JBL Tour Pro 3
True Adaptive Noise Cancelling earbuds with JBL Spatial 360 headtracking and an audio transmitter Smart Charging Case™
Getting started with your JBL Tour Pro 3
Documents & Downloads
Product Specifications
- Driver size (mm)
- 10.2 mm/ 0.402" Dynamic Driver + 5.1 mm x 2.8 mm Balanced Armature
- Number of Microphones
- 6
- Driver sensitivity at 1kHz/1mW (dB)
- 104
- Dynamic frequency response range (Hz)
- 20 Hz - 40 kHz
- Impedance (ohms)
- 32
- Charging Case Weight (g)
- 71.8
- Charging Case Weight (oz)
- 2.5
- Earpiece Weight (g)
- 5.6
- Weight (g)
- 83
- Weight (oz)
- 2.9
- Bluetooth profiles
- A2DP V1.4, AVRCP V1.6.2, HFP V1.8
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4-DQPSK, 8DPSK
- Bluetooth transmitter power
- <13 dBm (EIRP)
- Bluetooth version
- 5.3
- Speed Charging time (hours)
- 3
- Charging case battery life (max hours)
- 33
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 11
- Maximum music play time with ANC on (hours)
- 7
- Maximum play time (hours)
- 44
- Maximum talk time (hours)
- 5.5
- Spatial Sound
- Yes
- Smart case
- Yes
- JBL Original Pro Sound
- Yes
- True Adaptive Noise Cancelling
- Yes
- JBL Headphone App
- Yes
- Bluetooth
- Yes
- Charging cable
- Yes
- Built-in Microphone
- Yes
- Charging case
- Yes
- Rechargable battery
- Yes
- Touch Control
- Yes
- True Wireless
- Yes
- Water Resistant
- Yes
- Wireless
- Yes
- IP Code
- 55
Sound, like you never heard before
Get ready for the smartest True Wireless earbuds yet. JBL Tour Pro 3 earbuds come in a newly redesigned Smart Charging Case™ with a handy and more feature-packed touchscreen, giving you full control over your listening experience—while your phone stays in your pocket. Connect seamlessly with any Bluetooth® device and immerse yourself in your music, movies, and games with JBL Spatial 360 sound with head tracking. The JBL Tour Pro 3 are also powered by legendary Hi-Res JBL Pro Sound. When it’s time to work, tune out the world with Real-Time True Adaptive Noise Cancelling. On a flight, use the Smart Charging Case™ as an audio transmitter dongle to wirelessly connect to the inflight system (or PC) and enjoy cinematic sound experience while you're in the air. Or at your desk, easily connect the Smart Charging Case™ to your computer, for perfect call quality.
FAQs & How-Tos
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with Us
Mon-Fri 8:00 AM to 5:00 PM (AEST)