How To
How To
450 results
-
Yes, the microphone allows you to skip tracks and control volume. To skip tracks forward, press and hold the volume + for 3 seconds. To skip tracks backward, press and hold the volume - for 3 seconds.Was this helpful? Thank you for your feedback!
-
Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. And the default setting of the mic monitoring is set of “OFF”. Was this helpful? Thank you for your feedback! -
Yes, the volume control buttons are located on the LEFT arm of the neckband.Was this helpful? Thank you for your feedback!
-
Yes, Soundgear supports aptX LL (Low Latency). (aptX is a way of packing more information into a compressed version of a signal).Was this helpful? Thank you for your feedback!
-
Yes, the T110BT features a three button inline microphone which allows you to pause/play skip tracks, answer calls and control the volume.Was this helpful? Thank you for your feedback!
-
Yes, the T205 features a one button universal microphone that gives you the ability to pause/play, answer/hang up calls, and skip tracks.Was this helpful? Thank you for your feedback!
-
No. Because it features a one button universal microphone, it does not give you the ability to control the volume.Was this helpful? Thank you for your feedback!
-
Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.Was this helpful? Thank you for your feedback!
-
Yes. You have the ability to control the volume which is located on the RIGHT arm of the neckband.Was this helpful? Thank you for your feedback!
-
Yes. The UA Train features a detachable audio cable with a one button remote. (Please note: you cannot use bluetooth or TalkThru when using the cable connection.)Was this helpful? Thank you for your feedback!
-
The JBL Quantum 200 is not equipped with JBL QuantumSURROUND. You can consider to purchase the Quantum 300, which comes with a USB dongle and access to JBL QuantumENGINE.
Was this helpful? Thank you for your feedback! -
The JBL Quantum 100 is not equipped with JBL QuantumSURROUND. You can consider to purchase the JBL Quantum 300, which comes with a USB dongle and access to JBL QuantumENGINE.Was this helpful? Thank you for your feedback!
-
This speaker does not have an Aux Input, so no analog connection is possible.Was this helpful? Thank you for your feedback!
-
Yes, it is needed to close the USB cap completely for waterproof.Was this helpful? Thank you for your feedback!
-
JBL Club headphones do not support aptX. There are a number of different platforms available and our choice was driven by the one that provides the combination of best sound quality and user experience. The platform that we have selected perfectly fits the requirements of the JBL Club series including voice integration and audio customization whilst supplying the Hi Res-certified headphones with the quality of audio they deserve.Was this helpful? Thank you for your feedback!
-
Sorry, neither AAC nor aptX are supported.Was this helpful? Thank you for your feedback!
-
No, the IP waterproof specification means that these speakers can be immersed in water 1 m deep for 30 minutes. It does not mean that they can float, so please be careful. If dropped, they will sink to the bottom.Was this helpful? Thank you for your feedback!
-
No. UA Train does not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
Demo mode
- Press the Play and Boost button at the same time for 5 seconds.
- Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
- NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
Was this helpful? Thank you for your feedback! -
Here is how to add music to the Dive Headphones: 1. Place the MP3 music files that you want to transfer to the Dive headphones on your computer, where you can find them again. The sequence is not important, they will be played in alphanumerical sequence. If you want to have a special sequence to your tracks, you can add a number as the first file name. 2. Connect the Dive to your computer with the USB cable. Please use the cable that came with the headphones, since other USB cables may be wired for charging only, and may not work. 3. Your Dive will now pop up in your explorer folder overview as a new drive. Total capacity is about 991 MB. 4. Now you simply drag-and-drop the MP3 files from their location onto the Dive, or you mark the files, copy them and paste them onto the Dive. Do not use folders of any kind, and do not try to place other file types on the Dive's memory. MP3 files with a resolution of 320 kbits/second is maximum quality possible. Please note that the owner's manual contains an error about random play, stating that MP3 play will always be done in random sequence. Unfortunately, this is an error. All replay of MP3 files from the internal memory is alphanumerical, NOT random. As mentioned above, you can add a number to the track title, and the tracks will be played in numerical order, until no more numbers are present, after which replay is in alphabetical order.Was this helpful? Thank you for your feedback!
-
The Endurance headphones do not support Apt X or AAC audio codecs.Was this helpful? Thank you for your feedback!
-
Fully charge the earbuds along with the charging case before the first use. The charging case is for charging the earbuds only. LED behaviors: 1 LED- 25% 2 LED-25%-50% 3 LED-50%-75% 4 LED-75%-99% NO LED-100% Fully Charged You can keep the earbuds in standby mode for up to 3 hours without having to return them to the case. beyond this point the earbuds must be returned to the case for charging. You should receive up to 4 hours of playback with additional 24 hours of backup power from the charging case.Was this helpful? Thank you for your feedback!
-
To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.Was this helpful? Thank you for your feedback!
-
In order to adjust your EQ settings you must follow these instructions: In your Windows 10 taskbar, right click on the volume icon. It should bring up your selected output device. If “Speakers (JBL Quantum *model* Game)” is not selected, please proceed to the next step.
In the upper right hand corner, select the arrow. This will display a list of output devices on your PC. Please select “Speakers (JBL Quantum *model* Game)” After selecting 'speakers' you will now be able to adjust your EQ settings to your preference.
Was this helpful? Thank you for your feedback! -
If you are experiencing issues with your headphones' Bluetooth disconnecting and reconnecting while on standby, there is a new Firmware Update app to resolve this issue. Start by downloading the app "JBL Firmware Update" (see links below).
Google Play Store: https://play.google.com/store/apps/details?id=com.jbl.tune.update
App Store: https://apps.apple.com/gb/app/jbl-firmware-update/id1548227663
Once downloaded, you can update your headphones firmware from there.
Below you can see step by step images of the update process.
Was this helpful? Thank you for your feedback! -
Try all Flex Fit Ear fins included (S/M/L) to find a snug fit for stability during workout. Usually the biggest size that fits comfortably in your ear will provide the most stability. Try all ear tip sizes (S/M/L) to find a snug seal for optimum sound quality, and look for a balance of comfort and acoustic sealing.Was this helpful? Thank you for your feedback!
-
To power on the device, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audible voice stating, “powering on” and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the Focus 500/700 Wireless headphone. Once you select that option, the audible voice should state, “connected”. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible voice stating, “powering on….looking for device” You will see the Bluetooth light alternate between red and blue when it is in pairing mode. Once connected the Bluetooth will change to a flashing LED light and the audible voice will state, “connected”.Was this helpful? Thank you for your feedback!
-
Horizon's alarm sounds for 3 minutes, then it shuts off, or rather it goes into snooze, for 9 minutes. Then it sounds the alarm again for 3 minutes, followed by snooze for another 9 minutes. After this final snooze period, it starts playing, and keeps on playing until it is manually shut off. The light shuts off with the audio.Was this helpful? Thank you for your feedback!
-
For JBL Quantum 100/200/300 models, they do not offer Game-Chat audio dial function.
To get the Game-Chat dial feature, you need JBL Quantum 400, and up, then you can adjust game-chat balance by rotating the dial-up and down.
For models that support Game-Chat dial, when you rotate the dial, you will feel a notch that indicates 50% game and 50% chat. Or you can see the status on the top bar of the JBL QuantumENGINE.Was this helpful? Thank you for your feedback! -
These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon-Fri 8:00 AM to 5:00 PM (AEST)