Resumen de Soporte / Coche y Nautica / Altavoces para coche / Multielemento / POWER P662S
POWER P662S

POWER P662S

6 1/2 inch 2-Way Shallow Mount

Vendido desde 2008 hasta ahora

Producto predecesor: POWER P652S
Hecho en: China

Empezando con su POWER P662S

Product Registration

Registre su producto

¿Es propietario de este producto? ¡Regístrelo aquí! Y reclame su garantía o servicio fácilmente

Regístrese ahora

Documentos y descargas

Especificaciones del producto

Series
Power Series
Size
6-1/2
Type
Two-Way
MSRP U.S.
$169.95 per pair
Sensitivity
(2.83V@1m) 93dB
Power Handling (Peak)
165W
Frequency Response
55Hz-23Hz
Nominal Impedance
2 ohms
Power Handling (RMS)
55W
Mounting Cutout Diameter (in)
5-1/6
Mounting Cutout Diameter (mm)
128.6
External Diameter (in)
6-1/4
External Diameter (mm)
158.2
Ultra High Frequency Transducer
High-bandwidth, edge-driven, textile-dome tweeter

6-1/2 inch 2-Way Shallow-Mount Loudspeaker with Plus One HCL woofer cone and high-bandwidth edge-driven textile dome tweeter

The Plus One® Honeycomb-Laminate™ woofer cone is exceptionally stiff and lightweight, with up to 25 percent more active surface area than a standard one of the same size. With a long-excursion surround, it boosts bass output and efficiency by 2 to 3 decibels compared with others.
It’s not the miniatures that most others use, but a high-bandwidth, edge-driven textile-dome tweeter like those found in very high-end home audio loudspeakers. Crank it up. You get less distortion even at high volumes and superior integration with the woofer.
The JBL® P662s has tweeter-level control. Use the simple switch to set the tweeter output level to match your personal listening preference, or different mounting locations.
You’ll have 55 watts RMS and 165 watts peak power handing. And push them to the limit. You’ll hear true JBL® sound, with nothing under- or over-emphasized. The P662s has a frequency response of 45Hz to 23kHz.
In addition to better sound quality, the new, proprietary, JBL-patented woofer design offers far higher SPL (sound pressure level) and better suspension symmetry for lower distortion than the previous generation.
These speakers make the best use of any amplifier by providing an optimum 2-ohm load. They use a lower-impedance voice coil than a typical speaker to extract the most power and performance possible from all amplifiers engineered to drive loads of 4 ohms or less.
Outboard crossovers are integrated into a harness connected to each speaker for easy installation. Oversized Direct-Connect terminals ensure perfect connectivity for bare speaker wires.

Imágenes y vídeos

POWER P662S - Black - 6 1/2 inch 2-Way Shallow Mount - Hero
  • POWER P662S - Black - 6 1/2 inch 2-Way Shallow Mount - Hero

¿No encuentras lo que buscas?

Contacte con Nosotros

 

Si compraste en JBL y necesitás realizar una consulta o información sobre tu pedido,

buscas el Live Chat en  JBL.com 

Horario de Atención

De Lunes a Viernes: 08:00 a.m a 6:00 p.m
Sábados: 09:00 a.m a 12:00 p.m

 

Si necesita atención con respecto al soporte del producto o garantías después de 10 días de la compra, contáctenos utilizando nuestros canales de la sección "Contáctanos".

Posventa

Posventa

Habla con un experto sobre nuestros productos
Posventa a este número: 0800-333-0212

De Lunes a Viernes:
09:00 a.m a 6:00 p.m
Sábados:
09:00 a.m a 12:00 p.m

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico