ON AIR WEM 1 - Black - Wireless Expansion Module - Hero ON AIR WEM 1 - Black - Wireless Expansion Module - Hero
ON AIR WEM 1 - Black - Wireless Expansion Module - Hero

ON AIR WEM 1

Surrounding yourself with sound doesn’t have to mean wires everywhere and more holes in your walls, floors or ceilings. The JBL® WEM-1 sets your speakers free. It has a 50-watt-per-channel amplifier and receives crisp signals from 70 ft away. Its optimal-performance, proprietary system delivers JBL sound in an easy-setup, clutter-free system.

Especificaciones del producto

Especificaciones generales

Included Mounting Hardware 1 Front
Series Wireless

Especificaciones de sonido

Audio Frequency Range (+0dB, –1dB) 20Hz – 20kHz
Amplifier Power Output 50 per channel
Audio Sensing Turn-On/Turn-Off Standby mode after approximately 10 minutes, when no signal is detected from your system. The WEM-1 will then power on instantly when a signal is detected.
Signal-to-Noise Ratio 80dBA

Dimensiones

Receiver Module Width (in) 6-3/16
Transmitter Module Width (in) 6
Receiver Module Depth (mm) 116
Receiver Module Width (mm) 158
Receiver Module Weight (lb) 0.9
Receiver Module Height (in) 1-1/8
Receiver Module Depth (in) 4-5/8
Transmitter Module Weight (kg) 0.3
Transmitter Module Depth (in) 3-7/8
Transmitter Module Height (in) 1-1/8 (3-3/4 high with antenna extended)
Receiver Module Weight (kg) 0.4
Receiver Module Height (mm) 29 (95 high with antenna extended)
Transmitter Module Weight (lb) 0.6

Especificaciones del sistema inalámbrico

RF Operating Range Up to 70' (22m), depending upon conditions
RF Operating Frequency 2.4GHz
Adjustable EQ 6 Settings
Selectable RF Channel Rear

Especificaciones de conexión y control

Speaker Output Connections 1 Rear
Subwoofer Output Connection 1 Rear
Speaker-Level Input Connections 1 Rear
Consulta los documentos para ver las especificaciones en profundidad

Documentos y descargas

Fichas de especificaciones

Contenido de la caja

  • (1) Receiver-amplifier module
  • (1) 6' (1.8m) audio stereo cable RCA-RCA
  • (1) Wall-mount bracket for transmitter
  • (2) Panhead M3s, (4) machine screws for wall-mount bracket to transmitter
  • (1) USA warranty sheet
  • (1) Owner's Manual
  • (1) Transmitter module
  • (1) 120V AC power cord for receiver-amplifier power supply, (1) 230V AC power cord for receiver-amplifier power supply - Shuko plug, (1) 230V AC power cord for receiver-amplifier power supply - UK plug
  • (2) Wall-mount brackets for receiver
  • (1) Handheld remote control
  • (1) Pedestal to be attached on receiver's left side if it is used vertically
  • (1) 120V AC power cord for transmitter power supply, (1) 230V AC power cord for transmitter power supply - Shuko plug, (1) 230V AC power cord for transmitter power supply - UK plug
  • (1) Power supply for transmitter
  • (4) Small, round, self-adhesive feet - to be attached on transmitters left side panel if transmitter is used vertically

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

¿No encuentras lo que buscas?

Posventa

Posventa

Habla con un experto sobre nuestros productos
Posventa a este número: 0800 362 0008

De Lunes a Viernes:
09:00 a.m a 6:00 p.m
Sábados:
09:00 a.m a 12:00 p.m