Support Überblick / Lautsprecher / wand/deckenintegriert / PERFORMANCE P941

PERFORMANCE P941

3-Way 9 inch (225mm) In-Wall Speaker

Verkauft von 2005 bis 2009

Hergestellt in:	Mexico

Dokumente & Downloads

Benutzerhandbücher

Bedienungsanleitung (Englisch) 1.3 MB

Anderes

DIY Troubleshooting (Englisch) 344.96 KB

Produktdetails

Allgemeine Spezifikationen

Recommended Amplifier Power (RMS): 15W – 200W

Nominal Impedance: 8 ohms

Sensitivity (2.83 volts @ 1 meter): 89dB

Frequency Response: 32Hz – 20kHz (-6db)

Crossover Frequency(ies): 300Hz, 2kHz; 24dB/Octave

High-Frequency Transducer (Tweeter): 1 inch (25mm) Pure-titanium dome

Midrange Transducer: 3-1/2 inch

Low-Frequency Transducer (Woofer): 9 inch OCC (Organic Ceramic Composite)

Baffle: Cast aluminum

Port: None

Network: SSP (Straight-Line Signal Path)

Grille Material and Finish: Gray cloth with metal wire frame

Terminals: 5-Way, gold-plated binding posts

Finish: Black

MSRP U.S.: $1649.95 each

Abmessungen

Weight: 15 lb/7kg

Dimensions (H x W x D): 20-5/8 inch x 13-9/16 inch x 3-1/2 inch (515mm x 345mm x 89mm)

Cutout Dimensions: 19-1/8 inch x 12-1/2 inch (486mm x 318mm)

The JBL P941 is the most refined in wall loudspeaker system to ever bear the JBL brand mark. The Speaker system is a 3 way 9 “ design using fourth order crossovers for exceptional detail and quality components throughout usually found only in high end in-room loudspeakers. The aluminum front baffle is inert and resistant to resonances when used with the included proprietary frame mount that is installed into the wall. The speaker may be used as a dedicated primary music speaker, superb background music speaker or in and a multi-channel music and move system. The P941 is an unbelievable buy and quantities are very limited.