone Controls
- Bass, Mid, Treble
- DSP Equalization
- Yes
- Maximum Output Voltage (Line Output)
- 2.8V
- Frequency Response
- 20Hz–20kHz
- Input Signal Conditioning
- Yes
- Maximum Input Voltage (Line Input)
- 2.8V
- Display Width (in)
- 3-3/8
- Weight Display Unit (oz)
- 2.8
- Main Height (mm)
- 55
- Display Depth (mm)
- 62
- Weight Remote Control (oz)
- 1.4
- Weight Main Unit (kg)
- 2.9
- Display Width (mm)
- 86
- Weight Remote Control (g)
- 40
- Weight Display Unit (g)
- 80
- Display Height (mm)
- 79
- Main Depth (mm)
- 293
- Main Height ( in)
- 2-1/8
- Display Depth (in)
- 2-7/16
- Display Height (in)
- 3-1/8
- Main Width (mm)
- 187
- Weight Main Unit (lb)
- 6.4
- Main Depth (in)
- 11-1/2
- Display
- 128 x 64 pixel LCD
It’s revolutionary – and your car’s sound system will never be the same.
The JBL® MS-8 system integration digital processor is a giant leap forward in the pursuit of making upgrades to car audio systems easy. No longer does getting great sound in today’s cars have to be labor-intensive and complicated. This elegant, single-chassis solution, based on digital signal processing (DSP), tastefully integrates with both factory-installed and aftermarket audio systems. It provides both speaker and pre-amp level inputs (up to eight channels to mix and match). Its powerful, menu-driven configuration allows the sophisticated DSP to learn your vehicle’s audio-signal characteristics and acoustic response, and provide a fast and highly effective automated setup that includes Logic 7® audio processing. What’s more, it can analyze and save multiple listening positions. Once it completes making acoustic and signal corrections, it adds precision active crossovers, a 31-band (1/3-octave) equalizer and other user-accessible features for easy adjustment. The unit has its own onboard eight-channel power for connection directly to speakers or pre-amp level outputs to connect more powerful outboard amplifiers. What used to take professional-installation technicians hours of tuning and tweaking now occurs in a matter of minutes.
The JBL MS-8 handles all the necessary tasks for dramatically improving the sound in any vehicle with an audio system. It’s got the power of a digital signal processor (DSP) engine to optimize the signals and settings for any in-vehicle listening environment, whether new or old. Logic 7 matrix processing elevates the listening experience of any two-channel source material, and onboard power allows direct connection to existing speakers. It’s a true solution.
Configuring your MS-8 unit takes less than 10 minutes. An included setup CD contains the signals required to analyze the inputs when you use the unit as an OEM (original-equipment manufacturer) integration device. If you connect the unit to an aftermarket product, the unit bypasses the signal-analysis portion. The unit’s on-screen menu provides comprehensive, step-by-step instructions for system configuration.
All of the MS-8 unit’s configurations require the user to wear the included on-ear binaural microphones for the initial setup. The unit collects data on up to four listening positions and subsequently provides an optimized setting for each location. This is one of the key reasons why the unit is such a breeze to use.
Many of today’s OEM audio systems use multiple, bandwidth-limited active channels from the factory-installed amplifier. The MS-8 unit’s inputs can connect to all the necessary channels from the factory system and sum them together to achieve a full-range, 20Hz – 20kHz response. As long as the unit’s summing channels can assemble a full-range signal, the rest of its built-in technology will take it from there.
Once your MS-8 unit sums and analyzes your OEM audio signal, the unit’s DSP algorithms implement a correction routine that resets the frequency response to a target curve for an initial output response. In addition to correcting a frequency-response curve, the unit also strips away the time delay from any of its OEM audio-signal inputs.
Once the MS-8 unit achieves all initial setup and target curves, it offers a powerful and precise range of signal-processing functions and filters, including configurable active crossovers on all channels and a 31-band (1/3-octave) graphic equalizer. As a result, the unit gives the user a high degree of audio adjustment and complete confidence in the settings remaining intact regardless of source material, output levels or other user adjustments.
Logic 7 matrix processing is widely regarded as the reference standard for making a realistic 5.1- or 7.1-channel surround experience from two-channel source material. Your MS-8 unit uses Logic 7 processing to make upgraded audio systems sound great. When enabled, Logic 7 technology provides an in-vehicle experience that no other aftermarket signal processors come close to matching. It’s yet another reason why the unit is a very effective upgrade solution for any car’s audio system.
With the power of a precision DSP engine, it’s easy for the MS-8 unit to optimize the listening experience for one or more seated positions in your car. During system configuration, the unit can measure multiple seats and balance the audio output between two positions (or among everyone in the car), or simply store the measurements for later use. By optimizing each listening position, the unit always makes sure that you’re listening from the best seat.
The MS-8 unit features five favorite memory presets. Since the unit retains all individual audio, listening-position and level settings in each profile, you can easily switch among the five favorites and experience optimized seating positions, frequency-response characteristics or other attributes at the touch of a button.
One of the MS-8’s most useful features for an audio-system upgrade is its onboard IC (integrated-circuit) power amplifier. The unit delivers up to 18 watts RMS into 4 ohms (30 watts RMS into 2 ohms) across each of its eight channels for a maximum of 240 watts RMS. The onboard power is ideal for existing factory speakers where overall sound in the car is loud enough but just doesn’t sound that great.
Your MS-8 unit offers eight fully assignable pre-amp level outputs for virtually unlimited system-configuration possibilities in a large audio-system footprint. By combining the unit’s active crossovers to a channel assignment, you can configure front/rear/sub/center systems or fully active, three-way front/center/subwoofer systems with precision and ease.
Your MS-8 unit features a five-line, 128x64-pixel LCD screen to provide easy viewing of the configuration and menu adjustment. You can navigate the menu functions with the included RF (radio-frequency) remote control. The LCD screen is easy to install; and, because of its small size, you can place it virtually anywhere that’s convenient for the driver.
Your MS-8 unit has a traditional, wired remote turn-on that responds to any +4VDC (volts direct-current) or greater analog trigger signal, which makes it ideal for many of today’s low-voltage factory amplifier triggers. While many systems still provide a standard +12VDC amplifier turn-on trigger, newer OEM systems often use lower-voltage triggers. Where no viable analog turn-on signal is available, you can connect the unit to your car’s +12VDC accessory terminal.
Your MS-8 unit is configured as the primary control for your audio system’s turn-on signal to all other amplifiers in an audio system – either the amps that follow the unit in the signal path (aftermarket amplifiers) or an OEM amplifier that is feeding its inputs. To that end, the processor provides a dedicated remote out terminal (+12VDC@1A) to drive the turn-on circuit of any outboard amplifier. These configurations help eliminate audible clicks and pops when the audio system turns on and off.
The MS-8 unit features a pre-amp level AUX (auxiliary) input for easy connection to additional signal sources, such as portable media players, tablets, video-game systems or any other source with RCA audio outputs. The input is easily switched from the main menu and includes its own bass/mid/treble controls and relative level control.
Afbeeldingen en video's
Kan je niet vinden wat je zoekt?
Bel onze support-afdeling
Bel ons nu op:
+32 (0) 28080136
Maandag - Vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00
Stuur een email aan onze support-afdeling
We zijn er van maandag t/m zondag om je vragen zo snel mogelijk te beantwoorden!
Stuur ons een email
Chat met onze support-afdeling
Chat is open op werkdagen tussen 09:00 en 18:00 en van 10:00 - 16:00 in het weekend.
WhatsApp Ons
Stuur ons een bericht hier
Maandag - vrijdag: 09.00-18.00Zaterdag - Zondag: 10:00-16:00