Support Overview / Car & Marine / Car Electronics / Amplifiers / Amplifiers (4-channel) / GRAND TOURING GTO 804EZ
GRAND TOURING GTO 804EZ

GRAND TOURING GTO 804EZ

4-channel amplifier (80 watts x 4)

Sold from 2012 until now

Predecessor Product: GT5-A604
Made in: China

Getting started with your GRAND TOURING GTO 804EZ

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Type
4-Channel
Series
Grand Touring
MSRP U.S.
$359.95 each
Number of Channels/Type
4 Channels
Frequency Response
20Hz-23kHz
Signal-to-Noise Ratio
>85dB
2-Ohm Power Output
100W RMS x 4 channels at 2 ohms, 14.4V DC, less than 1.0% THD
Peak Power
940W
Maximum Current Draw
60A
4-Ohm Power Output
80W RMS x 4 channels at 4 ohms, 14.4V DC, less than 1.0% THD
Depth (mm)
302
Width (in)
9-11/16
Weight (kg)
3.8
Height (in)
2-9/16
Height (mm)
66
Weight (lb)
8.4
Depth (in)
11-15/16
Width (mm)
246

High-performance multichannel power for enhanced sound on the move.

It’s common knowledge that the performance of even the best automotive amplifier can only be as good as its installation and setup. That’s why the new GTO line of amplifiers is designed to take the guesswork out of this process. Large, clearly marked knobs and color-coded LEDs, along with the included setup CD, make dialing in perfect sound easy. For upgrading a factory system, the GTO amplifiers make signal connection simple. No additional signal converters, adapters or plugs are necessary because everything is included in the box. The complete line of GTO amplifiers includes chassis sizes, output-power capabilities and configurations sure to fit any car, any system and nearly any budget, and all are backed by the JBL® reputation for top quality.

The GTO-804EZ four-channel model features 4x80 watts RMS (940 watts max). It has selectable high-pass/low-pass active crossovers and bridgeable channel pairs for total flexibility. Use this amplifier to upgrade from four channels of built-in head-unit power in an aftermarket system, as a building block in a growing system design or, by bridging both channel pairs, as a more powerful amplifier for premium component speakers.
The GTO-804EZ amplifier includes an input-level switch, a setup CD with test signals and LED indicators to tell you when the setting is correct. Simply set the switch, turn the input-level knob and watch for the green light that indicates that the setup is perfect. That’s all there is to it. There’s a reason why the amplifier’s model number contains EZ. This feature significantly reduces installation time and delivers excellent results.
JBL engineers have configured the JBL GTO-804EZ amplifier to turn on with a wired input (as in aftermarket systems) or with an auto-sensing circuit that activates whenever the amp detects an audio signal. The auto-sensing feature is helpful when you’re upgrading OEM audio systems that don’t include a remote trigger wire. It’s easily defeated by a switch when you’re using a wired remote turn-on input.
The GTO-804EZ amplifier accepts a wide range of inputs up to 15 volts with line-level or speaker-level signals. Using RCA-to-bare-wire adapters included with the amplifier, you can connect to virtually any OEM or aftermarket audio system. The end result is an amplifier that works with the widest range of cars on the road.
Active 12-decibel/octave low-pass crossovers offer variable filter points between 40Hz and 280Hz. You can select high-pass (HP) filtering, low-pass (LP) filtering or OFF. Importantly, all filter points on the adjustment dial match the silkscreened frequency points on the amplifier chassis – a feature that not all amps provide.
The GTO-804EZ provides a range of bass boost from 0 decibels to +12 decibels, centred at 45Hz. This is a useful feature for restoring some bass that may be limited by the low-frequency response of certain speakers in the system – or to enhance a particular range of bass that the speakers already produce well.
Pairs of the GTO-804EZ system amplifier’s main channels can be bridged into a single, more powerful channel. This setup is useful for flexible audio system designs in a growing system or for full-range speakers in a system that needs more power.
Amplifier protection is just like insurance; you hope you’ll never need it, but it’s sure nice to have when you do. Thermal protection keeps the GTO-804EZ system amplifier from overworking itself to the point of premature failure. Low-impedance protection keeps the amplifier safe from any speaker or wiring failures that result in short circuits.

Images & Videos

  • GRAND TOURING GTO 804EZ - Black - 4-channel amplifier (80 watts x 4) - Hero
  • GRAND TOURING GTO 804EZ - Black - 4-channel amplifier (80 watts x 4) - Hero
  • GRAND TOURING GTO 804EZ - Black - 4-channel amplifier (80 watts x 4) - Front
  • GRAND TOURING GTO 804EZ - Black - 4-channel amplifier (80 watts x 4) - Back
  • GRAND TOURING GTO 804EZ - Black - 4-channel amplifier (80 watts x 4) - Left

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +61 291510376

Mon-Fri 8:00 AM to 5:00 PM (AEST)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon-Fri 8:00 AM to 5:00 PM (AEST)