JBL Partybox 310

JBL Partybox 310

Portable party speaker with dazzling lights and powerful JBL Pro Sound

Sold from 2021 until now

Getting started with your JBL Partybox 310

Getting started with your JBL Partybox 310

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Output power (W)
240
Dynamic frequency response range (Hz)
45 Hz - 20 KHz (-6 dB)
Dimensions (cm)
32.6 x 68.8 x 36.8
Dimensions (in)
27 x 12.8 x 14.5
Weight (kgs)
17.42
Weight (lbs)
38.4
Bluetooth profiles
A2DP 1.3, AVRCP 1.6
Bluetooth frequency
2.4 – 2.48GHz
Bluetooth transmitted modulation
GFSK, π/4 DQPSK, 8DPSK
Bluetooth transmitter power
15dBm (EIRP)
Bluetooth version
5.1
Charging time (hrs)
3.5
Maximum music playing time (hrs)
18
3.5 mm audio cable Input
Yes
Bluetooth
Yes
Charging cable
Yes
Karaoke function
Yes
Lightshow
Yes
Splashproof
Yes
Wireless
Yes
Rechargable battery
Yes
True Wireless
Yes
IP Code
IPx4
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Features, specifications and appearance are subject to change without notice.

Incredible JBL Sound with a Dazzling Light Show

Huge sound, dazzling lights and unbelievable power set this speaker apart from the crowd. The JBL PartyBox 310 packs a full party into a transportable, splashproof sound machine like no other. Turn up your favorite playlists anywhere, from get-togethers at home to dance parties on the beach. Bring big party vibes with 240 watts of JBL Pro Sound and a synced light show that grooves to the beat. Plug in and keep the fun going all night or wheel over to the campfire and take advantage of its impressive 18-hour battery life. Start a party with the JBL PartyBox 310.

Around the block or across the beach, make your party heard with 240 watts of big JBL Pro Sound. Sing, rap, strum — then turn up the bass and watch the dance floor come alive.
Mesmerize your crowd with a dazzling, dynamic light show that dances to the beat. With subtle pulsing and powerful strobing effects, there's a setting for every vibe.
Go from the opening act till way past sunrise with up to 18 hours of music-blasting battery life. Want to party longer? Just plug the JBL PartyBox 310 into an outlet and dance the weekend away.
Who says only clubs have big sound? With a telescopic handle and built-in smooth-glide wheels, you can take the party from your patio to the park — and everywhere in between.
Take it from a backyard dance party to a poolside bash. Crafted with IPX4 splashproof protection, the JBL PartyBox 310 keeps the music going —rain or shine.
Connect compatible speakers wirelessly via TWS (True Wireless Stereo using Bluetooth connection up to 2 party speakers) or wired via one Aux output to another.
Have even more fun with party sound effects that are impossible to ignore. Choose an air-horn, applause — even a "boo" — to get your guests cheering and laughing along.
The party doesn't stop when the sun goes down. The control panel on JBL PartyBox 310 has convenient built-in backlighting that activates in the dark. You'll be able to keep the tunes going, with no need for a flashlight.
From the DJ booth to the chill-out area under the trees, control your party from your phone with the PartyBox app. Switch tracks, change up the light show, control karaoke features and more, all with a just a few taps and swipes.
Take your party up a notch — literally. The JBL PartyBox 310 is compatible with most speaker stands, so you can raise it off the ground for more visibility and even better sound. (Speaker stand not included).
It's your time to shine. Dual mic and guitar inputs turn any party into a karaoke party, while built-in vocal tuning makes your voice sound straight-up amazing.
Songs. Playlists. DJ mixes. Play whatever you want, whenever you want, from your smart phone or other Bluetooth-enabled device. All you need is the music — and the desire to play it loud.
Hear your favorite songs without having to make a request. Just pop your playlist on a thumb drive and plug it into the built-in USB port to play the tunes you love without the effort.
From backyard bashes to warehouse throwdowns, the PartyBox 310 plugs in wherever you have an outlet. Taking your party on the road? Hook it up to your car, RV, or party bus to keep the vibe going as long as your crowd can keep dancing.

FAQs & How-Tos

9 results
  • It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )
  • Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
  • Finding the software version

    1. Press and hold the 'Volume-' and 'Bass Boost' buttons for 5 seconds.
    2. A voice will start prompting numbers which indicates the current software version.
    PBFW_Announce.png
  • USB Stick

    1. Get an empty USB str stick with speed of 2.0.
    2. Make sure it is formatted with FAT16 or FAT32.
    3. Your Music files can only be: MP3 (32-320kbit/s), WMA(32-320kbit/s) and wAV(44.1K/48K/192K).
    4. The Partybox supports up to 8 subfolders.
    5. It will be played in alphabetic sequence with main folders first then subfolders.
    6. To skip songs forward, double press the Play/Pause button. To skip back, triple press the Play/Pause button.
  • Resetting the Partybox to Factory Settings

    1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
    2. The JBL Partybox will power off and back on and is now reset.
  • This model is supported by the JBL Partybox App.
    Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:

    SETTINGS: OTA update | Firmware Version | Quick Start Guide

    REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off

    LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode

    GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode
  • It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.

    PartyBox On-The-Go/100:
    Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).

    PartyBox 200/300/1000:
    A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
    In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.
    PBTWS1new.png
    Partybox 110/310/710/Encore/Essential:
    Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).
    PBTWS2.png
    TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
    Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.

    Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310, 710 or Encore/Essential together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.
  • You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
  • Connecting a USB stick

    1. You can enjoy music from your USB Stick directly into the Partybox device.
    2. Insert the USB stick Stick into theUSB portport, located on the back of your Partybox.
    3. The USB Stick has to be formatted FAT16 or FAT 32 and supports MP3, WAVE and WMA Music files.
    4. It will start automatically playing the content on your USB stick.
    USB co

    AUX Connection

    1. You can connect any devices through the analog connection AUX
    2. Use an analog cable (Not included in the box) and connect your device.
    3. Press play on your external device and enjoy the music!
    analog

    RCA Connection (*Partybox 200/300/1000 Only)

    1. The Partybox features both Input and Output RCA connection.
    2. Connect your RCA cable (not included) to either one of the ports.
    3. You can use it with your DVD/BlueRay player or AVR system.
    User-added image

    Guitar and Microphone

    1. Connect your microphoneto the dedicated MIC iocn port or connect your electric Guitar  to the Guitar icon
    2. You can mix sound or make your own karaoke party with your Partybox.
    3. Sing or play through your devices.
      1. To adjust the volume of the audio source, press volume+ or volume- buttons.
      2. To adjust the volume of the microphone or guitar, rotate the Mic knob or guitar knob
    mic and
     

    Charging external devices

    1. Whenever your mobile device needs some extra power, the Partybox can help you!
    2. Featuring a USB Charging port for both Music (USB on a stick) or when you need to charge your Phone charging device.
    3. Simply connect your device to the usb portaport and start charging.
      1. NOTE: The Partybox 200 needs to be connected to AC power all the time to charge or function as a speaker.
      2. The Party 300/310 has a battery and can charge any device without needing AC power (unless the product's battery is depleted then you need to recharge via AC power).
    Charging devices

    There are many ways to enjoy your JBL Partybox On-The-Go, 100, 200, 300, 310 & 1000. The options are endless and you are in control of the party

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +61 291510376

Mon-Fri 8:00 AM to 5:00 PM (AEST)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon-Fri 8:00 AM to 5:00 PM (AEST)