JBL Tune 600BTNC

JBL Tune 600BTNC

Wireless, on-ear, active noise-cancelling headphones.

Sold from 2018 until now

Getting started with your JBL Tune 600BTNC

Getting started with your JBL Tune 600BTNC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
32.0
Driver sensitivity at 1kHz/1mW (dB)
100dB
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
32.0
Number of drivers per ear
1.0
Weight (g)
173.0
Weight (oz)
6.1
Bluetooth profiles
HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.5
Bluetooth frequency
2.402GHz-2.48GH
Bluetooth transmitted modulation
GFSK, /4DQPSK, 8DPSK
Bluetooth transmitter power
0-4 dbm
Bluetooth version
4.1
Charging time (hours from empty)
2.0
Maximum music play time with ANC off (hours)
22.0
Maximum music play time with ANC on (hours)
12.0
Maximum play time (hours)
22.0
Maximum talk time (hours)
22.0
Bluetooth
Yes
Active Noise Cancelling
Yes
Built-in Microphone
Yes
Detachable Cable
Yes
Flat-fold design
Yes
Hands Free Call
Yes
JBL Pure Bass Sound
Yes
On-ear
Yes
Rechargable battery
Yes
Controls on Ear Cups?
Yes
Speed charge
No
Wireless
Yes

Your music, noise free

Introducing the JBL TUNE600BTNC active noise-cancelling wireless on-ear headphones, a flat-folding lightweight and compact solution for everyday use. The JBL TUNE600BTNC feature 32mm JBL drivers that helps deliver JBL Pure Bass sound. Sound that can be enjoyed without unnecessary noise for up to 12 hours wirelessly and can be fully recharged in only 2 hours. And thanks to the additional detachable cable, music can be enjoyed endlessly in wired mode, with or without Active Noise-Cancelling. Made with durable materials and designed in four fresh colors, the JBL TUNE600BTNC allow you to connect to your world quickly thanks to buttons on the ear cups that allow for easy hands-free management of calls and music.

Keep the noise out and enjoy your music.
For over 70 years, JBL has engineered the precise, impressive sound found in big venues around the world. These headphones reproduce that same JBL sound, punching out bass that’s both deep and powerful.
Wirelessly stream high-quality sound from your smartphone or tablet without messy cords.
Listen wirelessly for up to 12 hours with active noise cancelling for long-lasting fun. Recharge the battery quickly in 2 hours.
Easily control your sound and manage your calls from your headphones with the convenient three-button remote with mic.
Lightweight materials make these comfortable on your ears, and a rugged construction ensures these headphones fold and unfold perfectly over the years.

FAQs & How-Tos

6 results
  • Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.
  • Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.
  • In order to reset the headphones: 

    Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device. 
    When reseting, LED will blink faster. 
  • Yes, but only via cable, and noise cancelling cannot be activated meanwhile. Since the charging socket is located on top of the ear pod, adjustment is limited in that direction while the micro-USB plug is inserted.
  • No. The 600BTNC headphone does not feature any IPX rating that protects it against sweat or water. Over exposure to water can compromise the controls on the headphones.
  • In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +61 291510376

Mon-Fri 8:00 AM to 5:00 PM (AEST)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon-Fri 8:00 AM to 5:00 PM (AEST)